male and female pipe fittings

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

Alloy 400 is virtually immune to chloride stress corrosion cracking in typical environments. Generally, its corrosion resistance is good in reducing environment, but poor in oxidizing environment.

This alloy is not suitable for highly oxidizing acids such as nitric acid and nitrous acid. It is resistant to sulfuric acid up to 80% and hydrochloric acid solutions up to 20%.

The pipe cap is directly welded to the mold at the end of the pipe; the end of the pipe can also be welded with a flange, and then blocked with the flange. If necessary, the flange can be opened to inspect the inside of the pipe. Traditional thick wall gland seat; forged; large diameter by rotation. After maintenance or even wiring is required, use a blind pipe, not later, use a pipe cap. Using a blind plate has the possibility of leakage. After a long time, the screws will rust and die, which is also useless, and the heat pipe is not easy to insulate.

The alloy can be machined at satisfactory speeds with machine tools commonly used in the industry. Generally, cold drawn or cold drawn stress relief materials are recommended for the best machinability and smoothest finish.

This alloy is most commonly used in a range of environments from mildly oxidizing to neutral and moderately reducing conditions. Other areas of application for this material are marine environments and other non-oxidizing chloride solutions.

Our pipe elbows are widely used in many industries, such as power generation, petroleum, natural gas, chemicals, shipbuilding, heating, papermaking, metallurgy and so on.

The heated carbon steel is then machined into the forged steel fittings. carbon steel astm a105 fittings is used for ambient- and higher-temperature service in pressure systems.

The HT PIPE couplings are designed for the repair of damaged pipes. To?install the split repair couplings, it is not necessary to remove a piece?of pipe from the pipe, which considerably reduces the time and?material required during repairs.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

Stainless steel pipe fittings are made of stainless steel, which is an alloy. Stainless steel is highly corrosion resistant and durable. It has low temperature toughness and high temperature resistance. It can be easily manufactured and retrofitted. There are several grades of stainless steel, but the most commonly used grades are 304, 316 and 316L.

Stainless steel tee fittings are tee fittings. It has two 90¡ã angled outlets and one inlet. These fittings may have threads on the ends. These accessories are used in several industries such as oil refining, water treatment and other treatment units. Tee fittings are available in different sizes and shapes, including straight tees, equal tees, reducing tees, Y tees, transverse tees, male and female branch tees, and male and female tees.

Apart from this, they can be easily elongated by 30% and still possess excellent workability.

A Pipe Nipple is a short piece of pipe generally provided with male threads at each end for connecting to other fittings.

The Curie temperature of this alloy lies within the ambient temperature range and is affected by changes in the alloy’s chemical composition. Caution is recommended in applications requiring strong non-magnetic properties.

Stainless Steel 304 Forged Pipe Fittings is a versatile material that can be used in many different applications. When compared with SS 304H Forged Fittings, SS 304 Forged Fittings are better corrosion resistant, more ductile, and lighter, making them excellent choices for industrial applications.

Stainless steel has been in use for more than one hundred years.

SS 316H Forged Tee is a short pipe with a transverse connection at right angles to the pipe. Mostly used to connect multiple pipes to one pipe with two outlets. Usually, they contain an entry. The SS 316 Forged Cross is used to combine or distribute flow by connecting pipes at cross joints and splitting the flow from each pipe.

Nickel is a costly commodity, which is why its use in an alloy elevates its cost.

The alloying element that makes steel ¡®stainless¡¯ is chromium; however it is the addition of nickel that enables stainless steel to become such a versatile alloy.

Stainless steel takes its name from its ability to resist rusting thanks to the interaction between its alloying components and the environment to which they’re exposed. Numerous types of stainless steel serve a variety of purposes and many overlap. All stainless steels are comprised of at least 10% chromium. But not all stainless steels are the same.

INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

A steel nipple fitting is a straight length of pipe with external threads on both ends. It is one of the most popular categories of pipe fittings. It is a connector or coupling with threads on both ends. Fittings are used to connect pipes to water heaters or other pipes.

The Flexseal HT PIPE couplings are characterized by several special features. They can be easily and quickly assembled without losing their sealing performance and reliability against the conventional design. The HT PIPE couplings are available in any size from 300 mm to 2100 mm.

Stainless steel pipe fittings are parts that connect pipes to pipes, their purpose is to connect, control and change direction, divide, seal, support various parts in the piping system, select and prepare suitable pipe fittings to connect together, there are many types, sizes , grades and specifications to meet specific requirements.

SS 316 forged pipe fittings are used to bend flow and connect two pipes to each other at different angles. They must be designed in such a way that they do not cause cavitation and excessive pressure loss.

To recover the inherent corrosion resistance of stainless steel castings. The corrosion resistance of stainless steel decreases after investment casting. The corrosion resistance of stainless steel castings recovered to the optimum state after solution treatment.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

A105 shall adhere to tensile strength, yield strength, elongation, reduction of area, and hardness requirements. Guidelines for retreatment, repair by welding, and product marking are given.