ASTM A234Gr.WPB CR 21-12SCH40 SMLS ASME B16.9

ASTM A105 is the most generally utilized carbon steel material grade that used to manufacture forge piping components, for example, flange and forged fittings of small diameter piping.

a105 lap joint flange slide directly over the pipe and are most commonly used with stub end fittings.

It is mainly used for welded pressure vessels where improved notch toughness is required.

ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

Flanges are an integral part of the process industry. Most industries, including oil and gas, water treatment, and nuclear power generation, use pipes that allow media to flow between different plant units. Components such as fittings and carbon steel SA105 pipe flanges help regulate the flow of said media.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

ASTM A105 is most commonly used for carbon steel material grade which is used to manufacture forge piping components such as flange and forged fittings of small diameter piping. A105 flange has Tempering of 1100 F followed by air cooling. We are biggest Manufacturer of A105 Steel Flanges.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

Some of its applications are power generation, pulp and paper industry, power offshore oil drilling industry, specialty chemicals and pharmaceuticals. Other applications where it is found to be used are condensers, gas handling, chemical equipment, seawater equipment, pharmaceutical equipment and heat exchangers.

ASTM A694 carbon steel round bars have different properties due to the presence of alloying elements. Some of the properties inherited by round bars are good ductility, durability, high tensile strength, high temperature stability, high yield strength, high toughness, etc. This is why round bars are used in petrochemical, pharmaceutical, railway, chemical equipment and other industries. Therefore, industrial applications have a smooth flow at work.

In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

The pipe fittings of special shape or those not suitable for die forging can be manufactured by free forging process.The rough shape of pipe fitting should be forged by free forging; If the tee, should be forged out of the branch pipe.

Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe.

Carbon steel LF2 bars are mainly used in food processing installations and the pulp and paper industry.

Astm 515 gr 70 is a medium carbon alloy that also contains certain amounts of manganese, phosphorus, sulfur and silicon.

Forgings mainly include die forging, free forging and cutting forming processes to manufacture pipe fittings.

ASTM A105 Pipe Flanges are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of ASTM A105 Carbon Steel Flanges through a worldwide network of stock-keeping branches. These ASTM A105 Carbon Flange is use in various industries

Flanges manufactured to ASTM A350 LF3 requirements can withstand temperatures as low as 150 degrees Fahrenheit (LF3).

Carbon steel pipe flanges usually adopt mild steel or low carbon steel, as it includes small percentage of carbon, strong and tough but not readily tempered. Which with lower cost and material could be used for many applications.

ASTM A234 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service. Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in butt-welding form in accordance with ASME B16.9 or ASME B16.49. There are two carbon steel grades: WPB and WPC, of which ASTM A234 WPB is mostly often used in pipeline industry. The A234 WPB butt-welding pipe fittings include elbows, bends, returns, tees, reducers, end caps, crosses, lap joint stub ends, nipples and couplings.
After forming at an elevated temperature, fittings are cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperatures specified are metal (part) temperatures. Heat-treated fittings are to be treated according to paragraph 7 in Specification A960/A960M.

Due to the high chromium content, these carbon steels have very good corrosion resistance.

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

Flanges are used to connect 2 ends of a pipe or to end a pipe. They are available in various materials. Carbon Steel Flanges are one such type of flange that is usually made up of carbon steel.

There are the pressure grade ASTM A234 WPB Pipe Fittings in ? inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.It does not cover cast welding fittings which refered standards are ASTM A216/A216M and A217/217M.

ASTM A105 Socket weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

ASTM 694 round bars are long cylindrical metal rods primarily used in industrial and commercial applications. However, of all applications, the most common type of application is the shaft. These rods are available in different diameters and can be used in the application. The steel round bars there are available for both cold and hot rolling processes. They have a perfect finish and precise diameter.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.