Nimonic 80A hex scoket head cap screw m2 m10 m12 bolt

Inconel X-750 Nuts are fasteners made from an alloy containing nickel and cobalt as base elements, which contains chromium, with additions of titanium and aluminum. Inconel X-750 fasteners are highly resistant to chemical corrosion and oxidation, with high stress rupture strength and low creep rates at high stresses up to 1500¡ãF (816¡ãC).

Hastelloy C2000 fasteners combine the excellent resistance to oxidizing media of C276 with excellent resistance to non-oxidizing environments, making it a unique alloy for protecting chemical process equipment under a variety of conditions, including fluids contaminated with iron ions . It is designed to provide greater versatility than other Hastelloy alloys. This is achieved by increasing the content of chromium and molybdenum and adding a small but effective amount of copper (1.6%). The addition of copper increases the temperature capability of C2000 fasteners in sulfuric, hydrofluoric, and dilute hydrochloric acids.

Inconel 625 Bolts are used mostly in cyclic cooling and heating applications. They are useful in electric resistance welding applications. The bolts are used in housing of engines, honeycomb structures and in hydraulic lines

It has high strength and excellent corrosion resistance in various acidic and alkaline environments, especially suitable for reducing conditions. It also has good ductility and thermal conductivity.

INCONEL alloy C-276 (UNS N10276/W.Nr. 2.4819) is known for its corrosion resistance in a wide range of aggressive media.

Monel K500 nuts are a result of an age hardening process where aluminum and titanium are added to the nickel-copper base and then precipitated throughout the matrix.

It is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment and the recovery of ¡°sour¡± natural gas.

Inconel 718 is a high strength, corrosion resistant nickel-chromium material for use from -423¡ã to 1300¡ãF. It can be easily manufactured and used, from gas engine turbines to cryogenic tanks.

Inconel Alloy 718 is an alloy containing high amounts of nickel, chromium and molybdenum. It is one of the most popular nickel-based superalloys and is widely used for its excellent resistance to corrosive environments such as crevice and pitting corrosion.

Incoloy alloys belong to the Inconel family. This means that the alloy can be used at high temperatures. At high temperatures, a problem associated with certain grades of stainless steel is oxidation. The chemical composition of Incoloy 800 fasteners allows them to be used at high temperatures. The higher the carbon content, the more chance they have to withstand high temperatures. Therefore, manufacturers produce derivative alloys of UNS N08800 bolts, called Alloy 800H and Alloy 800HT, which have slightly different chemical compositions.

718 bolts also has strong resistance to hydrogen embrittlement and stress corrosion cracking. Bolts of Inconel 718 are used for landing nipples, polished hole sockets in sour gas service, and side pockets or hangers. In addition, it is used in high-strength machines or tools in marine applications.

Inconel 601 Flat Washers are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. The high alloy content of Inconel 601 Punch Washers enables them to withstand a wide range of severe corrosive environments. Inconel 601 machined washers are commonly used in industrial applications that require very strong components, including power and utility equipment, petrochemical, and oil and gas processing machinery. Inconel 601 round washers are used in high temperature applications to compensate for loosening of threaded connections or to maintain sealing effects, such as pipe connections in chemical or steel mills, heat exchangers, boilers, rolling mills, etc.

Alloy C276 is a Ni-Cr-Mo alloy containing W and very low carbon and Si content.

It is virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.

Inconel 625 is a nickel-chromium-molybdenum alloy with added niobium that works with molybdenum to strengthen the alloy’s matrix for excellent strength and toughness.

Monel 400 es una de las pocas aleaciones que conserva la resistencia a temperaturas bajo cero, asi que utilicela en estas situaciones.

A nut is a fastener that runs through its inner radius. Nuts are used in combination with bolts to hold a virtually unlimited number of parts, objects and accessories for many types of applications. When Monel 400 alloy is used as a material for making nuts, benefits can be seen in the short and long term. Monel Nickel Copper 400 Nuts provide strength and corrosion resistance in both acidic and alkaline environments. Monel NiCu 400 nuts are also known for their favorable dimensional accuracy and non-corrosion in salt water and hydrofluoric acid.

Hastelloy C276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and seawater and saline solution. In fact, these Hastelloy c276 fasteners can be used in oxidizing atmospheres up to 1900¡ãF. Additionally, Hastelloy c276 hex bolts tend to perform extremely well in high pressure environments. For example, ASTM B574 bolts perform well at pressures around 5400 kPa during acid leaching.

Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly. By definition “A Bolt is a headed and externally threaded mechanical device designed for insertion through holes in assembled parts to mate with a nut and is normally intended to be tightened or released by turning that nut.” When used with a preformed internally threaded (tapped) hole, the hex bolt’s head is turned to tighten, which technically makes it a screw (see our Tech Data section for a discussion regarding the differences between bolts and screws). Hex bolts are also known as: hex head bolts, cap screws, hex cap screws, hex head cap screws, machine bolts, hex machine bolts, hex head machine bolts and, if fully threaded, tap bolts, hex tap bolts and hex head tap bolts. A hex bolt is often differentiated from a hex cap screw by its underhead bearing surface: if it has a circular boss, called a washer face, it’s a hex cap screw¡ªif it doesn’t then it’s a hex bolt.

Monel nickel copper k500 hex bolts are often used for standard and advanced applications where a combination of strength and corrosion resistance is a necessity. Monel UNS N05500¡¯s advanced quality corrosion resistance and usability in extreme conditions makes it the perfect choice for a wide range of industrial applications. Some of which, include:

Chemical processing equipment
Marine applications
Petroleum tills & gasoline tanks
Heat exchangers
Valves & pumps
Propeller shafts
Process vessels
And more

Similar to Nimonic 75 alloy with good corrosion and oxidation resistance. Creep rupture and tensile properties are high at 815¡ãC (1500¡ãF). It can be hot worked in the temperature range of 1050-1200¡ãC.

Nickel alloy 718 hex bolts and other fasteners are available in lengths from 3mm to 200mm. Hex bolts are used for easy reinforcement because the hex head can handle high torque values when tightening.

Therefore, they can be used in chemical acid production plants and food production plants. There are different types such as ASTM F2281 UNS N02200 Ni 200 screws, hex bolts, socket head cap screws, hex nuts, washers, screws, studs and U-bolts. Fastener specification is ASTM B160. 2.4066 Nickel 200 Stud Bolts are composed of up to 99% Nickel, Copper, Iron, Manganese, Carbon, Silicon and Sulfur. ASTM F2281 nickel alloy bolts are expensive, but they are useful in sensitive applications that are susceptible to corrosion. The cost of fasteners is not as important as some chemical processing and food production applications. Nickel 200 UNS N02200 Hex Nuts are one of the most commonly used fasteners due to head geometry and high torque capability.

INCOLOY 800/800H/800HT is a family of high nickel superalloys commonly used in the petrochemical processing industry. INCOLOY 800HT is similar to INCOLOY 800/800H, but with improved creep rupture strength. All of these alloys have high corrosion resistance. At higher temperatures, Incoloy 800 fasteners provide resistance to vulcanization, carburization and oxidation, as well as fracture and creep strength. Incoloy 800 bolts are a solid solution austenitic alloy. Appearing in the microstructure of Incoloy 800 are chromium carbide, titanium carbide and titanium nitride. Incoloy 800H Hex Head Bolts are easy to machine using standard methods. Thermoforming of Incoloy 800 is done in the temperature range of 870 to 1200 ¡ãC (1600 to 2200 ¡ãF). Incoloy 800 screws are used in power plants.

Hastelloy C276 material is designed with good mechanical properties. They have a minimum tensile strength of 601Mpa and a minimum yield strength of 204Mpa. This material makes the alloy easy to machine and elongate.

The high nickel content of Inconel 600 (at least 72% nickel) combined with the chromium content provides many benefits to users of Nickel Alloy 600.

Its chromium content makes the alloy resistant to sulfur compounds and various oxidizing environments. The chromium content of this alloy makes it superior to commercially pure nickel under oxidizing conditions. In strong oxidizing solutions such as hot concentrated nitric acid, 600 is less resistant. Alloy 600 is relatively immune to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy is resistant to steam and mixtures of steam, air and carbon dioxide.

Inconel 718 Fasteners. Our staff is skilled at handling non-standard materials and has experience adapting to the specific properties of exotic and difficult-to-machine materials, ensuring that your fasteners will meet your exact application requirements and maintain their corrosion-resistant properties.

Similar to Inconel grades, Incoloy grade alloys have nickel and chromium as the main base elements. The only difference between these two alloy classes is their chemical composition. Inconel alloys contain almost more than 50% nickel, while Incoloy alloys are not only less than 50% nickel, but the alloys also contain iron. Known as a heat-resistant alloy, Inconel 825 has excellent properties. The most interesting properties of Incoloy 825 fasteners are their high creep resistance and high mechanical strength despite prolonged exposure to heat. The importance of these attributes in particular is considered critical across multiple industries.

Monel 400 or also known as Nickel-Copper 400 is a solid solution alloy that is a high strength material that can be used over a wide temperature range. It also has excellent corrosion resistance and has applications in many areas in marine and chemical processing. It is used in applications such as valves, pumps, fresh water tanks and propeller shafts.

Monel bolts, like Monel 400 and K500, are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range.