ASME B16.5 ASTM B564 UNS N04400 Flange Sizes 15 NB to 1200NB Flange

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

ASTM B564 UNS N04400 Pipe Flang Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.

Monel 400 has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The composition is shown in the Table below.

Alloy 400 Pipe Flanges the Monel 400 Flanges shows evidence of excellent temperature. On the other hand, properties such as Strength and hardness of the Monel 400 Lap Joint Flange is only slightly diminished with regards to the other properties like ductility or impact resistance. Besides its the alloy is renowned for its toughness or impact strength properties. And therefore is very appropriately used in applications like chemical and hydro-carbon processing, heat exchangers, valves and pumps.

Monel K500 fasteners are cold worked prior to precipitation hardening. The strength of the fasteners is stable to 1200 degrees Fahrenheit. Here, at this temperature, it becomes more ductile, reaching toughness around 400 degrees Fahrenheit. Higher strength and hardness after precipitation hardening compared to 400. Due to its numerous advantages, Monel K500 ASTM fasteners are used in a wide range of industries.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Monel 400 Seamless Tubing, Monel 400 Tubing, Alloy 400 Gas Tube, Monel 400 boiler tubes & Monel 400 Polish Tube are most often found in chemical plant equipment due to their strong resistance to chemical corrosion.

K-500 is characterized by high corrosion resistance and is an ideal alloy for use in marine environments where constant contact with salt water is required.

The high pressure rating of Monel flanges means they can be used in high pressure environments.

MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

Typical applications for alloy K-500 pipe bend and elbow are pump shafts and impellers; doctor blades and scrapers; oil-well drill collars and instruments; electronic components; springs; and valve trim.

Astm B564 Monel 400 Blind Flanges the Monel 400 Flanges shows evidence of excellent temperature. On the other hand, properties such as Strength and hardness of the Monel 400 Lap Joint Flange is only slightly diminished with regards to the other properties like ductility or impact resistance.

It combines the corrosion resistance of Monel K-500 but gives the added advantage of extra strength and hardness (as a result of its age hardening ability).

Alloy 400 (UNS N04400) is a nickel copper alloy with high strength (comparable to structural steel) and toughness. Alloy 400 also has excellent corrosion resistance in a range of media including seawater, hydrofluoric acid, sulphuric acid and alkalis.

Its toughness lends itself to use in nuclear power plants, mining, cement, and the oil and gas industry.

Monel 400 contains the same levels of nickel and copper as the natural nickel ore found.

ASTM B165 (same as ASME SB-165) is a standard specification covering the nickel-copper alloy Monel 400 (UNS N04400) in cold-worked seamless tube form.

In fact, in comparison to nickel, the corrosion resistance properties of UNS N04400 Orifice Flange tend to be much higher than nickel itself.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM B564 UNS N04400 Pipe Flange Monel 400 has a wonderful corrosion resistance by many reducing media such as sulfuric and hydrochloric acids.

Monel K500 fasteners have trusted properties such as strength, hardness and fracture toughness, which are achieved through the addition of aluminum and titanium as well as nickel and copper alloys. Its basic composition is similar to ALLOY400, but alloys are added to allow age hardening under controlled temperature and time conditions.

Nickel alloys are combinations of nickel and a variety of other metals that make strong, oxidation-resistant products with an average lifespan of 25 to 35 years. Monel 400 is a nickel-copper alloy containing approximately 67% nickel and 23% copper.

As a corrosion resistant alloy, Monel 400 can withstand high temperature steam environments and fast flowing brackish/seawater, while maintaining excellent resistance to stress corrosion cracking in most fresh waters.

Monel K500 pipe bend and elbow have corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis.

Alloy 400 has corrosion resistance, high strength and good weldability. Monel 400 has amazing mechanical properties at sub-zero temperatures. It has a melting point of 2370-2460¡ãF and is easily used at temperatures up to 1000¡ãF.

Monel K500 pipe bend and elbow has excellent mechanical properties from sub-zero temperatures up to about 480C.

A286 (1.4980) bolts, also known as alloy 660 bolts, are a stainless steel alloy containing iron, nickel and chromium. A286 bolts are known for their high strength, creep resistance and oxidation resistance at elevated temperatures, once age hardened. As a result, A286 bolts provide high strength from room temperature to approximately 1300¡ãF (700¡ãC).

There are different standards to cover the different nominal bore sizes of the flanges. The ANSI B16.5 Monel DIN 2.4360 Blind Flange that has diameters ranging from ? inches to 48 inches in this standard.

Hastelloy X is a nickel base alloy that possesses exceptional strength and oxidation resistance up to 2200¡ãF. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. The alloy has excellent forming and welding characteristics.
HASTELLOY? X alloy (UNS N06002 (W86002) is a nickel-chromium-iron-molybdenum
alloy that possesses an exceptional combination of oxidation resistance, fabricability and
high-temperature strength. It has also been found to be exceptionally resistant to stresscorrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600¡ãF (650, 760 and 870¡ãC) for 16,000
hours.

Monel 400 is corrosion resistant to most salts, water, alkalis, organic substances, food products, and atmospheric conditions at both normal and elevated temperatures.

Alloy 400 (UNS N04400) is a nickel-copper alloy with high strength (comparable to structural steel) and toughness.