Hastelloy C276 elbow
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5° elbows are also made.
There are many different kinds of fittings, made from a variety of materials: some of the most common types are elbows, tees, wyes, crosses, couplings, unions, compression fittings, caps, plugs and valves.
Elbow mainly available in two standard types 90° and 45°. However, it Can be cut to any other degree. Elbows are available in two radius types, Short radius (1D) and Long Radius (1.5D).
Hastelloy C276 Elbow Butt Weld Pipe Fittings (UNS N10276) is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. Ganpat Industrial Corporation is one of the well – known trader and dealer of Hastelloy C276 Tee Butt Weld Pipe Fittings, which is used in chemical process equipment and desulfurization of flue gas equipment. Hastelloy C276 Cross Butt Weld Pipe Fittings has excellent corrosion resistance in a wide range of corrosive media including, sulphur compounds and chloride ions. Hastelloy C276 Pipe Reducer is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process applications in an as welded condition. Meanwhile, these Hastelloy C276 Pipe Bend are also being offered in customized sizes and shapes to our customers. The addition of a small percentage of the alloying elements under consideration makes Hastelloy C276 Stub End Butt Weld Pipe Fittings possible to retard the transformation more effectively and hence to produce better physical properties. By increasing the content of nickel, the transformation range of Hastelloy C276 End Pipe Cap is finally lowered to a point below normal atmospheric temperature.
Hastelloy C276 Pipe Fittings Specifications
||ASTM B366 / ASME SB366
||Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
||ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
||5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
||Seamless / Welded / Fabricated
Hastelloy C276 Pipe Fittings Chemical Composition
||15 – 17
||4 – 7
||14.5 – 16.5
Hastelloy C276 Buttweld Fittings Mechanical Properties
||Yield Strength (0.2%Offset)
||1370 °C (2500 °F)
||Psi – 52,000 , MPa – 355
||Psi – 1,15,000 , MPa – 790
Equivalent Grades for C276 Hastelloy Pipe Fitting
Sea Water Equipment
Pulp and Paper Industry