ASTM A105 Carbon Steel EN 1092-1 Flanges Traders in China

ASTM A105 is most commonly used for carbon steel material grade which is used to manufacture forge piping components such as flange and forged fittings of small diameter piping. A105 flange has Tempering of 1100 F followed by air cooling. We are biggest Manufacturer of A105 Steel Flanges.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

U-Bolts are easy to machine and can meet the tight tolerances required for thread and fastener configurations. Carbon steel is also an economical metal. Carbon steels are classified by the amount of carbon in the alloy, which affects the properties of the steel. Mild steel with a carbon content of 0.05-0.3% is ductile and ductile. Low tensile strength and hardenable by carbonization. It is the lowest cost of carbon steel alloys.

Since the other materials are less than 1% of the composition, these are called the carbon steels.carbon steel ASTM A105 Flange are made up of carbon steel or mild steel material. The material composition can have carbon, manganese, phosphorus, sulfur and iron in the composition.

This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.

A105 forged fitting is like high tensile strength, rugged construction, and anti-corrosive in nature, flexibility, durability, low maintenance, excellent surface finishes, and good dimensional accuracy.

ASTM A106 is the same as ASME SA-106 and is the standard specification for carbon steel seamless pipe for high temperature service. It covers pipe sizes from NPS 1/8 [DN 6] to NPS 48 [DN 1200] with nominal wall thicknesses given in ASME B36.10M.

Carbon steel nut and bolt grades are divided into three different categories based on the carbon content of mild, medium and high carbon steels. Mild steel hex bolts are the most widely used category of all carbon steel groups. Mild steel threaded bolt alloys typically contain less than 0.25% carbon by weight. Since this type of carbon steel bolt cannot be hardened by heat treatment to promote the formation of martensite, the alloy is cold worked.

STM A105 FLANGES AS PER ANSI B16.5, BS10 TABLE D, TABLE E, DIN STANDARD FLANGES manufacturers

sa350 lf2 flanges forging temperature is 900 ¨C 1200 ¡ãC. In order to avoid heavy scaling soak times should be kept to a minimum. The flanges range in size from ? inches to 48 inches. And the dimensions of the blind flange a350 lf2 flanges vary according to the standards, ASME B16.5, B16.48, BS4504, BS 10, EN-1092 and others.

Since only one type of carbon steel forging is specified in this standard, a105 is considered a type of forging carbon steel grade.

Welding neck flange have two forms (shapes), one with reducing neck as we called reducing weld neck flange; One with a even diameter of typical long neck named as long neck weld flange.

Monel 400 is a popular nickel-copper alloy commonly used in high performance applications. The alloy has high resistance to acidic and alkaline environments, high strength, good ductility and thermal conductivity. Monel 400 is suitable for use in the subzero to 1,000¡ãF (538¡ãC) temperature range and can only be hardened by cold work.

HT PIPE is the undisputed industry leader, offering the most comprehensive line and inventory of carbon steel fasteners, including bolts, nuts, washers, socket head cap screws, and metal threaded screws of all sizes, including all grades. A broad product portfolio covering all aspects and requirements of the industry, providing quality products that you can use with confidence

ASTM A105 steel grade is a typical common material (mild carbon steel) for forged carbon steel flange, it used in a lot of places for ambient and higher-temperature service in pressure systems.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

Our astm a694 f60 round bars are accepted by customers in a variety of industries, from basic industries such as sugar, paper, textile, dairy, engineering, to more complex industries such as oil and gas, petrochemical, chemical and fertilizer, power generation, and nuclear industry.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges.

ASTM A105 is an iron-carbon alloy with carbon content of 0.0218%~2.11%. Also called carbon steel.

a105 blind flange is forged between 1,700¡ãF to and 2,200¡ãF, followed by quenching and tempering.

Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly. By definition “A Bolt is a headed and externally threaded mechanical device designed for insertion through holes in assembled parts to mate with a nut and is normally intended to be tightened or released by turning that nut.” When used with a preformed internally threaded (tapped) hole, the hex bolt’s head is turned to tighten, which technically makes it a screw (see our Tech Data section for a discussion regarding the differences between bolts and screws). Hex bolts are also known as: hex head bolts, cap screws, hex cap screws, hex head cap screws, machine bolts, hex machine bolts, hex head machine bolts and, if fully threaded, tap bolts, hex tap bolts and hex head tap bolts. A hex bolt is often differentiated from a hex cap screw by its underhead bearing surface: if it has a circular boss, called a washer face, it’s a hex cap screw¡ªif it doesn’t then it’s a hex bolt.

The elbow is used to turn the direction of a pipe line regularly by 90 degrees angle.These pipe fittings used in pressure pipelines and pressure vessel fabrication for servic at moderate and increased temperatures. Fittings out of above standards shall be complied with A960/A960M.

Pressure-Temperature Rating of ASTM A350 Gr. LF3 flanges are identical to ASTM A105 flanges.

The A420 Grade WPL6 fitting is used in pipelines in the paper and pulp industries, condensers, sea water, marine engineering, waste water management and pollution control systems.

Flange wn a350 lf2 has moderate strength and impact toughness and is used extensively for the manufacture of flanges and fittings. The a350 lf2 welding neck flange is one of those welded flanges which can perform very well. The forged, threaded or screwed flanges are useful in different opportunities. These are good in handling pressure resistance, strength and durability. These are used in applications like industrial, chemical manufacturing factories and many others.

The forging process also consolidates the material to produce an essentially wrought steel structure. The product is subsequently machined to the exact shape and size of finished flange.

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.