Age-hardenable Nickel-Copper alloy Monel K500 N05500 prefabrication of Pipe Spools

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

The Monel K500 is essentially a stronger, stiffer version of the Monel 400. It exhibits the same high corrosion resistance as this alloy, with added aluminum and titanium content for increased strength and hardness. Monel K500? is heat treated under controlled conditions to precipitate submicroscopic particles of Ni 3 (Ti, Al) throughout the material.

The Alloy 400 Orifice Flange is a special type that is used to fit pipes together with an orifice. The minimum yield strength of the material is at 195MPa and the minimum tensile strength is 480MPa.

Monel K500 Bolts, also known as Alloy K500, are composed of a nickel alloy that combines the excellent corrosion resistance of Monel 400 with increased strength and hardness. These additional properties of Monel K500 bolts are the result of an age hardening process in which aluminum and titanium are added to a nickel-copper matrix, which is then precipitated throughout. Compared to 400, this process increases the yield strength of K500 by a factor of approximately 3 (110ksi vs. 45ksi) and doubles the tensile strength (160ksi vs. 83ksi). Monel K500 bolts will maintain their strength down to 1200¡ãF and even maintain their ductility down to -400¡ãF.

The corrosion resistance of Monel K-500 is basically the same as Alloy 400, except that in the age hardened condition, Alloy K-500 has a greater tendency to stress corrosion cracking in certain environments. Monel K-500 has been found to be resistant to sour gas environments.

Monel 400 is widely used in Feed water and steam generator tubing.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Monel 400 flanges are also available for higher temperatures in reduction environments. While Monel 400 flanges are typically used at elevated temperatures, they retain their mechanical properties at sub-zero temperatures. The increased hardness at freezing temperatures has been shown to only slightly impair the ductility or impact resistance of Monel 400 flanges.

Las aplicaciones tipicas de la alta resistencia y resistencia a la corrosion de MONEL K500 son ejes de bombas, impulsores, ejes de helices, componentes de valvulas para barcos y torres de perforacion en alta mar, pernos, collares de pozos de petroleo y componentes de instrumentacion para la produccion de petroleo y gas.

The alloy has great mechanical properties at subzero temperatures, and with a melting point of 2370¡ã ¨C 2460¡ã F, products can be used at temperatures up to 1000¡ã C.

We manufacture Monel K500 flanges from nickel and copper alloys. The material has excellent resistance to aggressive materials and solutions such as oxidizing salts, acids, nitrates and other oxidizing agents.

Monel 400 is essential in heat exchangers, chemical plant equipment, and boiler feeders. It is ideal in wire or rod form and is excellent for trolling wire due to its resistance to seawater.

Monel 400 operates in a wide range of acidic and alkaline environments and has excellent ductility and thermal conductivity. Its properties make it ideal for heavy-duty applications and those requiring a high melting point and toughness in the harshest conditions.

It is not useful in oxidizing acids, such as nitric acid and nitrous.

Typical applications for Monel K500 grade rods include those tasks that take advantage of the alloy’s high tensile strength and corrosion resistance. For example, Monel B865 K500 forged bar can be used to make impellers, propeller shafts, pump shafts.

The resistance of the Monel 2.4360 eccentric/concentric reducer to salt solutions and its excellent resistance to stress-related corrosion cracking make the Monel 2.4360 eccentric/concentric reducer ideal for surviving in most freshwater bodies.

Unique among Monel alloys, ASTM B165 Monel Seamless and Welded Pipe is considered a Puritan alloy because it contains the same nickel and copper content as the natural nickel ore found in the Sudbury mine in Ontario, Canada.

These Monel 400 pipes have high strength and toughness over a wide temperature range and have excellent resistance to many corrosive environments.

The corrosion resistance of Monel K500 Weld Neck Flanges is substantially equivalent to that of alloy 400 Weld Neck Flanges except that, when in the age ¨C hardened condition, it has a greater tendency toward stress ¨C corrosion cracking in some environments.

In fact, in comparison to nickel, the corrosion resistance properties of UNS N04400 Orifice Flange tend to be much higher than nickel itself.

The Alloy K500 Studs are threaded rods with threads on both ends. They can be different types depending on the threaded distance from the center and the thread type. The material is high temperature and high pressure resistant. It has 1350 degrees Celsius melting point, 790MPa minimum yield strength and 1100MPa minimum tensile strength. These values are double the strength of 304 grade.

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut with a nylon collar that increases friction on the screw thread.

2.4375 Monel K500 round bar is non-magnetic, as an alloy, Monel K500 ASTM B865 hexagonal bar exhibits excellent mechanical properties over a temperature range from sub-zero settings to 480C. Monel ASTM B865 hollow bars require annealing when welded, and weldments should be stress relieved to the alloy prior to aging.

Alloy 400 is a solid solution alloy that can only be hardened by cold working.

Monel 400 has excellent corrosion resistance in hot concentrated alkaline solution.

Alloy 400 Seamless Pipe exhibits excellent resistance to not only caustic solutions but also brine and seawater, which makes it perfect for marine applications.

ASME Sb564 Alloy 400 Plate Flanges Monel 400 N04400 Orifice Flange A nickel-copper alloy, Monel 400 flanges are a solid solution nickel alloy that can only be hardened by cold working. Best known for its corrosion resistance to reducing media and seawater, Monel 400 is also tougher in oxidizing environments than copper alloys. Also known as alloy 400, Monel 400 flanges are also utilized in high temperature, caustic and salt solution applications.

Alloy K500 studs are threaded rods with threads on both ends. They can be of different types depending on thread distance from center and thread type. The material is resistant to high temperature and high pressure. It has a melting point of 1350 degrees Celsius, a minimum yield strength of 790MPa and a minimum tensile strength of 1100MPa. These values are twice as strong as level 304.

Studs are threaded at both ends and the middle screw, either thick or thin.It is generally used in mining machinery, Bridges, automobiles, motorcycles, boiler steel structure, pylon, long-span steel structure and large buildings. A bolt is a screw with a larger diameter or without a head, such as a stud.

Socket weld flanges were originally developed for small high pressure pipelines. They have the same static strength as slip-on flanges, but their fatigue strength is 50% higher than double-welded slip-on flanges.

This is a nickel-copper, solid-solution alloy that is hardenable only by cold working. It has high strength and toughness over a wide temperature range and is resistant to many corrosive environments.