1-24 inch ss 317L elbows stainless steel double ferrule compression fitting

Tensile Strength and Weight – Both carbon steel and stainless steel are quite high in tensile strength and weight. Piping applications are based on the requirements of the manufacturing program for the application. The ductility of the material depends on the gauge at the time of extrusion, which is similar for both alloys. Typically these fittings are milled; metalworking can expect similar results between the two materials. Manufacturers want materials that have the required ductility, such as adding aluminum to stainless steel, because of its corrosion resistance.

Alloy 400 is resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.

The ASTM A403 specification also requires Werkstoff No. 1.4436 316 stainless steel chemical composition fittings to meet standards for elements such as carbon, silicon, chromium, manganese, phosphorus, sulfur, molybdenum, and titanium. To check the conformance of these ASME B16.9 SS 316 fittings, they are subjected to chemical and product analysis.

When standard 90-degree elbows won¡¯t work with your system design or space requirements, bent pipes and tubing are an excellent routing option.

We are known for providing products according to the pressing requests of our esteemed customers. Our assembled SS 316/316L pipe connectors are of high quality and can withstand high pressure and high temperatures. For the manufacture of these fittings, we select high quality raw materials. These accessories are of high quality, such as a perfect finish, durability, excellent pitting resistance, low maintenance costs and a sturdy construction.

Duplex fittings have medium performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304. What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel.

Therefore, stainless steel elbows are widely used in high temperature applications. A403 WP316 elbows are widely used to change the direction of pipes and are available in different diameters, shapes and sizes. A403 WP304 elbows can be easily welded, but the material may face localized corrosion due to the risk of intergranular corrosion.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions.

Stainless steels 316 and 316L are the second most common stainless grades after 304/304L, and are higher versions of 304 with the addition of molybdenum and a slightly higher nickel content. Stainless Steel 316 has similar properties to Type 304, except Alloy 316 is stronger at high temperatures.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance in a wide range of marine and chemical environments and has freedom from chloride induced stress-corrosion cracking.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Inconel UNS N07718 Concentric Reducer Butt Weld Joints work harden rapidly during machining, generate high heat during cutting, weld to the cutting tool surface, and provide high resistance to metal removal due to its high shear strength. All types of Inconel 718 butt weld fittings are stocked in different sizes and shapes, and we can also manufacture to our customers’ standard specifications.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700¡ã F and molten sulfur attacks the alloy at temperatures over approximately 500¡ã F.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The greater content of alloying elements like chromium, molybdenum, and nitrogen in SD UNS S32750 tee helps material in withholding crevice corrosion and pitting. SD UNS S32750 cross is combining greater mechanical strength and with good ductility with resistance to corrosion in a different atmosphere.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

AISI 316 and 316L stainless steels offer increased resistance to atmospheric corrosion, many organic and inorganic chemicals, and food and beverages. 316L has a maximum carbon content of 0.03 and is suitable for welding, while 316 has a moderate carbon content.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

Super Duplex 2507 (F53 / 1.4410 / UNS S32750) has excellent corrosion resistance to a variety of media, and has excellent resistance to pitting and crevice corrosion in seawater and other chloride-containing environments, with a critical pitting temperature exceeding 50¡ãC.

HT PIPE is one of the leading manufacturers of different types of high-quality products, such as pipe fittings of different shapes, sizes, thicknesses, etc. On the other hand, we are also a major supplier and exporter of the popular product duplex steel UNS S31803 pipe fittings. Pipe fittings are manufactured to all national and international standards of our organization. There are many kinds of pipe fittings, which are widely used in piping systems for various purposes. They are both used to mount profiled pipes to each other. In this way, liquids, fluids, gases, etc. pass through the pipes without any leakage. Also, fittings come in many sizes, sizes, standards, alloys, grades, etc., but most importantly our Duplex 1.4462 fittings are the most demanded fittings on the market today and for many years.

In addition to our extensive inventory, HT PIPE stocks a wide variety of thermoplastic, sanitary, plastic lined and nickel alloy pipes, fittings and flanges. We have a full team of industrial sales experts who can answer any of your questions and find the material you need.

317L offers higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon grade which provides resistance to sensitization during welding and other thermal processes.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used.

The S31803 is used in many programs in unique industries such as superheaters, boilers, condensers, heat exchangers, chillers, coolers/intercoolers, etc. They are also used in unique industries such as fertilizer plants, oil refineries, steel mills, sugar industries, and more. Duplex WNR 1.4462 Forged Socket Weld Hex Plus Fittings done by run mode and follow steps to complete important radii with buyer drawing.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.