Inconel 601 ke alloy e nang le alloy le chromium.

Comnanel aloy 718? ke afloy e nang le nickel e kholo, chromium le molybdenum. Ke e 'ngoe ea li-supelney tse thehiloeng ka ho fetisisa tsa tlhaho ebile li sebelisoa haholo bakeng sa ho hanyetsa libaka tsa eona tse matla tse kang li-crevice le li-corosion.

Litoro tsa alloy 201 li sebelisoa ho etsa anye le tšepe e se nang mabili. Li-flong tsa Nickel 201 li entsoe ka alloy ea nickel le chroroma ka ho ba le karolo e itseng ea Silecle, tšepe le mangene. Litoro tsena tsa Nickel Roloy 201 Liphulaloana tsena li boetse li sebelisoa ho li-turbine hammoho le limela tsa ho tloha moo metsi a leoatle, moo leoatle la leoatle le fetotsoeng ka metsi a hloekileng.

Photoonel 718 Hex Nuts e fana ka matla a phahameng le ho etsa sehlōhō. Ho feta moo, li tsebahala ka bokhoni ba tsona bo matla le ho fumaneha ho 1800¡. Ho hanyetsa bokokoana bo hlorisang ka ho khetheha hoa mocheso o phahameng oa mocheso o bakoa ke litaba tsa nickel-chromium, leha e hanyetsanang le khatello ea maikutlo ea chloride crocking. Ho eketsa MolyBdenum ho Alloy e thusa ho thibela moqomo oa sekoti.

Hookvel 601 BW elbow bakeng sa libaskete le likheo tse sebelisoang kalafong e fapaneng ea mocheso tse kang ho ts'oaroa ha carburizing le carbon nitididing

Asme B18.2.2 Hex Nuts in Minnel 718 2.4668 Nuts NitsLY NUTM

Baenjiniere ba rona ba etsa likheo tsena tse phahameng tse phahameng ka litekanyetso tse fapaneng tsa lipalo tse fapaneng, boholo, bosekoe, boholo, boholo le tse ling. Ho latela litlhoko tsa moreki, re fana ka lifofane tsa moetlo le tseo e seng tsa moetlo li le boima haholo.

Ha e na tlhaselo e fokolang kapa ha e na tlhaselong le mocheso o phahameng ka likhase tse omeletseng, tse kang chlorine kapa hydrogen chloride. Masefong ho fihlela ka 550c mecheng ena ea litaba, anyetsana e bontšitsoe ke e sa phekoang ka ho fetisisa ea li-alloys tse tloaelehileng.

1Comender ea 1 inch "

Inconel 718 flangs e na le thepa e ntle haholo ea hore na e na le mocheso o phallang. Tsena li-intonel tse 718 li na le matla a phahameng a ho ruruha li-process tse phahameng haholo ho fihlela likhato tse 700 tsa Celsius (1280 Deverhere). Sebaka sa rona sa lifofane sa 718 se kopanya khanyetso ea corrosance le matla a phahameng ka ho tsitsa ho itlhoekisa ka ho fetisisa.

Ho na le mefuta e fapaneng ea li-flangs tse kang alloy 625 li thella kantlee le tse ling. Mefuta ena kaofela ke ea litlhaloso tsa Ast B564 bakeng sa nickel alloy alloy alloy alloy alloy allow. Mefuta e mengata ho tloha ho li-inches tsa ½ ho isa ho tse 60 ho ea ka mofuta oa li-flangs. Ho sa natse beng ba N06625 Blrf ke e 'ngoe ea mofuta o nang le sefahleho le ho phahamisoa. Li-flangs tse foufetseng li sebelisetsoa ho felisa khokahano. Ba tla ka sefahleho se phahamisitsoeng ha ho hlokahala hore ho be le mehloli ea mongana kapa ho ipolaisa. Li-flangs li ka tla tlasa Ansi, Asme B16.5, B16.47 le litekanyetso tse ling.

Ntho e 'ngoe eo u ka e tsotellang ka litlhōrō tsa li-comnel 718 ke hore li na le mokhoa o motle, ho kenyelletsa ho hanyetsa ho hanela ho sesa ka weld.

Astm B564 601 Ho phahamisoa sefahleho 601 ke moitlami ea Amony-chromium o sebelisitsoeng bakeng sa lits'ebetso tse hlokang likopo le mocheso. Sebapali sena sa nickel se totobaletse ka lebaka la ho hanyetsa mocheso o phahameng, sethala se phahameng sa oxida se hlahang.

Li-inylel 718 ke alloy e nang le nickel e ngata, chromium le molybdenum. Ke e 'ngoe ea li-supelney tse thehiloeng ka ho fetisisa tsa tlhaho ebile li sebelisoa haholo bakeng sa ho hanyetsa libaka tsa eona tse matla tse kang li-crevice le li-corosion.

Inconel 625 Lits'oants'o tsa li-corrosion tse thibelang li-corrosion li na le corbonium, Manganese, Silfur, koporo. Navstar tšepe ke morekisi ea etellang pele ea morekisi le moetsi oa li-flangs tsa li-inconel tse 625 ka sekala le mefuta. Lintho tse ling tse ling tse ling tse ntle li na le matla a phahameng haholo a 930mpa le bonyane matla a 517Ma. Lintho tsena tse matla le tsona li na le ntlha ea likhato tse 1350 Celsius Celsius Celsius Celsius Celsius. Sena se etsa hore liphokojoe li sebelisoe likopo tse ling tse thata le tse sithabetsang.

Tlas'a maemo a fapaneng le maemo a fokotsehang le a fokotsa maemo, a haellang a ka utloa bohloko ka lebaka la oxidation e ikhethileng.

