Round head bolt Incoloy 800 NCF 800 bolts Elongation

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy Alloy 800H/800HT round bar has excellent resistance to carburizing, oxidation and nitriding. They are not prone to embrittlement even after extended operation at temperatures up to 12000F to 16000F.

Nickel alloy 825 seamless pipe is particularly resistant to sulfuric and phosphoric acid. Known as WNR 2.4858 seamless pipe, this nickel steel alloy is used in chemical processing, pollution control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production and pickling equipment.

ASTM B564 Uns N06600 Flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

Alloy 925 is a nickel-based alloy with major additions of iron and chromium, but also molybdenum, copper, titanium, and aluminum. The combination of high strength and corrosion resistance makes it suitable for applications such as valves, hangers, packers and pipes in sour gas environments. It can also be used for fasteners and pump shafts in marine environments.

The combination of nickel and chromium provides protection in both oxidizing and reducing atmospheres. The high nickel content also provides resistance to chloride ion stress corrosion cracking. Resistance to pitting and crevice corrosion is also excellent. The alloy is produced by a vacuum remelting process, but can be supplied using an air melting single-consumer electrode (VAR or ESR) practice if material specifications permit.

They can also resist aqueous corrosion and hence can be used in marine applications.

SB564 UNS N02200 Flange The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

Alloy 718 Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

The alloy is capable of remaining stable and maintaining its austenitic structure. Incoloy 800 is primarily used in applications with temperatures up to 1100¡ã F, where alloys 800H and 800HT are normally used in temperatures above 1100¡ã F where resistance to creep and rupture is required.

INCOLOY alloys belong to the category of super austenitic stainless steels. These alloys use nickel-chromium-iron as the base metal and add additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at high temperatures and good corrosion resistance in a variety of corrosive environments.

Typical applications for the alloy include ethylene pyrolysis, hydrocarbon cracking, cracking furnaces for vinyl chloride, diphenol and acetic acid. The alloy is also used for valves, fittings and other components exposed to corrosive attack from 1100 to 1800 deg F.

UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

The Nickel Alloy 800H is known for its excellent cold forming characteristics.

Alloy 800 plate is resistant to chloride ion stress corrosion cracking. Nickel 800 plate is also used in chemical and petrochemical processing. Nickel 800 plate is available in any length, cut to order or machined to customer requirements.

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

Incoloy 800-800H-800HT bolts are a nickel-iron-chromium alloy with good strength and resistance to oxidation and carburization under high temperature exposure. These nickel-steel alloys are the same, except the 800H alloy has a higher carbon content, and up to 1.20% aluminum and titanium have been added to the 800HT alloy. General corrosion resistance is considered by many to be very good. Alloys 800H and 800HT exhibit excellent creep and stress rupture under solution annealed conditions.

Incoloy 825 round bar has excellent resistance to a variety of environmental and corrosive conditions such as stress corrosion cracking, reducing environments, oxidizing environments, pitting, crevice and intergranular corrosion. These circular die have excellent mechanical properties over a wide temperature range.

Monel bolts, such as Monel 400 and K500, are made of nickel-copper alloys and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. A standout feature of Monel bolts is their excellent resistance to hydrofluoric acid, a particularly difficult acid to handle, at all concentrations up to the boiling point. For hydrofluoric acid applications, Monel bolts are probably the most corrosion resistant of all commonly used specialty alloys.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. The content of molybdenum and nitrogen significantly increases resistance to pitting and crevice in halide media. At the same time, nickel and nitrogen not only ensure the metallographic strength, but also reduce the separation of the intergranular thermal tendency. Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. They are used in a variety of heavy duty applications including chemical storage and processing, aerospace and food processing.

Incoloy 825 weld neck flange Alloy 825 Flanges also offer good mechanical features. The flanges produced by us are said to be sturdy and leakproof. They have a melting point of 1413 degrees C. and a density of 8.47g/cm3.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

ASTM B462 UNS N08020 Slip On Flange The Alloy 20 is an austenitic niobium-stabilized alloy that contains nickel and low carbon. The chemical composition of Alloy 20 Flanges will mainly include nickel, chromium, and iron, along with some additional elements like molybdenum and copper. The Alloy 20 Flanges is known for its excellent corrosion resistance, even in harsh chemical environments. The Alloy 20 Pipe Flanges show great resistance capabilities in surroundings containing citric acids, phosphoric acids, sulfuric acid, and chlorides. The ASTM B462 Uns N08020 material is known for its good mechanical properties, even at elevated temperatures.

These Incoloy 800HT Bolt Elbow are made from high quality raw materials resulting in high quality Incoloy 800HT Bolt Elbow. They also have built-in compliance with applicable standards and laws. Additionally, the necessary standards, regulations and guidelines are followed in the manufacture of these Incoloy 800HT Bolted Elbow, resulting in a high quality product. These Incoloy 800HT Bolt Elbow are also well made.

The major differences between these alloys are their mechanical properties which stem from the restricted compositions of alloys 800H and 800HT and the high-temperature anneals used for these alloys.

Incoloy 800H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep-rupture strength.

Alloy 825 Flanges?also offer good mechanical features.

Incoloy 825 weld neck flange Alloy 825 Flanges also offer good mechanical features. The flanges produced by us are said to be sturdy and leakproof. They have a melting point of 1413 degrees C. and a density of 8.47g/cm3.