A182 F9 F11 F12 F51 Alloy Flange Plate Flange at a competitive price

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

The alloy steel of ASTM A182 F11 flanges is called chrome-moly flanges. These are flanges that contain chromium and molybdenum, these are the ingredients that make them resistant to corrosion, which also adds to its toughness.

ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy. These ASTM A182 alloy steel F12 flanges also have a rust-proof finish. They are used in numerous industrial applications. These applications include the paper and pulp industry, the oil and gas industry, and more.

ASTM A182 lap flanges are known by a variety of names, including support flanges, loose flanges, loose ring flanges, and van stone flanges.

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

These ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy.

The most common application for A182 F2 round bars is shafts. It has various alloying elements that enhance its mechanical properties.

ASTM A182 Gr F9 flanges are typically designed for applications with high temperature requirements. Alloys used to produce flanges according to this specification include wrought or rolled alloys and several stainless steel grades.

Several ANSI/ ASME standards use materials that are forged or cast to produce Cast AS Blind Flanges.

Low alloy steel ASTM A182 F11 flanges typically have a total alloy content of 1.5% – 5%. Its common alloying elements are manganese, chromium, silicon, nickel, molybdenum and vanadium. It may contain up to four or five different quantities of these alloys. At the same time, the increased strength of the alloy steel F11 flange may require higher forming pressures. Annealing of SA 182 Gr F11 steel flanges is accomplished by water quenching by thorough immersion at 1725¡ãF – 1850¡ãF (941¡ãC – 1010¡ãC) and can only be hardened by cold work.

The achievable mechanical properties depend on added elements such as nickel, chromium, molybdenum and vanadium. The following are a series of improved properties of alloy steel (compared to carbon steel): strength, hardness, toughness, wear resistance, corrosion resistance, hardenability and hot hardness. To achieve some of these improved properties, the metal may require heat treatment.

A335 grade P5c pipe is a low alloy carbon steel (Cr-Mo) self-quenching in air where high hardness and residual stress are required for welding and it is not recommended for direct use in services requiring critical conditions. This situation requires the application of post weld heat treatment (PWHT). If you want to avoid PWHT then you can use preheat (120¡ãC) when soldering A335 grade P5c tubes. PWHT is required if the thickness of ASTM A335/ASME SA335 P5c alloy steel pipe is greater than 13 mm.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P149

The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.

ASTM A193 Grade B7 bolts and studs are made from chrome molybdenum steel and are quenched and tempered (heat treated) to achieve the desired mechanical properties (strength). Grade B7 is the most commonly used A193 bolt grade in construction.

The key to the P5 composition of chromium-molybdenum alloys is the addition of chromium and molybdenum. Chromium or chromium increases high temperature strength, increases oxidation resistance and increases tensile, yield and hardness at room temperature. Molybdenum improves strength, elastic limit, wear resistance, impact quality and hardenability. It increases resistance to softening, inhibits grain growth, and makes chrome steel less susceptible to embrittlement. Molybdenum is also the most effective additive for increasing high temperature creep strength or creep resistance. It also enhances the corrosion resistance of the steel and inhibits pitting corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P107

These supplied alloy steel F2 A182 bars are manufactured synchronously through set industry specifications using high quality raw materials and leading technology. Regarding the domestic and international quality of the raw materials, we also offer these round bars and bars in custom sizes.

ASTM A335 P9 pipe standards and schedules vary based on the needs of the application. A335 P9 chromium pipe composition contains 9% chromium and 1% molybdenum.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de aerated acid.

ASTM A335 P11 seamless pipes are used in the production of transmission components in the automotive industry. Tubing is also used in the oil and gas industry because it is stronger, harder and has good properties at high temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P130

A182-F11 is an American standard pearlitic structure heat-resistant steel forgings, the execution standard: ASTM-A182/A182M-2017.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

When the carbon content of the a333 gr 6 welded pipe chemistry is lower, the chance of cracking in the welded area is also lower. However, some manufacturers prefer seamless pipes over welded pipes. The reason behind this is that the performance of the a333 gr 6 seamless tube is almost 20% higher than the welded one in high pressure environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

We supply these ANSI B16.5 Plate Flanges to the irrigation industry.

AISI 4130 grade is a low alloy steel with elements such as chromium and molybdenum added as strengthening agents in its distribution. AISI 4130 pipe is more receptive to treatment by heat or mechanical means than conventional carbon steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

We can supply chrome molybdenum alloy flanges sorted by alloy grade, size and pressure.

ASTM A335 alloy is the steel pipe defined according to the production bill of materials (or material). As the name implies, the alloy pipe and the seamless steel pipe are defined according to the production process (seamless seamless). The difference between the seamless pipe is the welded pipe, including the straight seam welded pipe and the seamless steel pipe. Spiral tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

In applications where higher working pressures are a prerequisite, the use of seamless pipes is justified. Although stronger than welded pipe, the cost is much higher. In addition, in welded products, there is a greater risk of intergranular corrosion in the heat-affected weld zone. The obvious difference between alloy steel welded pipe and seamless product is the transverse seam along the length of the pipe
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P128

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

ASTM A193 Grade B7 is the standard material specification for chromium-molybdenum alloy steel fasteners for high-strength, high-temperature, and special-purpose applications. Grade B7 is a heat treated chromium molybdenum alloy steel with a minimum tensile requirement of 100 ksi, a yield strength of 75 ksi and a maximum hardness of 35 HRC. The ASTM A193 specification covers requirements for chemical composition, mechanical properties, hardness, heat treatment, and recommended nut washers for Class B7 fasteners. ASTM A193 Grade B7 is the broadest specification for fasteners, commonly found in bolts or pipes, pressure vessels, valves, flanges and fittings.

These are said to be specifications for alloy flanges for high pressure and service. The 3% carbon content of these flanges provides a lot of room for improved weldability, which also increases their overall strength.

Alloy steel sounds like: steel that contains a specific amount of alloying elements. Generally, alloying elements make steel stronger and more resistant to shock or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many other alloying elements are also used in the production of steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42