elbow bend pipe fittings

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

ASTM A182 Alloy Steel F22 Fittings are available in a variety of shapes, sizes and dimensions according to the needs or requirements of the application or to customer supplied specifications.

We are the largest shareholder of forged threaded bushings in custom sizes to customer requirements. We specialize in producing threaded bushing sizes to ASME B16.11. Threaded hex bushing sizes to B16.11 cover pressure-temperature ratings, dimensions, markings, tolerances and material requirements.

In the manufacturing industry, the production is done by obviously using the best possible quality of crude materials and alloys. It thus tends to offer various good attributes.

Bushings, also known as sleeve bearings, are just one specific type of bearing. They slide on the rod to provide extremely low friction movement. They are ideal for shock absorption and minimise energy consumption, noise and wear.

A pipe fitting, for pipe or pipe, is a very short piece of pipe or pipe with a socket or female pipe thread on one or both ends that allows two pipes or tubes of the same or different sizes to be joined together.

The use of branch fittings instead of conventional fittings (buttweld tee, reinforcing pads and saddles) has the following advantages (example Weldolet):

Just 2 welds are needed, instead of 3 (less work and weld inspections)
Accelerated installation time
Less space is required, making the piping system design more flexible
The flow is fully unrestricted, due to the funnel design

Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

These ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 pipe fittings are corrosion resistant. ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 fittings also have high dimensional accuracy.

The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness.

Socket Weld Elbow and Threaded Elbow Fitting is a fitting installed between two lengths of pipe or tubing allowing a change of direction, usually 180¡ã, 90¡ã or 45¡ã. Nickel Alloy Elbows are available in short and long radius types.

The heated carbon steel is then machined into the forged steel fittings. carbon steel astm a105 fittings is used for ambient- and higher-temperature service in pressure systems.

ASTM A105 Forged Fittings for various right industrial solutions. The product to the domestic and global patrons is offered at most attractive rates. The product is manufactured in accordance with various raw materials standard qualities. They are enjoying having a good reputation in the market.

A socket weld is a pipe connection detail in which the pipe is inserted into a recessed area of a valve, fitting or flange. It is mainly used for small pipe diameters and is generally used for pipes with a nominal diameter of NPS 2 or less.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

At elevated temperatures, the annealed and solution annealed alloys exhibit good oxidation resistance and high strength.

Strength and toughness indicators are among the best among all steels. Its most prominent advantage is corrosion resistance. Stainless steel must be used in highly corrosive occasions such as chemical papermaking. Of course, the cost is also higher!

Stainless steel has been in use for more than one hundred years.

ASTM A182 Alloy Steel Forged Fittings are manufactured according to the ASTM A182 specification, which covers high pressure and high temperature service flanges covered by ASME B16.11, MSS-SP-79/ 83/ 95/ 97 and BS3799 standards.

Hastelloy C-276 bushings are also used in sour gas wells, pulp and paper production, waste disposal, pharmaceutical and food processing equipment. Other important properties of this alloy Nickel Alloy C-276 and Hastelloy C-276 include its resistance to oxidizing agents.

Forging is one of the oldest methods used to form metal parts, improving their mechanical properties such as fatigue, impact resistance and corrosion.

The working pressure of nickel alloy fittings will vary with the size and construction of the pipe, the type and number of clamps used, the location of the clamps, the correct installation of the clamps, the temperature and the product being conveyed. Fittings are available in the widest range of wall thicknesses and materials in the industry.

They can be welded easily and resist post-weld carburization or graining.

Incoloy 800 is a popular choice in the oil and gas industries because it can withstand sour gas and high chloride environments.

Monel 400 operates in a wide range of acidic and alkaline environments and has excellent ductility and thermal conductivity. Its properties make it ideal for heavy-duty applications and those requiring a high melting point and toughness in the harshest conditions.

During the aging process, Monel K500 butt welded pipe fittings experience a slight permanent reduction, but a slight warpage occurs due to the entanglement of low heat and slow cooling rates.

Flanges, fittings, valves and various other parts ordered to customer dimension or to industry standards such as MSS, ASME and API specification are included in the scope.

A105 shall be subjected to heat treatment (annealing, normalizing, tempering, or quenching). A105 shall conform to carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium contents.

For instance, the use of Carbon Steel ASTM A105 Fittings is prominent in those applications that involved not only environments where the temperatures are high, but also in those applications at room temperature.

At elevated temperatures it offers resistance to oxidation, carburization, and sulfidation along with rupture and creep strength.