1-8 in 6mm 8mm 10mm 12mm stainless steel 304 pipe fitting cap

ASTM A403 WP317 Pipe Fittings could be a altered adaptation of Stainless Steel 317L Pipe Fittings. It has high quality and erosion resistance.

ASTM A403 WP316 fittings are available in different sizes and shapes in pressure ratings 3000#, 6000# and 9000#. Stub end fittings are often used to close one end of a pipe.

These pipe fittings include Tee, Concentric reducer, eccentric Reducer, 5D/6D bend, elbow, unions, plugs, cross tee, pipe cap and nipple, ect for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

Stainless steel tees, carbon steel tees and special grade tees are widely supplied by us to many industries such as power generation, petrochemical, shipbuilding, paper manufacturing, chemical, pharmaceutical, and fabrication.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

Stainless steel grade 316Ti is a titanium stabilized version of alloy 316. This austenitic chromium-nickel stainless steel grade contains substantial addition of molybdenum which is why the Stainless Steel 316Ti Pipe Fittings exhibits several important characteristics. For instance, grade 316Ti show an increase in the corrosion resistance properties along with improved resistance to pitting chloride ion solutions as well as increased tensile strength at elevated temperatures.

The ends may be machined for butt welding, threaded, or socketed. When the ends differ in size, it is known as a reducing elbow. Another key characteristic of sanitary elbow fittings is in the name ¡ª they¡¯re sanitary.

316 pipe fittings are commonly used in commercial and industrial piping systems in chemical plants, pulp & paper, petroleum, food & beverage, sanitary, steam systems, and general industrial processes that are subject to various stressors.

This is a nickel-copper, solid-solution alloy that is hardenable only by cold working. It has high strength and toughness over a wide temperature range and is resistant to many corrosive environments.

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

Grade 316 pipe bend also has given excellent service in potable water. Pitting and crevice corrosion may occur in waters with higher chloride content, and 2000 ppm is accepted as the upper limit. The higher molybdenum content of 316 make it significantly more corrosion resistant than grade 304.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

HastelloyC-276 (Hastelloy) is a tungsten-nickel-chromium-molybdenum alloy with extremely low silicon-carbon content and is considered to be an all-around corrosion-resistant aluminum alloy. The key moisture-resistant chlorine, various air-oxidizing fluorides, isopropyl titanate solutions, hydrochloric acid and air-oxidizing salts, have good corrosion resistance in ultra-low temperature and standing temperature sulfuric acid. Therefore, in the past 30 years, it has been widely used in extremely corrosive natural environments such as chemical plants, petrochemicals, flue gas desulfurization, pulp and paper industry, and environmental protection.

Corrosion resistance

The aluminum alloy has the following characteristics: 1. It has good corrosion resistance to most corrosive substances under the two conditions of air oxidation and repair. ¢ÚIt has good resistance to pitting corrosion, void corrosion and intergranular corrosion. The higher content of Mo and Cr makes the aluminum alloy resistant to corrosion by chloride ion content, and the W element further improves the corrosion resistance. At the same time, Hastelloy C-276 aluminum alloy is one of the only types of raw materials that are resistant to wet chlorine, hypochlorite and chlorine dioxide saturated solutions. Ester solution has obvious corrosion resistance. It is one of the very few raw materials that can be used as a hot sulfuric acid saturated solution.

ASTM A403 WP304H has a high carbon content in chemical compositions.ASTM A403 WP304H normally is used for the pressure piping systems of moderate and high temperature services. WP304H is a kind of heat and corrosion resistant steel.It has a good pipe bending,welding performance,heat and corrosion resistance,high rupture strength and stability,also the cold deformation ability is very good.It could be used up to 650¡ãC,oxidation temperature up to 850¡ãC.

These Buttweld 90 Degree Weld Elbows are manufactured to very high tolerances via hydroforming. Hydroforming results in a more uniform fitting that is easier to weld and polish. This manufacturing method allows us to supply a superior quality fitting regardless of the application. Suitable for use in applications ranging from food and beverage, dairy, and pharmaceutical to marine and automotive.

As with most piping considerations, understanding the ideal uses for bent pipe in your design or project is essential to the proper operation of the finished system.

Alloy C22 is a nickel-chromium-molybdenum solid solution strengthened super-alloy with a nominal chemical composition of 56% nickel, 22% chromium, and 13% molybdenum, with additions of iron, tungsten, and cobalt.

HASTELLOY X pipe bend is a wrought nickel base alloy with excellent high temperature strength and oxidation resistance. All of the product forms are excellent in terms of forming and welding.

ASME B16.9 Duplex Stainless Steel Seamless Fittings range from sch5 to sch160 and XXS. Welded fittings with wall thicknesses up to 50 mm. Because the duplex material is strong and resistant to acid and chloride ion corrosion, fittings such as ASTM A815 UNS S32205 Long Radius Elbow are used in seawater, marine and highly corrosive applications such as the oil, oil and gas and offshore oil drilling industries.

High levels of chloride prevent corrosion and can operate at temperatures up to 300 degrees Celsius. Duplex stainless steels have better ductility at low temperatures compared to ferritic grades.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

They are generally used to attach (or join) two or more pipes (or tubes) together using pipe fittings. They help to make the joint stronger by adding additional strength to the joint, thereby helping to maintain the position of joint with increased stability. Pipe Fittings helps to change the direction of pipe/tube and ensures smooth flow of the content within. Pipe Fittings are also known as Buttweld Fittings.

Our Carbon Steel Butt Welded Pipe Elbow is a carbon steel pipe solution made of forged carbon steel and is mainly used in the high temperature service range.

Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments.

It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications.

ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids. The high temperature and pressure tolerance of this material makes the A403 WP316 Elbow to perform better under the corrosive high pressure curvatures of piping. The corrosion in fluid direction changing joints is high. Due to the impact of the fluid flow, the fitting might break if there was corrosion and or thermal expansion.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Cuni 70/30 elbows have superior strength to withstand higher speeds in seawater.

Stainless steel pipe fittings consist of 10% nickel and high chromium content. Manufacturers of stainless steel fittings produce these fittings with the addition of manganese, phosphorus, carbon, silicon and sulfur in addition to the two main elements.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.