1-2 – 60 elbows stainless steel pipe fittings for connection

A860 WPHY 42 Pipe Fittings are a pre-requisite for the conveyance of gas and oil in the high-pressure gas and oil transportation systems.

As the most pipe bending methods are quite cost-efficient, using bent pipes and tubes will have a minimal impact on the overall design budget when using the ideal length and sizing for your application.

Alloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures.

We insist on trying our fittings during processing to make sure it’s the ideal variety. Incoloy WNR 1.4876 Equal Diameter Tee Fittings are known for their robust construction, perfect finish, dimensional accuracy, elegant design, high reliability, perfect insulation and more. It is also known for its low maintenance, high durability, perfect design, easy operation, finish, simple installation, durability, perfect size, etc. To stay top-notch, it’s synthetic under the guidance of corporate experts. The pipe fittings we provide are widely demanded in enterprises because of their advanced and first-class construction and inflexible construction.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

The difference between 304 and 304L stainless steel is that 304L has a .03 max carbon and is good for welding whereas 304 has a mid range level of carbon.

One of the major concerns about the SS 304 Fitting is its low cost compared to other high end alloy material counterparts.All A403 gr WP304 Buttweld Elbow and 304 Pipe Fittings should experience heat-treatment.

Alloy 800 has higher mechanical properties at room temperature and during short-time exposure to elevated temperatures, whereas alloys 800H and 800HT have superior creep and rupture strength during extended high-temperature exposure.

The alloy is used in many fields, especially marine and chemical processing.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

200 is 99.6% pure nickel, one of the toughest metals. HT PIPE is a leading supplier and exporter of Nickel 200 butt welded and forged fittings. We supply Nickel Alloy 200 butt welded and forged fittings to all customers worldwide according to customer requirements.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

UNS S32205, S31803 Duplex Stainless Steel Fittings is an austenitic-ferritic stainless steel with superior corrosion resistance and high strength. It has good solderability and can be soldered by a variety of methods. Grade 1.4462 (also known as UNS S31803/S32205, F51 and SS2377) fittings are a stainless acid resistant duplex steel with high strength and excellent corrosion properties.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

Our SS 310S pipe fittings are made of low carbon austenitic steel known for its ability to resist corrosion, especially water corrosion and sulfidation in chemical and ore processing units.

Molybdenum-containing austenitic stainless steel DIN 1.4404 seamless pipe fittings are relatively low in carbon compared to DIN 1.4401 grades, but with small additions of molybdenum and nitrogen, and are used in light or moderately corrosive industries.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Long elbows as sanitary fittings are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

These curved products are used in the dairy, food, pharmaceutical, biotechnology and other industries for condensers, heat exchangers, process lines and product transport. We specialize in sanitary certified 316L stainless steel custom swept elbow production and provide mill test reports, our long radius elbows can provide sweeps up to 180 degrees. We offer a wide range of sizes – from 1″ to 10″ OD and tube lengths up to 72″, we can make the size you need.

Fortunately, both carbon steel and stainless steel are very affordable compared to nickel alloys. Carbon steel pipes are often listed as the cheapest steel for plumbing, but stainless steel is often a close second. It allows you to choose the right material that best suits your project without major consideration of cost.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

316 stainless steel pipe bend has very low responsiveness to magnetic fields. Unlike basic stainless steels, which are ferromagnetic, most stainless steel varieties (including 316) are austenitic ¡ª or effectively nonmagnetic.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A234 WP11 pipe fittings mean the pipe fittings which material are ASTM A234 WP11,they are used for the pressure piping systems of moderate and high temperature services.ASTM A234 is the standard of butt welding pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WP11 is one of the steel grade in this standard.

Our inventory includes but is not limited to carbon steel, stainless steel, PVC S80, CPVC S80 and specialty alloy materials. Our highly trained staff will help you with piping, flanges, fittings, structural shapes and related components.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Supplier of Stainless Steel 304 Elbow for Wheel Covers, Auto Trimming, Forming, Kitchenware, Hose Clamps, Stainless Steel Wire and more. These SS 304 concentric reducers also exhibit excellent ductility, spinning, forming and stretching properties. The alloys used to make these 304 stainless steel socket weld fittings are the most adaptable and widely used.

Stainless Steel 304 Fitting Elbow is an austenitic chromium alloy with a steel composition of 18% chromium and 8% nickel. Stainless steel 304 pipe fittings have high ductility, excellent forming, spinning and drawing properties.