1-4 inch A815 duplex pipe fitting food grade 90 deg. elbows

Stainless steels 316 and 316L are the second most common stainless grades after 304/304L, and are higher versions of 304 with the addition of molybdenum and a slightly higher nickel content. Stainless Steel 316 has similar properties to Type 304, except Alloy 316 is stronger at high temperatures.

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

If embrittled, duplex S31803 end caps can only be corrected by full solution annealing. Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius. If embrittled, duplex S31803 end caps can only be corrected by full solution annealing.

Duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of two phases, austenite (face-centered cubic lattice) and ferrite (body centered cubic lattice) in roughly equal proportions. They are designed to provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength than standard austenitic stainless steels such as Type 304 or 316.

Monel 400 is widely used in Brine heaters, sea water scrubbers in tanker inert gas systems.

RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We are manufacturing Stainless steel 304/ 304L forged fittings in both socket weld and threaded form and Stainless steel 304/ 304L pipe bends in both standard and non standard sizes, with bending radius of 1D to 10D. We offer ex-stock delivery of various standard size and type Stainless steel 304/ 304L pipe fittings, Stainless steel 304/ 304L flanges and Stainless steel 304/ 304L pipe bends.

These fittings don‘t deform or dissociate easily at high pressures and elevated temperatures. The Alloy 600 Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa.

Stainless steel tees are pipe fittings and pipe joints for branch pipes of the main pipeline. Stainless steel tee is divided into equal diameter and different diameter. The size of the connecting end of the equal-diameter tee is the same, the size of the main pipe of the reducing tee is the same, and the branch pipe is smaller than the main pipe. The stainless steel threaded tee has three internal threads on the port. It is an industrial pipe fitting.

ASTM A234 WPB Sch 40 Fittings covers carbon steel fittings of welded and seamless development secured by the foremost later revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. A234 WPB Carbon Steel Fittings to boot exceedingly corrosion-resistant has low string contact and profitable where high alloyed steel is required.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

When titanium is mixed with other metals, the alloys can reach a tensile strength of more than 1,400 MPa, which makes 200,000 psi.

Long elbows as sanitary fittings are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions, and increases strength at high temperatures.

ASME B16.11 A403 Gr WP316L Threaded Fittings for Textiles, Pharmaceuticals, Condensers, Tanks and Evaporators. In addition to applications such as pressure vessels, industrial boilers, furnace components, threaded fasteners, and more, industrial manufacturers use these stainless steel 316L covers.

ASTM B163 B407 ASME SB163 SB407 N08800 Incoloy 800 Seamless Pipe is especially suitable for high temperature equipment in the petrochemical industry because the alloy does not form an embrittled sigma phase after prolonged exposure to 1200¡ãF (649¡ãC).

Stainless Steel 316L is an extra-low carbon version of the grade 316.

Grade 1.4404 or 316L is an austenitic stainless steel AISI 316 with very good corrosion resistance due to its high chromium and molybdenum content and low carbon content. Its strength in the hardened state is about 600 MPa for large diameters, but for small sections, the strength can be increased by cold working.

SS Stub end is available in normal pipe size and the dimension and tolerance of these pipes are defined as per ASTM B16.9. When compared to threaded and socket weld SS Buttweld fittings have many advantages. One of them being that the threaded and socket fittings are available in 4 inches whereas the buttweld fittings are available in the size range of ? inch to 72 inches.

Alloy 20 Industrial Fitting, Werkstoff No 2.4660 Alloy Butt Weld Tee, ANSI B16.28 Alloy 20 Cross, MSS SP-43/SP-79 Alloy 20 Stub End
ASME SB366M Alloy 20 Pipe Cap, ASME/ANSI B16.9 Alloy 20 Reducer, Alloy 20 ASTM B366 Welded Fitting, China B366 Alloy 20 Seamless Fitting Price

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless steel 304 elbow fittings are also used in shipbuilding, pressure vessels, boilers, construction, wind energy engineering, etc. Our stainless steel 304L tee fittings are also difficult to dilute sulfuric acid solutions to 120 degrees Fahrenheit.

Given our extensive expertise and knowledge in stainless steel industry we can offer stainless steel 316L tubing, at the most competitive prices in the Industry. We are a wholesaler for stainless, acid and heat-resistant steel pipes, fittings and flanges with extensive stocks.

Duplex stainless steel pipes and fittings are generally less expensive because of the lower proportions of alloying elements used in the manufacture of duplex stainless steels. The yield strength of duplex stainless steel products is higher than that of austenitic stainless steel products, so users can buy duplex pipes and duplex pipe fittings with relatively lower thickness.

ASTM A815 S32205 Fittings can efficiently be used in environments within 570 degrees F- post this temperature, these fittings will start losing their toughness. The S32750 Buttweld Fittings have some excellent mechanical properties such as high strength and resistance towards pitting and different types of corrosion. Our Super Duplex Steel S32750 reducer is also known for its strong weldability.

Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners.