135 degree connecting piece elbow joint pipes stainless steel pipe fittings

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel K500 pipe bend and elbow are virtually nonmagnetic, even at quite low temperatures

A stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.
A Stainless Steel Butt Weld Cap is used to seal the end of a pipe or a particular butt weld fitting branch or orifice. Typically butt weld pipe caps are used at the end of a piping system or if maintenance is required the pipe cap can blind or isolate the rest of the system to keep it running while maintenance or repairs are performed.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with good mechanical properties from sub-zero temperatures up to about 550 ¡ãC (1020 ¡ãF) and is approved for pressure vessels with wall temperatures from -10 to 425 ¡ãC (14 to 800 ¡ãF) according to VdTUV-Wbl. 263 and up to 900 ¡ãF (480 ¡ãC) according to ASME Boiler and Pressure Vessel Code.

This is called as the “center to face” distance and is equivalent to the radius through which the ASTM A234 gr WPB elbow is bent.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

It can be easily formed. Our duplex steel fittings are austenitic-ferritic stainless steels for corrosive environments that resist localized corrosion such as pitting, crevice corrosion and stress corrosion cracking.

SS 304 Fitting a kind of common stainless steel,it is generally utilized to create for the make of equipment and parts which needs great comprehensive erosion resistance, execution and formability.

Stainless steel as a family of metals is very corrosion resistant but with the addition of molybdenum into 316, this increases the grades ability to withstand harsh environments. Often referred to as marine grade, 316 pipe bend is suitable for use in environments that are more aggressive than ambient although care should still be taken to clean the metal regularly to prolong its service life.

Stainless Steel 316 has excellent forming and welding characteristics.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

304L Pipe End Caps are used as a protective device designed to protect pipe ends of various shapes. The main purpose of using pipe end caps is to waterproof connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes. They are used in plumbing equipment for domestic, commercial and industrial water supply lines, machinery and process equipment.

In addition to our extensive inventory, HT PIPE stocks a wide variety of thermoplastic, sanitary, plastic lined and nickel alloy pipes, fittings and flanges. We have a full team of industrial sales experts who can answer any of your questions and find the material you need.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

ASME B16.9, ASME B16.28. These Stainless steel 304/ 304L tube/pipe fittings have special quality finishing and duress for long life, high pressure and zero defects.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

Chrome-Molybdenum ASTM A234 WPB Reducer Elbow for the petrochemical, nuclear, gas and oil industries, Norsok Ed4, BP, Saudi Aramco, SABIC, and Shell approved, producing ASTM A234 WPB alloy steel butt welding pipe fittings.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction.

The mixture of austenitic chromium-nickel-iron with a small amount of molybdenum makes Alloy 20 known as a “superalloy,” which provides resistance to acid attack under a variety of conditions. We are a manufacturer of ANSI B16.9 Alloy UNS N08020 Equal Tee with good machinability.

Incoloy 800 is an alloy with a higher content of iron. Due to the alloy having a higher content of ferrous, and lower content of nickel, the cost of Inconel 800 becomes low.

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

Based on SW tee forms, the branch end will be threaded to male or female. So there are male branch tee and female branch tee, which if the tube with male NPT threads, then the tee shall be with female NPT threads.

Stainless Steel 316 is the standard molybdenum-bearing grade, second in importance to SS 304 amongst the austenitic stainless steels.

When titanium is mixed with other metals, the alloys can reach a tensile strength of more than 1,400 MPa, which makes 200,000 psi.