tubo acero de niquel hastelloy c276 NW 0276

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is used in flue gas desulfurizations systems because of its excellent resistance to sulfur compounds and chloride ions encountered in most scrubbers. C-276 alloy has excellent resistance to pitting and to stress- corrosion cracking.

Bushings, also known as sleeve bearings, are just one specific type of bearing. They slide on the rod to provide extremely low friction movement. They are ideal for shock absorption and minimise energy consumption, noise and wear.

Hastelloy G30 is resistant to grain precipitation in high temperature regions. Hastelloy G30 fasteners exhibit physical properties such as thermal conductivity, elongation, and elastic modulus. Hastelloy G30 has properties such as yield strength and tensile strength. Our company supplies these fasteners to oil and gas, refineries, fertilizers, heat exchangers. These fasteners are also used in water treatment, sugar, dairy and food processing. It also shows density, area reduction, and coefficient of linear thermal expansion. Our Hastelloy G30 fasteners are highly resistant to hydrochloric and nitric acids. The alloy has superior resistance to industrial phosphoric acid. Hastelloy G30 fasteners perform well in corrosive environments.

In chemical processing, the alloy is used for components including heat exchangers, reaction vessels, evaporators and transfer piping.

Hastelloy X Bolts have been widely used in combustion zone components of turbine engines such as transition ducts, combustion chambers, booms and flame holders, as well as afterburners, exhaust pipes and cabin heaters. This alloy is recommended for industrial furnace applications due to its unusual resistance to oxidation, reduction and neutral atmosphere.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents (such as ferric chloride and cupric chloride), hot fouling media (organic and inorganic), chlorine, formic and acetic acid, acetic anhydride, and seawater and saline solution. In fact, these Hastelloy c276 fasteners can be used in oxidizing atmospheres up to 1900¡ãF. Additionally, Hastelloy c276 hex bolts tend to perform extremely well in high pressure environments. For example, ASTM B574 bolts perform well at pressures around 5400 kPa during acid leaching.

B3 Hastelloy Flanges has some excellent features to offer like fine finish, accurate range, and durable.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Alloy C276 Seamless Nickel Tube is a nickel molybdenum chromium alloy with added tungsten for excellent corrosion resistance in a wide range of harsh environments. The high molybdenum content makes this alloy particularly resistant to pitting and crevice corrosion.

We have a comprehensive inventory of nickel alloy forged fittings, socket weld and threaded fittings in all types, sizes, schedules and pressures. HT PIPE specializes in the manufacture of nickel alloy forged fittings that are in high demand in many applications in the naval, chemical processing, marine, petrochemical and refining, and oil and gas markets.

HASTELLOY G-30 alloy is a high-chromium nickel-based alloy that exhibits corrosion resistance superior to most other nickel- and iron-based alloys in commercial phosphoric acid and in many complex environments containing highly oxidizing acids such as nitric/hydrochloric acid, Nitric/hydrofluoric and sulfuric acid. The resistance of G-30 alloy to the formation of grain boundary precipitates in the heat affected zone makes it suitable for the as-welded condition in most chemical processing applications.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

C-22 is used in severely corrosive media with high chloride and temperature applications such as buffer solutions, active pharmaceutical ingredients (API), fabric softeners, cleaning supplies, and fish, soy and chili sauce.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C276 SB575 4mm Thick Plate is by far the most commonly used alloy in different industries.

The pipes are phosphoric acid, acetic and formic acid resistant. Also, it to various temperature and concentrations is hydrochloric acid resistance.

They combine the outstanding resistance to the oxidizing medium of Hastelloy C276 with superior resistance to non-oxidizing situations.

The alloy can be used in phosphoric acid and acetic acid and a range of organic acids. Hastelloy B2 alloy is having chloride induced SCC resistance.

These fasteners are designed according to the quality of raw materials according to national and international standards, thus ensuring their durability and high quality.

There are different sizes according to different standards of ASTM B574 UNS N10276 Fasteners. Hastelloy C276 alloy is very easy to manufacture and does not require heat treatment after welding. Hastelloy C276 alloy excels in many industrial applications (i.e. chemical processing).

Alloy C276 is a Ni-Cr-Mo alloy containing W and very low carbon and Si content.

Prefabrication can be of many different types and undertaken at many different scales, from fabrication of small components and sub-assemblies through to large welded and bolted assemblies requiring significant logistical challenge to transport to site

Hastelloy C22 alloy includes nickel, chromium, molybdenum, and tungsten, which result in extreme resistance to pitting and stress corrosion cracking.

The corrosion resistance property of the alloy is credited to the addition of both Molybdenum and nickel.

Prefabricated steel s take advantage of offsite prefabrication to improve the speed or erection and cost predictability of the solution.

The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.

Hastelloy C276 Fastener is a wrought corrosion resistant alloy that resists the development of grain boundary precipitates that reduce corrosion resistance. C276 alloy fasteners have good machinability and are used for desulfurization of flue gas equipment and chemical process equipment. Hastelloy C276 bolts are commonly used to hold materials or objects together, or to position objects. A fastener that usually consists of a head on one end and a chamfer on the other. It is typically used in solution treated condition and soaked at 1121¡ãC (2050¡ãF) and then flash quenched.

Controlling other alloying elements such as iron and chromium

Pipe or tube is bent using a combination of dies and other various components working in a rotary action.