Nickel alloy alloy 625 UNS N06625 concentric reducer ASTM ASME SB 366 fittings

It can be easily formed. Our duplex steel fittings are austenitic-ferritic stainless steels for corrosive environments that resist localized corrosion such as pitting, crevice corrosion and stress corrosion cracking.

Large selection of finished and semi-finished stainless steel caps/end caps, crosses, elbows, reducers, tees, stub ends and many other stainless steel butt weld fittings for use in power plants, oil and gas, water treatment, food processing , petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in conjunction with our other plumbing products.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

One alloy that falls into the austenitic category is stainless steel 304 pipe fittings. Not only is this alloy very economical, but the metal has good strength and moderate corrosion resistance. The utility of these 304 stainless steel pipe fittings is for those industries looking for economical components that add value to their piping systems.

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings.

It is even resistant to strong liquids such as sulfuric acid, wet chlorine gas, chloride solutions, hydrochloric acid and most organic acids. However, it can burn in air and is the only element that will burn in the presence of nitrogen.

This action draws the pipe or tube forward making the desired bend.

The properties of ASTM A860 Grade WPHY 56 Buttweld Pipe Fittings are Good machining properties, Good oxidation resistance in intermittent service to 870¡ãC and in continuous service to 925¡ãC, Good resistance to carbide precipitation, Excellent corrosion resistance in a wide range of atmospheric environments.

We are also a supplier and exporter of tees such as ASME A182 Duplex Steel S31803/S32205, which crosses the word with hydrogen sulfide, the leading culprit in causing sulfide corrosion cracking in sour service. We have the widest stock of Duplex ASTM A815 Fittings such as Duplex S31803 Tee, Duplex S32205 Stub End, S32205 Double End Cap, Duplex 2205 Reducer, Duplex Cross, Duplex steel S31803 elbow, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The amount of other elements that may be present in stainless steel is immeasurable compared to carbon steel. The most notable feature of stainless steel is that it is not easy to corrode or rust. Avoiding corrosion is a unique property of steel, as most mild steels are primarily made of iron, which rusts quickly when exposed to conventional oxygen-containing atmospheres.

Alloy 825 elbows are said to be non-magnetic and can work at high temperatures. It is resistant to atmospheric and water corrosion. It is also resistant to stress corrosion cracking and oxidizing environments.

These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

In oxidizing conditions, INCONEL 600 has better corrosion resistance than Alloy 200 and Alloy 201.

Street elbows can also be used in tight spaces where conventional elbows cannot be easily installed. These elbows are available with a 90-degree bend angle, but are also available in 45 and 22.5 degrees. These Alloy 800 fittings are commonly used in sewers, drains, vents, gas pipes and more.

Stainless steel reducer tee is widely used in the construction and overhaul of petrochemical, petroleum, liquefied gas, chemical fertilizer, power plant, nuclear power plant, shipbuilding, papermaking, pharmaceutical, food sanitation, urban construction and other industries.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Super duplex 2507 / UNS S32750 pipe fittings have great resistive properties to chloride stress corrosion cracking and a high thermal conductivity with a low coefficient of thermal expansion. These pipe fittings have a great resistance to inorganic acids used in dilute hydrochloric acid.

UNS N10665 or W.Nr. 2.4617, Hastelloy B2 (also known as “Alloy B2”), is a solid solution reinforced Ni Mori with low additions of carbon, silicon and iron. It can be used to reduce chemical environment and chemical processing industry. However, Hastelloy B2 should not be used in temperatures from 1000¡ãF to 1600¡ãF and should not be used in oxidizing media.

Stainless steel as a family of metals is very corrosion resistant but with the addition of molybdenum into 316, this increases the grades ability to withstand harsh environments. Often referred to as marine grade, 316 pipe bend is suitable for use in environments that are more aggressive than ambient although care should still be taken to clean the metal regularly to prolong its service life.

Inconel 625 Pipe Fittings are strong and are used in high corrosive applications that need stronger pipes. The material is a nickel chromium molybdenum alloy with niobium in the composition for stabilization. It can operate from cryogenic temperatures up to 1093 degrees Celsius. So the fittings are preferable for applications that require high strength, corrosion resistance and high temperature resistance. The Alloy 625 Buttweld Fittings are used with ease of welding and this is the most used type of fittings. The Inconel UNS N06625 Pipe Elbow is used to turn the pipe away by an angle, usually 45 degrees or 90 degrees. The ANSI B16.9 ASTM B366 625 Inconel Monel Tee can range from ? inches to 48 inches in nominal bore size and it branches a pipe into two.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

CS Gr A860 WPHY 52 Seamless Butt Weld Fittings have to be heat treated in order to achieve optimum tensile strength properties. The high strength obtained by these seamless or welded Carbon Steel WPHY 52 pipe Fittings could be increased by subjecting the material through processes such as normalizing, quenching, and tempering or stress relieving.

Sanitary elbows are typically made of the stainless steel grade 304 or 316 to provide a sterile and corrosion-free surface.

The manufacturing process of pipe fittings includes forging and forming operations. As well as pressing, hammering, piercing, extrusion, upsetting, rolling, bending, fusion welding and machining. Or a combination of two or more of these operations.

The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase.

HT PIPE is one of the largest and most renowned manufacturing and stockholding company in India, supplying stainless steel 316L tubing as well as stainless steel 316L tube fittings and stainless steel 316L flanges.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.