hastelloy c276 tube

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The Alloy 800H Pipe works well in applications when they are exposed to high temperatures for a prolonged period of time.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Incoloy Alloy 601 Tubing can use in carburizing equipment, heating-element sheathing, process piping, heat exchangers, nuclear steam-generator tubing, and Incoloy Alloy 601 Tubing can be used in heat-treating equipment, chemical and petrochemical processing, power plants, industrial furnaces as well.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy C-276 can be forged, hot upset and impact extruded. Although the alloy tends to work harden, it can be successfully deep drawn, spun, press formed or stamped. All common welding methods can be used to weld Alloy C-276, but oxyacetylene and submerged arc processes are not recommended when the manufactured item is intended for corrosion service. Special precautions should be taken to avoid excessive heat input.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

Solved other issues concerning fabricability. Stringent chemistry control along with years of development has resulted in the alloy used today, both in Alloy B2 and Alloy B-3.

Inconel 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Inconel 600 also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. in Inconel 600 material is mostly required in form of Inconel Pipe, Inconel 600 Plate, Inconel 600 Pipes, Inconel 600 Tubes, Inconel 600 Pipe fittings, Inconel 600 Flange
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

ASTM B619 welded pipe for the pharmaceutical industry has good corrosion resistance, especially to high purity water. And they also show good resistance to corrosion by buffer solutions used to prepare pharmaceuticals if ASTM B619 UNS N10276 is also exposed to cleaning supplies.

UNS N06601 welded pipe is used in countless industries, key industries including aerospace, heat treatment, chemical processing, pollution control and power generation.

Monel400 alloy is a versatile material that can be used in many industrial applications

Monel 400 is well known for its high strength and corrosion resistant properties. It works in a wide range of temperatures, and is available in multiple forms for a variety of products. Monel 400 is used extensively in (for pipe) piping. Resistant to both steam and seawater, its toughness and anti-corrosive properties make it perfect for heavy duty applications such as transfer (pipe) piping used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Monel 400 is a popular nickel-copper alloy commonly used in high performance applications. The alloy has high resistance to acidic and alkaline environments, high strength, good ductility and thermal conductivity. Monel 400® is suitable for use in the subzero to 1,000°F (538°C) temperature range and can only be hardened by cold work.

Inconel 718 is an age-hardenable Alloy-chromium alloy that combines corrosion resistance with high strength and good fabricability. It has high creep-rupture strength at temperatures up to 700 ¡æ. Its excellent relaxation resistance contributes to its application in springs.

Alloy C-276 is one of the most common corrosion resistant alloys available today. It is used in a variety of environments from moderately oxidizing to strongly reducing conditions. Alloy C-276 has excellent resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

Hastelloy C-22 can be used in conjunction with Hastelloy C-276 to prevent joint corrosion. Its composition is nickel-chromium-molybdenum-tungsten, giving it some of the resistance that is characteristic of C-276. The metal is excellent against overall and localized corrosion, along with chemical, oxidation, and reducing environments. Tests in environments containing wet chlorine and nitric acid have also proved that Hastelloy C-22 shows exceptional resistance. However, one unique characteristic is its weldability, which allows the metal to be used as a filler in many cases where other metals have failed to stop corrosion. These characteristics make Hastelloy C-22 commonly applied in chemical productions for food and beverages and pharmaceutical tools.

The Hastelloy C276 round tube is manufactured from a high temperature heat resistant alloy, which contributes to its widespread use in the power industry. Whereas, Hastelloy C276 pipe exhibits outstanding properties such as high wear resistance, corrosion resistance and longer service life due to the raw materials used in its processing.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 718 Welded Pipe is a nickel-chromium-molybdenum alloy designed to resist a variety of severe corrosive environments, pitting and crevice corrosion. Inconel 718 EFW pipe is a nickel-chromium alloy that is precipitation hardenable with high creep rupture strength at elevated temperatures up to approximately 1300 degrees Fahrenheit (700 degrees Celsius). Inconel 718 ERW tube has excellent mechanical properties at high and low temperatures.

As typical of most nickel-chromium alloys, Incoloy 800 has excellent mechanical properties and their corrosion resistance properties surpass many stainless steel alloys. Incoloy 800 Tube manufacturers produce these components keeping in accordance with ASTM B163.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Compared to stainless steel, this material has a lower yield strength of 148MPa minimum and 462MPa minimum tensile strength. Nickel 200 ERW pipe is also dense as it contains 99% nickel as well as carbon manganese, silicon, iron, sulfur and copper. The density is 8.9 grams per cubic centimeter.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

This is because when Inconel is subjected to very high heat it forms a very stable oxide layer which thus protects the surface of the metal from further corrosion. This process is called ¡®passivation¡¯ and it is a very beneficial chemical reaction that effectively means that Inconel builds its own ¡®shield¡¯ against future damage.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The ASTM B622 Hastelloy B2 Seamless Pipe especially is known to exhibit excellent resistance to corrosion in aggressive reducing media such as hydrochloric acid.

Nickel based alloys are very useful materials for the manufacture of high quality tubing products. One of the key reasons is that they offer excellent corrosion resistance in both aqueous and high temperature applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

These tubes are available in round, hollow, rectangular, hydraulic, coiled and different other shapes. Welded nickel alloy pipes are produced by welding steel pieces together with the help of fillers. These welded tubes are available in sizes between 5mm and 1219.2mm. We are Nickel Alloy Tube Manufacturer and can customize all our products according to your requirements in different shapes and sizes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

Monel400 is a single-phase solid solution Ni-Cu corrosion-resistant alloy.

That’s why our customers prefer to work with nickel alloy tubes. In addition, nickel alloy tubes have good thermal, electrical and magnetostrictive properties. The relatively high thermal conductivity of this grade of nickel tubing results in its frequent use as part of heat exchangers.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

This passivation process also results in Inconel being able to retain its strength over a very wide range of temperatures. Other metals, such as aluminium, may not be able to withstand.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Talking about the general properties exhibited by Incoloy 800 grades, Incoloy 800/800H/800HT pipe exhibits excellent corrosion resistance, pitting resistance in chloride environments, resistance to various acidic environments, good general corrosion resistance, flow resistance Grain alloy crack corrosion, crevice corrosion resistance and easier weldability and hardness.

Inconel 625 Tube may be furnished bare or coated and with capped ends. tubes up to 3¡± OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Incoloy Seamless Tubes may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3¡± OD will be supplied loose.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Alloy C 276 (UNS N10276/ 2.4819) is known for its corrosion resistance in a variety of corrosive media. The high molybdenum content imparts resistance to localized corrosion such as pitting. Low carbon minimizes carbide precipitation during welding to maintain the resistance of the welded joint heat affected zone to intergranular erosion. It is used in chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of “sour” natural gas. Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack gas reheaters, fans and fan guards. In chemical processing, the alloy is used to make components such as heat exchangers, reaction vessels, evaporators and transfer piping.