2 inch sch40 304 316 904l stainless steel butt weld elbow pipe fittings

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Stainless Steel 310S Butt Weld Fitting (UNS S31008) is a low carbon version of Stainless Steel 310 Butt Weld Fitting. We also offer these butt welded pipe fittings in custom forms based on size and shape. The high chromium and nickel content of stainless steel 310S stud end fittings maintains a greater percentage of room temperature strength than common austenitic alloys such as SS 304.

Stainless steel grade 304 is the most commonly used stainless steel. Stainless steel grade 304N has better corrosion resistance than grade 302, and is mostly non-magnetic in nature; however when cold worked it acquires a slightly magnetic quality.

We are having a team of dynamic and experienced professionals who are observing and supervising the whole process to avoid defects. SS 316/ SS 316L Compression Tube Fittings are suitable to use in chemical, food, beer, decorate, and fluid applications industries. Due to the additional Molybdenum, SS 316 Compression Fittings has better corrosion resistant properties and higher strength than grade 304. We supply best-in-class products, meeting and exceeding our client¡¯s expectations.

Stainless Steel 316 is the standard molybdenum-bearing grade, second in importance to SS 304 amongst the austenitic stainless steels.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

All stainless steel fabrication can only be done using tools designed for stainless steel materials. Tools and work surfaces must be thoroughly cleaned before use. These precautions are necessary to avoid cross-contamination of stainless steel with easily corroded metals that may discolor the surface of processed products.

HASTELLOY X pipe bend is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres.

C-22 is used in severely corrosive media with high chloride and temperature applications such as buffer solutions, active pharmaceutical ingredients (API), fabric softeners, cleaning supplies, and fish, soy and chili sauce.

Duplex Steel S31803 Front Ferrule Fittings are used in commercial and aerospace applications and can be freely formed and have best-in-class weldability. Given that the dual-phase steel S32205 rear ferrule joint is only about one-third the weight of comparable steel parts, it is the clear choice when weight is an aspect.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

SS 316L, the low carbon version of SS 316 and is immune from sensitisation (grain boundary carbide precipitation).

These elbows can effectively change the flow through 60 degree turns.

Inconel alloy butt welded joints are used in all steel industries due to their high quality raw materials and design. Not sure, but mostly the steel and metals industries buy products so that butt welding can take the pressure. It is mainly used in the petrochemical industry because butt welding performs well in terms of processing temperatures, but also the automotive and refining industries are major users.

HT PIPE lends over 20 years of industry knowledge to its unique selection of 316 stainless steel pipe fittings.

Hastelloy B2 pipe bend is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics.

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM B619, B622, B626 UNS N10276, plate, sheet or strip of ASTM B575 UNS N10276, forging or bar of ASTM B564, B462, B472, B574 Gr. N10276. The Hastelloy C-276 fittings are mainly furnished in 3 connection types: butt welding, threaded, socket welding, covering a variety of standard specifications.

Monel 400 is corrosion resistant to most salts, water, alkalis, organic substances, food products, and atmospheric conditions at both normal and elevated temperatures.

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

253 MA Pipe Fittings are austenitic stainless steel nickel-chromium alloyed fitting adding with unusual earth metals and nitrogen. The fittings have superior oxidation resistance up to 1150 degree C and general corrosion resistance. It offers outstanding creep strength along with superior resistance to erosion and sulfidation at elevated temperature. Through the tight control of micro-alloy addition these demonstrate superior heat resistance properties. The fittings have superior ductility and maintain its good formability. The presence of nitrogen and chromium content possess resistance to pitting and stress corrosion cracking.

ASTM A234 is standard of the pipe fitting material. However, this is indicating the properties of the material of various kinds of alloy steel and carbon steel. WPB is a steel grade in which W stands for weldable, B is grading B and P stands for pressure. Thus it is referring minimum yield strength.

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

UNS S31803 fittings are composed of duplex stainless steel with equal amounts of austenitic and ferritic microstructures. UNS S31803 fittings are two-phase, ferritic, austenitic, 22% chromium, 3% molybdenum, 5 to 6% nickel alloy stainless steel.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A403 WP317L is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes.

Incoloy 800 is an alloy of Nickel, Iron, and Chromium alloy with high strength and excellent resistance to oxidation and carburization in high-temperature exposure. Incoloy 800H and 800 HT are also Nickel, Iron, and Chromium alloy which is used for high-temperature structural application. Incoloy 800HT has further modifications to the combined titanium and aluminium levels which ensures excellent high-temperature properties.