nickel alloy fiber exhaust pipe end cap

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Stainless steel tee fittings are tee fittings. It has two 90¡ã angled outlets and one inlet. These fittings may have threads on the ends. These accessories are used in several industries such as oil refining, water treatment and other treatment units. Tee fittings are available in different sizes and shapes, including straight tees, equal tees, reducing tees, Y tees, transverse tees, male and female branch tees, and male and female tees.

Forged fittings are used to join, branch, blind or route small diameter piping systems (usually less than 2 inches).

Like the other socket pipe fittings, it has a ladder shaped area, so to insert the pipe into the tee branches then welding together. It usually used for small diameter tubing systems.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.

A182-F11 is an American standard pearlitic structure heat-resistant steel forgings, the execution standard: ASTM-A182/A182M-2017.

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Socket Weld Elbow and Threaded Elbow Fitting is a fitting installed between two lengths of pipe or tubing allowing a change of direction, usually 180¡ã, 90¡ã or 45¡ã. Nickel Alloy Elbows are available in short and long radius types.

Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.

A?threadolet?is the same basic design as a “weldolet.” However the main difference is the fitting has a female threaded connection to mate to the branch connection. This makes a 90¡ã branch and comes in full size or reducing for a straight piece of pipe.

Hastelloy C276 is resistant to localized corrosion such as pitting and stress corrosion cracking.

The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. IN625 has good corrosion resistance in various corrosive environments.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

Inconel 625 Butt weld Pipe Fittings, Stockist of Inconel UNS N06600 Buttweld Pipe Fittings, Inconel 601 Elbow Dealer in India, 718 Alloy Buttweld Fitting, Global Supplier of Inconel 600 Butt weld Pipe Fittings, ANSI B16.9 Inconel 625 Reducer, B366 Inconel 601 Commercial Pipe Fittings.

AISI 316 stainless steel has better corrosion resistance than 304 stainless steel and has good corrosion resistance in pulp and paper production. In addition, 316 SS has good corrosion resistance in marine and corrosive industrial environments.

We are exporters and suppliers of Inconel DIN No. 2.4856 Pipe Tees that are heavy-duty, leak-free and corrosion proof. Also We offer wide range of Inconel ASTM B366 600 Pipe Fittings such as Inconel 600 Tee, Alloy 601 End Pipe Cap, Inconel 625 reducer, Inconel Alloy 718 cross, Inconel 600 elbow, Inconel 625 stub ends etc.

The body of a pipe coupling is typically made of either the same or similar materials as that of the pipes it joins. They may be rigid or flexible depending on the amount of movement the pipe is subjected to and may also be permanent or removable.?

HT PIPE has a large range of finished and semi-finished stainless steel elbows, caps, tees, reducers, crosses, stub ends and many other stainless steel butt welding fittings, widely used in power plants, oil and gas, water treatment, food Process, petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in combination with our other plumbing products.

Inconel 718 is a nickel-based precipitation hardening alloy designed for very high yield strength, tensile strength and creep rupture properties at temperatures up to 1300ºF (705ºC). This alloy has excellent solderability.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

Nickel Alloy C-276 and Hastelloy C-276 can be welded by all common welding methods (oxyacetylene is not recommended).

The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness.

For applications requiring greater resistance to stress rupture and creep, especially at temperatures above 1500¡ãF (816¡ãC), INCOLOY alloys 800H and 800HT are used.

Monel 400 contains the same levels of nickel and copper as the natural nickel ore found.

This product is widely used because of its reliability, simple application and cost-effectiveness. They are used to provide smaller branches that form larger diameter running pipes. The socket is suitable for small diameter pipes with high pressure and high temperature.

Hastelloy can be used with all common welding methods, but oxyacetylene and submerged arc processes are not recommended when the manufactured product is intended for corrosion service.

Typical applications for copper-nickel 70/30 forged fittings are condensers, seawater piping, power plants, exchanger housings, etc. These cupronickel 70/30 fittings can be further customized in thickness and size according to customer specific requirements.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

INCONEL nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance.

The products offered are appreciated in the market due to the best performance and good quality of the products. These nickel alloy 200 outlet fittings are used in pharmaceutical plants, industrial machinery, chemical plants, oil refineries, textile machinery, sugar plants, fertilizer plants, power and cement industries, petrochemical plants, etc. We also offer 200 custom nickel Olets fitting sizes.