ASTM A105 4150# SORF 1.4565 X2CrNiMnMoN25-18-6-5 EN 10088 – 2 : 2005

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

There is another type of flange that is known as killed Carbon Steel Forged Flanges. They are destroyed in the melting process.

Carbon steel bolts are one of carbon steel fasteners. There are different types of carbon steel and they all have high hardness. HT PIPE is a leading manufacturer and supplier of carbon steel nuts and bolts and other fasteners.

Carbon Steel A105 Grade all products like flanges, butt weld fittings, forged fittings, outlets, round bar that is Fabricated From High Quality Raw Materials. Carbon Steel A105 products are available in Following Specification, Grade and Sizes.

Forging fittings Carbon content 0.35% maximum and Silicon content 0.35% maximum, no minimum.

Carbon steel is defined as any steel with a carbon content not exceeding 2.1% by weight. As the carbon content increases, the ductility of the steel decreases, and carbon steel bolts become harder and increase in strength after heat treatment.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A516 CS 70 grade flanges are used in a variety of applications such as bridges, buildings, auto and truck parts, rail vehicles, pressure vessels, boilers, valves, heat exchangers, cargo containers, suitcases, construction equipment, structural pipes and Power poles, etc.

There are different weights to the different dimensions of flanges as well. You can contact us to get a ASTM A105 flanges weight chart to understand more about the flange weights and to choose from a host of flanges.

Carbon steel LF3 bars are mainly used in the construction of skyscraper bridges and shipbuilding. Carbon steel LF3 threaded rods are commonly used in pharmaceutical equipment. Carbon steel LF3 round bars are also widely used in heat exchangers and valves.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We are a manufacturer, supplier and exporter of Alloy Steel ASTM A234 WP22 Buttweld Fittings that form meaningful connections between multiple pipes of various sizes.

For the seamless steel pipe fittings refers to the fittings raw material from the seamless steel pipes and tubes. Thus the welded steel pipe fittings covers the fittings raw material from welded steel pipes.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material.

The high strength of ASTM A350 LF2 carbon steel square bar presents an opportunity to reduce weight and cost as thinner materials can be used.

The A420 Grade WPL6 fitting is used in pipelines in the paper and pulp industries, condensers, sea water, marine engineering, waste water management and pollution control systems.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

ASTM A105 Forged Fittings for various right industrial solutions. The product to the domestic and global patrons is offered at most attractive rates. The product is manufactured in accordance with various raw materials standard qualities. They are enjoying having a good reputation in the market.

A106 steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

pipe is usually welded to the Lap Joint flange and it is free to rotate around the stub end. It is frequently used for applications that needs frequent dismantling.There are different types such as the SA105N Blind Flange which is used to close a pipe line.

ASTM A234 is the standard of pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WPB is one of the steel grade in this standard.W means weldable,P means pressure,B is grade b,refer to the minimum yield strength,like the astm A106 A53,Gr.B or API 5L Gr.B.A234 WPB is the most common carbon steel pipe fittings material.

ASTM A350 LF3 Carbon Steel Round Bars are designed and developed to international quality standards. We have ready stock to ship to most parts of the country. These ASTM A350 LF3 carbon steel round bars are made of high grade corrosion resistant metal alloys.

Carbon steel LF3 round bars have the best corrosion resistance to general corrosion.

ASTM A234 standard steel pipe fittings have been widely applied in pipeline systems, it includes carbon and alloy steel material.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A234 WPB short radius in accordance with ASME B16.9.Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in the butt-welding form in accordance with ASME B16.9 or ASME B16.49.

Material for forgings shall consist of ingots or forged, rolled, or strandcast blooms, billets, slabs or bars. The Carbon Steel A350 LF2 Flanges have a minimum tensile strength of 485MPa and a minimum yield strength of 250MPa. In addition to being forged, the materials used to produce the A350 LF2 Welding Neck Flange are to be heat treated along with a heat and product analysis conducted on them.

Knowing the finish of these steels can be helpful if your pipes are visible and appearance is on the list of considerations. Stainless steel is usually glossy and can retain that gloss if exposed to weather and other factors. Carbon steel, on the other hand, is darker in color and usually has a matte finish when painted. Unfortunately, it can also rust and look bad if left exposed. Galvanizing is also an option.