A182 F53 2507 special flange offers better thermal conductivity and a lower coefficient of thermal expansion

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Offshore marine engineering plants need compenents that meet their rugged demands, components that have mammoth strenght but are light weight.

Some of the typical applications of duplex steel grade 2205 are oil and gas exploration, processing equipment, transport, storage and chemical process, high chloride and marine environments, paper machines, liquor tanks, pulp, and paper digesters.

An austenitic-ferritic stainless variant with a higher stress corrosion cracking resistance in comparison to regular austenitic 304 and 316 stainless, but with a lower toughness and impact strength.

S31803 has been supplemented by S32205 (F60) which has a higher minimum Ni Cr and Mo.

Duplex stainless is a mixed microstructure of austenitic and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades with similar corrosion resistance qualities.

ASTM A182 F53 Flange is a high strength flange that has 550MPa minimum yield strength and 800MPa minimum tensile strength.

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encounutered with 300 series stainless steels.

As well as greater tensile and yield strength whilst still providing good ductility and resistance to stress corrosion cracking.

The duplex structure results in improved stress-corrosion cracking resistance, compared with the austenitic stainless steels, and improved toughness and ductility, compared with the ferritic stainless steels.

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .

Super Duplex Pipe Suppliersis known to have better pressure erosion, splitting obstruction and mechanical properties than some other kind of steel.

Duplex Steel Pipe is a metal alloy pipes that is made out of steel with different alloying elements. The name comes from the dual nature of the material.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2507 Duplex Plate also exhibit better ductility and toughness compared to ferritic stainless steels, but they do not provide these properties as successfully as austenitic stainless steels.

Duplex steel UNS S31803 round bar is widely used for ferritic and austenitic duplex stainless steel bars.

It reaches the phase balance of austenite and ferrite in roughly same volume fraction.

Super Duplex UNS S32750 is the most common super duplex grade in the market. UNS S32750 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments.

Supplied in the annealed condition, it has a yield strength of 80ksi (550Mpa), which is higher than most austenitic and duplex grades.

Duplex 2205 bolts have a ductile to brittle transition at -50¡ãC and also become brittle at 300-1000¡ãC, so a temperature of -50¡ãC to 300¡ãC is recommended. Exposure to above 300¡ãC will not only cause embrittlement of 2205 bolts, but will also reduce corrosion resistance.

The A182 Gr. F51 / S31803 material is a typical duplex stainless steel, which contains approximately 50% ferrite and 50% austenite.

Super Duplex S32760 Bar proves to be an excellent replacement for austenitic grades in marine environments. Super Duplex S32760 round bar (ASTM A276/ ASTM A479) exhibits good heat resistance up to 300¡ã.

S32750 Welded Pipes are used in offshore platforms, Mechanical and structural components, sea-water piping, Desalination Plants, Heat exchangers and chemical processing industries.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2507 Super Duplex Stainless Steel was designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

The duplex structure provides 2507 with exceptional resistance to pitting and chloride stress corrosion cracking.

ASTM A182 F53 flanges refer to flanges made from super duplex stainless steel 2507 (UNS S32750) by a hot forging process.

ASTM A789 A789M Covers Grades of nominal wall thickness, stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy.

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

Also known as standard duplex stainless steel, these 2205 duplex bolts are one of the most widely used stainless steel grades.

In the annealed condition, S31803 contains approximately 40-50% ferrite. S31803 is often referred to as the workhorse grade and is the most widely used grade in duplex stainless steel pipes. The use of S31803 stainless steel pipe should be limited to temperatures below 600¡ãF.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

Super Duplex Stainless Steel 1.4410 Nuts?is a super duplex stainless steel with 25 percent chromium, 4 percent molybdenum, and 7 percent nickel. High molybdenum, chromium and nitrogen content in?Super Duplex 2507 Hex Nuts?help the material withstand pitting and crevice corrosion.?