ASTM ASME SB 408 Alloy 800HT Incoloy 800 HT UNS N08811 metal bar Nickel alloy bar

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Similar to Inconel grades, Incoloy grade alloys have nickel and chromium as the main base elements. The only difference between these two alloy classes is their chemical composition. Inconel alloys contain almost more than 50% nickel, while Incoloy alloys are not only less than 50% nickel, but the alloys also contain iron. Known as a heat-resistant alloy, Inconel 825 has excellent properties. The most interesting properties of Incoloy 825 fasteners are their high creep resistance and high mechanical strength despite prolonged exposure to heat. The importance of these attributes in particular is considered critical across multiple industries.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800HT RTJ Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy Alloy 800 is widely used in equipment that must have high strength and resistance to oxidation, carburization and other harmful effects of high temperature exposure. For services requiring optimum creep and rupture properties, use Incoloy 800H or 800 HT. The high content of nickel and chromium in the alloy also provides good corrosion resistance.

ASTM B564 UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld. They are resistant to chloride pitting and sensitization. Moreover, Alloy 825 Flanges also offer good mechanical features.

ASTM B564 Inconel 718 Threaded Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Applications for ASME SB408 Alloy 825 round bar are chemically machined components, pollution control, vapor recovery, pickling tank components, and nuclear fuel processing. ASME SB408 Alloy 825 bar has excellent resistance to a variety of corrosive environments including oxidation and reduction.

Incoloy 825 is a nickel iron chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy¡¯s chemical composition is designed to provide exceptional resistance to many corrosive environments

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers. Our products are developed through market research and are sustainable in changing market trends. Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Incoloy Alloy 800 / 800H / 800HT Fasteners (Nuts and Bolts) series for extreme corrosion resistance even in sour environments. Due to the high nickel and chromium content, Incoloy 800 hex head bolts resist oxidation and carburization at high temperatures. The chemical balance allows Incoloy 800H square nuts to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres.

Incoloy 800HT hot-rolled sheet is generally a nickel alloy sheet with a thickness of 3mm-5mm or more. Incoloy 800HT sheet inherits the superior corrosion resistance, high temperature resistance and fatigue resistance of Incoloy 800HT.

Alloy 926 (1.4529) screws are the perfect replacement for 316L when higher corrosion resistance is required without increased strength. Alloy 926 fasteners are considered a 6-molybdenum alloy (6-molybdenum or 6% molybdenum), similar to sister alloys AL6XN and SMO 254. In the stainless steel category, these 6 molybdenum alloys are considered very corrosion resistant.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

They are used for high temperature service, where resistance to oxidation and carburisation are required. For optimum stress rupture properties, or for pressure vessel service above 815¡ãC, Incoloy 800H or Incoloy 800HT should be used.

825 Nickel Alloy Sheet is used in industries such as air pollution control, chemical and petrochemical, food processing, nuclear energy, corrosion resistant applications in offshore oil and gas production, ore processing, petroleum refining, steel pickling and waste disposal.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

INCOLOY alloy 800 (UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500¡ãF (816¡ãC).

ASTM B462 UNS N08020 Slip On Flange Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

The Incoloy 800h Pipe produced in accordance with the ASTM B407 specification is supplied either in the form of cold worked or hot finished manner. Aside from conforming to the chemistry requirements of the said specification the Sb 407 UNS N08810 Incoloy Alloy 800h Round Pipe, is to be heat treated at determined annealing temperatures. Another requirement that needs to be adhered to is the Sb 407 N08810 Grade 1.4958 Pipe needs to be tested and measured via the Planimetric method.

Incoloy 800 Welded Butt Welded Fittings also contain 1.50% manganese, 1% silicon and up to 0.75% copper. Incoloy Alloy 800HT 180 degree bend has excellent corrosion resistance to stress corrosion cracking. Typically, these Incoloy UNS N08800 seamless pipe fittings are heated in the temperature range of 648 degrees Celsius to 760 degrees Celsius.

It has high creep-rupture strength. The following datasheet gives an overview of Incoloy 800HT.

The principle di?erence between alloys 800H and 800HT is the restricted aluminum and titanium content in 800HT, which results in higher creep and stress rupture properties.

Alloy 800 Coils are also used in extruded tubing for ethylene and steam methane reformers. The higher creep rupture strength of the Nickel 800 sheet is a result of the aluminum, carbon and titanium content.

Alloys 800H and 800HT are iron-nickel-chromium solid solution strengthened alloys with a nominal chemical composition of 42% iron, 34% nickel, and 22% chromium.

N08825 Slip-On Flange N08825 Slip-On Flange are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld. They are resistant to chloride pitting and sensitization. Moreover, Alloy 825 Flanges also offer good mechanical features.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. The content of molybdenum and nitrogen significantly increases resistance to pitting and crevice in halide media. At the same time, nickel and nitrogen not only ensure the metallographic strength, but also reduce the separation of the intergranular thermal tendency. Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. They are used in a variety of heavy duty applications including chemical storage and processing, aerospace and food processing.

Alloy 825 rods are good electrical conductors and can also be used for many electrical purposes. These nickel 825 rods resist intergranular corrosion in the as-welded condition. Nickel 825 Round Rods have a high level of resistance to a variety of oxidizing species including nitric acid, nitrates and oxidizing salts. We also offer our customers a variety of custom sizes and shapes.