solid bar ASTM A105 steel bar

ASTM A105 Flange is a specification of flanges.carbon steel ASTM A105 Flange are made up of carbon steel or mild steel material.

HT PIPE provides high quality carbon steel flanges for boiler and pressure vessel manufacturing.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

Our Alloy Steel A234 WP9 Pipe Elbow are available in a number of pipe end connections, like threaded, bevelled, square, grooved, bent, barbed and seamless and in a variety of wall thickness.The salts in Alloy Steel WP9 Pipe Reducer may create when hydrochloric acid interacts with iron and copper.

Our A105 Flange ANSI B16.5 are meant for non-critical conditions, as they have a low Carbon content. We have largest ready stock of Carbon Steel ASTM A105 Flange such as Weld Neck, Slip On, Socket Weld, A105N Orifice, Blind, Spectacle Blind Flanges, Ring Type Joint Flanges (RTJ) , Screwed / Threaded Flanges, and CS A105 Reducing Flanges, etc.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

Our rapid lead times are some of the quickest in the industry so you will never have to worry about hitting your deadlines. A majority of our business originates from the United States and Canada, but we are quickly becoming a global supplier.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Chrome-Molybdenum ASTM A234 WPB Reducer Elbow for the petrochemical, nuclear, gas and oil industries, Norsok Ed4, BP, Saudi Aramco, SABIC, and Shell approved, producing ASTM A234 WPB alloy steel butt welding pipe fittings.

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

ASTM A420 is the standard specification for pipe fittings of carbon steel and alloy steel used for low temperature services. WPL6 is the most used grade material under A420.

A105 carbon steel is a steel with moderate carbon content. This makes it ideal for applications requiring good strength and toughness, such as pressure vessels and piping.

All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams. We offer 100% radiography on all welds as standard.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Weld neck flange(WN flange) attach to the pipe by welding the pipe to the neck of the pipe flange. The allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck flanges.

ASTM A234 Gr. WPB 45 degree elbow, also known as return elbows, functioning to change the direction of flow at a 45 degree angle.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.

These ASTM compliant plates can be considered for applications such as pressure vessels and boilers.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

The buttwelded fitting are stronger and can be used for welding with ease. The Carbon Steel buttweld elbow is a buttweld fitting that is used to turn or change the direction of the pipeline.

A105 forged fitting is like high tensile strength, rugged construction, and anti-corrosive in nature, flexibility, durability, low maintenance, excellent surface finishes, and good dimensional accuracy.

We produce Carbon Steel A105N Blind Flanges are widely demanded across the world for their noteworthy features such as optimum finish, corrosion resistance, dimensional accuracy and durability

U-Bolts are easy to machine and can meet the tight tolerances required for thread and fastener configurations. Carbon steel is also an economical metal. Carbon steels are classified by the amount of carbon in the alloy, which affects the properties of the steel. Mild steel with a carbon content of 0.05-0.3% is ductile and ductile. Low tensile strength and hardenable by carbonization. It is the lowest cost of carbon steel alloys.

The elbow is used to turn the direction of a pipe line regularly by 90 degrees angle.These pipe fittings used in pressure pipelines and pressure vessel fabrication for servic at moderate and increased temperatures. Fittings out of above standards shall be complied with A960/A960M.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A694 is a standard specification covering carbon and alloy steel forgings for pipe flanges, fittings, valves, and other parts for high pressure transmission services. The steel meets chemically analyzed standard chemical composition requirements and meets full casting and tensile strength performance requirements.

ASTM A350 Grade LF2 is a plain carbon steel usually supplied in normalized, normalized and tempered or quenched and tempered condition.

ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges.