2 inch A815 stainless steel butt weld tee pipe fittings

The process to produce cast stainless steel pipe fittings is investment casting in lost wax method. In stainless steel investment casting, a specific and general wax pattern of the preferred pipe fitting is produced and mounted onto a wax tree. The wax tree is interchangeably plunged into a ceramic substance and topped with a stucco material. After this, it is left to dry out, and the process is repeated until a thick shell is achieved.

ASTM A860 WPHY 52 Fittings are made up of a high yield carbon steel with carbon, manganese, sulfur, phosphorus, silicon, nickel, chromium, molybdenum, copper, titanium, vanadium and cobalt in the composition.The increased durability ensures a long work life, therefore proving that the A860 WPHY 52 elbow is a cost saving solution.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

They can operate in a temperature range of 450¡ãC to 850¡ãC. They can also be customized to specific requirements and have passed various tests to confirm maintaining the performance of this SS 316L eccentric reducer.

In seamless fitting form it has size ¡°1/2 to 24¡± and in welded form¡±24 to 96¡± and thickness is available in SCH 10,20,30,40,80,100,120,140,160,XXS. It has dimensions like ANSI/ ASME B16.9, B16.28, MSS-SP-43.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

SS 304 Concentric Reducer also exhibits excellent ductility, spinning, forming and drawing properties.

Depending on the needs of the application, the A234 Wpb Elbow Dimensions vary.

Super Duplex S32950 Fittings are hardened on a variety of parameters such as strength, temperature, pressure resistance and durability before supplied to the customers. These UNS S32950 Super Duplex Pipe Fittings are being offered in an inclusive range such as S32950 Elbow, S32950 Bends, S32950 Equal & Unequal (reducing) Tees, S32950 Equal & Unequal (reducing) Cross, S32950 Concentric & Eccentric Reducer, S32950 End Pipe Cap, S32950 Long & Short Stub-ends, etc.

We manufacture premium duplex 31803/32205 fittings with many key properties such as high resistance to corrosion fatigue, stress corrosion cracking, especially chloride stress corrosion cracking, erosion, excellent workability and weldability.

Hastelloy X is a nickel-based superalloy ideal for gas turbine engine, aircraft, industrial furnace, and chemical processing applications.

ASTM A403 WP304H pipe fittings mean the pipe fittings which material is wrought austenitic stainless and grade is ASTM A403 WP304H.The material is additionally utilized all through the control era industry.

SD reducers are designed for featuring resistance to pitting, corrosion fatigue, erosion-corrosion, SCC, crevice corrosion and also high strength and good welding ability. SD cross combines ductility, high mechanical strength and corrosion resistance at ranges of the atmosphere.

ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.Our wide range of Grade WPHY 52 Pipe Fittings includes: WPHY Gr 52 Bend, Elbow WPHY 52 in 45/90 degree, WPHY Grade 52 Tees, Carbon Steel WPHY 52 U Bend, MSS SP75 WPHY Gr 52 Stubends & ASTM A860 WPHY Grade 52 Pipe Nipple.

RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength.

Typical industrial fields of SUS 316 butt welded pipe fittings are brewing, chemical industry, dairy products, food processing, marine equipment, petrochemical, pharmaceutical, etc. Typical product applications for these ASME SA182 SS 316 fittings are condensers, heat exchangers, filters, pressure vessels, valves, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

2205 has proven to be an excellent alternative to austenitic stainless steels in marine environments. It exhibits good heat resistance up to 300 degrees Celsius. It can be easily soldered by most standard methods, the only mandatory requirement is the use of filler metal. Due to its high strength, workability is low.

Nuclear systems also generally involve high temperatures beyond 650¡ãC, in which the strength of Inconel 625 elbow can withstand.

Hastelloy C-276 is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe, tubing, pipe fittings, flanges, fittings.

For equal tee/straight tee, the center-to-end dimension of branch is same with the run, while for reducing tee, the center-to-end dimension of branch is smaller than the run to obtain the desired flow and pressure through the piping system.

ASTM A403 is the standard of pipe fittings material,it indicates the materials properties of different kinds of stainless steel,WP321 is one of the steel grade in this standard.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We sincerely look forward to providing you with the best quality and most affordable Heat-Resistant Stainless Steel Strips, 321 Stainless Steel Coils, 301 Stainless Steel Coil and bringing the best and fastest economic benefits to your business. Our company is committed to innovation, because we know that only unremitting innovation, the brand can be sustainable development. We may stick on supplying original and good quality parts even a little profit earned. In terms of business innovation, our company shapes the corporate image, implements the brand strategy, establishes the modern corporate culture, and reasonably arranges the network.

Stainless Steel 304 Fitting Elbow is an austenitic chromium alloy with a steel composition of 18% chromium and 8% nickel. Stainless steel 304 pipe fittings have high ductility, excellent forming, spinning and drawing properties.

Incoloy 800 Street Elbow is designed with female threads on one end and male threads on the other end. It allows pipes to connect with other pipes at an angle. The main advantage of this elbow is that it can be connected directly to other fittings without the need for fittings or short connecting pipes.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

304 and 304L are austenitic alloys, which means that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistant properties.