semi-finished raw materials of Incoloy 800 tee relatively easy to fabricate

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The bolt is a nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature environments. Inconel 800HT Hex Bolts are an austenitic high strength solid solution Ni-Fe-Cr alloy with controlled levels of C, Al, Ti, Si and Mg with increased (Al + Ti) content. Inconel 800HT Heavy Duty Hex Bolts are used in a variety of applications involving exposure to corrosive environments and high temperatures, such as heat treatment equipment, chemical and petrochemical processing, nuclear power plants and the pulp and paper industry.

They can be used in pressure vessels with a wall temperature of 800 degrees F. They also offer good resistance to stress corrosion cracking.

Inconel 825 Flanges?also resist localized attack and avoid pitting and crevice corrosion.

Incoloy 800HT RTJ Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM B564 UNS N08825?offers good mechanical properties at room temperature as well as at high temperatures.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

The chemical balance allows the alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. 800HT will not become embrittled even after long periods of usage in the 1200-1600 deg F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. 800HT can be welded by the common techniques used on stainless steels.

INCOLOY 800/800H/800HT is a family of high nickel superalloys commonly used in the petrochemical processing industry. INCOLOY 800HT is similar to INCOLOY 800/800H, but with improved creep rupture strength. All of these alloys have high corrosion resistance. At higher temperatures, Incoloy 800 fasteners provide resistance to vulcanization, carburization and oxidation, as well as fracture and creep strength. Incoloy 800 bolts are a solid solution austenitic alloy. Appearing in the microstructure of Incoloy 800 are chromium carbide, titanium carbide and titanium nitride. Incoloy 800H Hex Head Bolts are easy to machine using standard methods. Thermoforming of Incoloy 800 is done in the temperature range of 870 to 1200 ¡ãC (1600 to 2200 ¡ãF). Incoloy 800 screws are used in power plants.

Incoloy 800-800H-800HT Nuts are nickel-iron-chromium alloys with excellent corrosion resistance in high temperature environments. Also known as UNS N08800 Fasteners, UNS N08810 Fasteners and UNS N08811 Fasteners, these assemblies are ideal for hydrocarbon processing, catalyst tubes and convection/cracking tubes in ethylene production for the oil/gas industry.

They are also resistant to sulfuric and phosphoric acid.

The 800H/AT is normally soldered with RA82 (ERNiCr-3) bare wire for applications up to 1450¡ãF. RA330-04 (N08334) bare wire provides closer thermal expansion coefficient matching, as well as higher strength.

The chromium and nickel contents of this alloy provide excellent oxidation resistance at low concentrations of oxidizing and reducing sulfur, good resistance to carburization and sulfidation. The alloy also has reasonable resistance to nitriding in cracked ammonia, but not as much as Inconel 600.

Monel bolts, such as Monel 400 and K500, are made of nickel-copper alloys and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. A standout feature of Monel bolts is their excellent resistance to hydrofluoric acid, a particularly difficult acid to handle, at all concentrations up to the boiling point. For hydrofluoric acid applications, Monel bolts are probably the most corrosion resistant of all commonly used specialty alloys.

NAS 800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures

Typical applications for alloy 800 and 800H are – Heat exchangers and process piping; carburizing fixtures and retorts; furnace components; electric range heating-element sheathing; extruded tubing for ethylene and steam methane reforming furnaces; ammonia effluent coolers.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Alloy 200 UNS N02200 Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

200 Nickel Alloy Blind Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

They are used for high temperature service, where resistance to oxidation and carburisation are required. For optimum stress rupture properties, or for pressure vessel service above 815¡ãC, Incoloy 800H or Incoloy 800HT should be used.

Nickel alloys are double certified (800H/HT) and also include two forms of properties. Incoloy 800H/HT alloy is designed for high temperature structural applications. The nickel content can make the alloy highly resistant to chloride stress corrosion cracking and embrittlement by sigma phase precipitation. Ordinary corrosion resistance is very useful. Alloys 800H and 800HT have excellent creep and stress rupture properties in the solution annealed condition.

Nickel 201 Slip on flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

La tuberia Incoloy 800 es una de esas tuberias de alta resistencia que tambien es resistente a la oxidacion y la carburacion. Por lo tanto, estas tuberias se utilizan en aplicaciones donde se requiere resistencia a la corrosion y la carburacion.

Alloy 800H rods are designed to have a uniform cross-sectional area and can be produced in square, round or rectangular sizes. Versatile ASTM B408 UNS N08800 rods are rigorously tested to detect and eliminate any defects in these robust assemblies.

Alloy 925 is a nickel-based alloy with major additions of iron and chromium, but also molybdenum, copper, titanium, and aluminum. The combination of high strength and corrosion resistance makes it suitable for applications such as valves, hangers, packers and pipes in sour gas environments. It can also be used for fasteners and pump shafts in marine environments.

The combination of nickel and chromium provides protection in both oxidizing and reducing atmospheres. The high nickel content also provides resistance to chloride ion stress corrosion cracking. Resistance to pitting and crevice corrosion is also excellent. The alloy is produced by a vacuum remelting process, but can be supplied using an air melting single-consumer electrode (VAR or ESR) practice if material specifications permit.

Inconel 800 forms a thick yet stable oxide layer. This thick layer is known to protect the outer surface of the Inconel 800 component from further attack.

Inconel 825 is a nickel alloy that can be used in businesses that handle high thermal reactions. For example, Inconel 825 round bars are commonly used in industries such as air pollution control, chemical and petrochemical, steel pickling, ore processing, petroleum refining, offshore oil and gas production, food processing, and waste disposal.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Incoloy Alloy 800 is widely used in equipment that must have high strength and resistance to oxidation, carburisation and other harmful effects of high temperature exposure.

Alloy 800 Coils are also used in extruded tubing for ethylene and steam methane reformers. The higher creep rupture strength of the Nickel 800 sheet is a result of the aluminum, carbon and titanium content.