Ho fapana le liqhomane tse se nang thuso, li-somennel back, li-somen 625 tse potileng li fana ka molemo oo ba fanang ka molemo ha ba ka ba kotsing ea ho senyeha ha khatello ea maikutlo e amanang le chloride.

Hookvel 601 e ikokobelletsa botle ho loantšana le khatello ea maikutlo ea lijalo. Ka lebaka la taolo ea litaba tsa khabone le boholo ba lijo-thollo, kahoo ho khothalletsoa ho sebelisa 601 tšimong e kaholimo ho 500 ¡Ãc.

Inconel 718 ke feela ho anyesang-chromium e sebetsang e sebelisoang hangata ka lits'ebetso tsa mocheso tse phahameng joalo ka aerospace le li-turbine tsa khase. E 'ngoe ea lintlha tsa bohlokoa ka ho fetisisa tlhahisong ea asst asm B670 ea leqephe la 718 ke ts'ebetso ea poleiti. Ho na le mefuta e 'meli ea mantlha ea li-inconel 718 e fumanehang' marakeng: e chesang e halikiloeng le lipolanete tse batang tse halikiloeng.

Inconel 625 e bonts'a khatello e phahameng ea lihlapi le oxidation, matla a phahameng le matla bo botle haholo. Lehlakore lena le seng le se nang letho le ikhethang le boetse le fana ka mocheso o pharalletseng oa cryogenic ho ea 2,000 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° F (1,093 ° C).

Ke li-tubes tse 600 tse se nang leoatle tse sa khaotseng N06600 le Astm B167 li hlahisoang ho matlafatsa khatello e phahameng haholo 'me li tla le waranti e kholo.

400mm pa nickel alloy alloy

Ka thata, li-playes tse ikhethileng tse 625 li nkuoa e le papali e phethahetseng bakeng sa lisebelisoa tse kenyelletsang indasteri ea nyutlelie le ea metsing.

Boholo ba li-bolthara tse 625 li sebelisoa haholo ho potoloha le likopi tse futhumatsang. Li ka sebelisoa likopo tsa ho hanyetsa mehloli ea likhohlano. Li-bolts li sebelisoa li-casing tsa enjine, mekha ea mahe a linotsi le mela ea hydraulic. Phala ea HT ke sehlahisoa se etelletseng pele le morekisi oa Inconel 625 ka mefuta e fapaneng le boholo. Boitsebiso bo loantšana le li-crevice le li-cookie.

Li-alloys tsa nickel ke tse ling tsa thepa e sebetsang ka ho fetisisa bakeng sa ho fana ka lipeipi tse phahameng haholo le li-tubes tsa lits'ebetso tsa indasteri. Mamello ea bona ea tlhaho e etsa hore ba sebetse tšebeliso e fapaneng ea tšebeliso. Nickel Alloys ke asiti ea lihlahisoa tse ikhethang mme e ka sebelisoa libakeng tse phahameng.

Inconel 625 Lello se sebelisoang haholo ts'ebetsong ea lik'hemik'hale, taolo ea tšilafalo, babusi, babuelli ba nyutlelie le tse ling.

Ak'u tloaelehileng 625 Coil e tšoauoa ka ho hanyetsa hantle haholo ho oxidation, sekhope se phahameng le mokhathala. Astm b443 ha ho na poleiti ea N06625 e sebelisoang haholo ka lebaka la matla a lik'hemik'hale, ho thatafala le ho tšoarella le ho feta.

Li-infoy 718 flangs li hanyetsa ho hanyetsa ha mocheso oa tsona oa tšebeletso. Li-flang tsa rona tse 718 li lokela ho etsoa e le mechini e thata ebile e jaroa ka hohle kamoo ho ka khonehang.

Inconel 600 bolts e ka otlolla 40% mme e ntse e na le machine e ntle haholo. ALY 600 BOLL e na le ts'ebetso e ntle haholo ea Sreep ea Rupture e matlafatsang ka lithemparetjha tse phahameng. Li-bolts tsena li sebelisoa haholo ka boholo ba lichabeng tsa lik'hemik'hale le tsa tlhaho.

Inconel 718 Hex e sebelisoa ka litheko tsa mocheso tse kang jenereithara e phahameng, li-enkebines tsa khase, liphula tsa rocket, liphula, liphula le nyutlelie. Inconel bascount 718 Hex bolts ba batho ba matla joalo ka li-fasteners tse 625.

Comnonel ALYZER 718 e loketse ho sebelisoa maemong ana.inConel 718 e ka etsoa habonolo ebile e feta ka 30%.

Plate ea Nickel 718 e na le matla a phahameng ho feta aminonel x-750 le lisebelisoa tse ntle tsa mochini mochesong o tlase ho feta nimonic 90 le alloy x-7-750. Nickel 718 Coils Coils e fana ka thepa e ngata e tsebahalang e bapisoang le aluminium le titanium e thata-li-superal e thehiloeng nickel.

Photosops 625 Flanges, Photos 625 Belanges 625

Ka lebaka la khanyetso e ntle ea li-corrolon, combol li-bolche tsa 718 tsa Hex

Inconel Bar ke sa nickel-chromium e nang le li-nick tsa alloy tse nang le 55% Nickel ka sebopeho sa eona. Litaba tse ka sehloohong li kenyelletsa 17% chromium, 4.9% Niobium, ea Aluminium, Kolona, ​​Carpor, Searthose le Silicon. Boitsebiso bo na le matla a phahameng a ho qetela a 1375 Mpa le ba fokolang ba matla ho 1100 MPA.