nickel-chronmium-iron alloy 600 round rod Inconel 600 UNS N06600 bar Nickel alloy bar

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Inconel 718 or Alloy 718 is the most commonly used hardenable Inconel nickel alloy grade. Due to its precipitation hardening and its main nickel and chromium components, this alloy has a combination of excellent corrosion resistance and high strength even at high temperatures.

Inconel 718 is a nickel-chromium-molybdenum superalloy designed to resist a variety of severe corrosive environments, crevice corrosion and pitting corrosion. This nickel alloy also exhibits extremely high yield, tensile and creep rupture properties at elevated temperatures. Inconel 718 is intended for long-term use from low temperatures to 1200¡ãF.

Annealing softening begins at approximately 1600¡ãF (871¡ãC) and is fairly complete after 10 to 15 minutes of heating at 1800¡ãF (982¡ãC). Above this temperature, grain growth can be objectionable, although very brief heating at 1900¡ãF will result in complete softening without excessive grain growth. Since the cooling rate has no effect on softening, the material can be water quenched or air cooled.

Inconel 718 flanges are also used in jet engines, pump bodies and parts, rocket engines and thrust reversers, nuclear fuel element gaskets, hot extrusion tools, and more.

Inconel X750 ERW Pipes is a Chromium-Nickel alloy made from precipitation hardenable by accompaniments of Ti and Al, having creep – rupture potency at soaring …

The outstanding and versatile corrosion resistance of INCONEL 625 alloy under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field.

Inconel 718 round bar is a nickel-chromium alloy bar with up to 55% nickel in its composition. Contents include 17% chromium, 4.9% niobium, 6.6% iron minimum and aluminum, boron, carbon, cobalt, copper, manganese, phosphorus, lead, sulfur and silicon. The material has an ultimate tensile strength of 1375 MPa and a minimum yield strength of 1100 MPa.

Inconel 600 alloy is specially made to use high-temperature application and it can be bear up to 2000 degree F temperature. The high nickel content increases its specific quality like improve resistance in reducing the environment, resistance to corrosion by many inorganic and organic elements. Because of nickel alloy the Inconel 600 alloy resistance to chloride stress corrosion and also resistance to many acids.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 600 alloy is a nickel chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride containing atmospheres. It is a non magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.

Nickel alloy pipes are composed of alloys with nickel as the main element. It is widely used for its high temperature strength, corrosion resistance, thermal expansion, special magnetic properties.

Alloy 600 is a nickel-chromium-iron alloy used in applications requiring corrosion and heat resistance. This alloy has excellent mechanical properties and exhibits an ideal combination of high strength and good machinability over a wide temperature range.

This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.

Inconel 625 Bars For excellent machinability, these bars are equipped with low cutting speeds, heavy equipment, ample coolant, rigid workpieces and tooling. One thing to keep in mind about these bars is that it does work harden quickly, so intermediate annealing can be used for complex part forming operations.

Due to the solid solution effect of refractory metals, it has excellent toughness and strength in the temperature range from low temperature to 2000¡ãC (1093¡ãC). This Inconel grade can withstand stress cracking up to 1200¡ãC (649¡ãC) and is resistant to oxidation and oxidation up to 2000¡ãC.

HT PIPE manufactures Inconel Alloy 718 fasteners such as nuts, bolts, socket head cap screws, washers, studs, studs, socket head cap screws, countersunk socket head screws and machined parts as well as hot forgings.

HT PIPE is specialized in supplying the very good quality of Inconel 601 flanges that are actually created using premium quality of raw materials.

The nickel content in Inconel 600 sheet helps the alloy maintain its corrosion resistance properties. This corrosion resistance is evident even under reducing conditions, where Alloy 600 plate is resistant to corrosion by a variety of organic and inorganic compounds.

B564 601 Spade Flange Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Inconel Pipes is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, Inconel ERW Pipes is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

INCOLOY alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments

Since Inconel uses nickel as its primary alloying agent, the use of Inconel 718 fasteners at elevated temperatures has no negative effect on the application or the equipment being used.

They can be either cold or hot rolled in different shapes to suit various applications.

Inconel 718 fasteners are ideal for extreme environments where oxidation and corrosion resistant bolts are required, even when subjected to pressure and heat.

Inconel 718 has become useful in a wide range of applications ranging from manufacturing operations to military equipment and the aerospace industry.

The alloy is ductile and readily forms Inconel 601 fasteners. It has high mechanical strength, good toughness and excellent corrosion resistance.

Inconel 718 Alloy Fasteners are available in a variety of styles including Inconel 718 Eye Bolts, Inconel 718 Wing Bolts, Inconel 718 U Bolts, Inconel 718 Flat Head Screws, Inconel 718 Machine Screws, Inconel 718 Hex Screws, Inconel 718 Hex Socket Screws, inconel 718 hex nuts and inconel 718 lock nuts, etc.

Due to the alloy’s good corrosion resistance, Inconel 718 Hex Head Bolts have been used in food processing equipment, caustic solutions, and general corrosion resistant parts and structures.

Owing to its high corrosion resistance– especially pitting and crevice resistance, Inconel 625 is an ideal for high saline, underwater applications.

Alloy 625 rods are commonly used in oil and gas production where hydrogen sulfide and elemental sulfur are present at temperatures in excess of 150 degrees Celsius. These Nickel 625 round bars are very resistant to seawater under flowing and stagnant conditions as well as under fouling conditions.