p91 alloy steel pipes

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C22/C276 pipes and tubes are manufactured by mechanical treatment or electroplating and machining. The inner and outer surfaces of the Hastelloy tubing are electropolished for a uniform appearance.

Alloy 625 nickel pipe is made from a nickel-chromium-molybdenum alloy with an addition of niobium. High strength and toughness from cryogenic temperatures to 1800 F. Good oxidation resistance, exceptional fatigue strength, and good resistance to many corrosives. Typical applications include chemical processing, aerospace and marine engineering, pollution control equipment, and nuclear reactors.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The Alloy 800H Tube has good machining characteristics as seen in iron-based alloy and they tend to work-harden during the machining process.

La aleacion 20 contiene acido sulfurico y muchos medios agresivos. La aleacion esta estabilizada con niobio que le ayuda a resistir la corrosion intergranular. La aleacion 20 puede ayudar a proporcionar ahorros de costos potenciales en comparacion con las aleaciones con mayor contenido de niquel, ya que supera al acero inoxidable estandar.

800H can not be corroded in many kinds of media. Its high nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High Chromium content made it can better resist pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid corrosion, but it is not so fine in the sulfuric acid and hydrochloric acid.

Alloy 625 is generally supplied in the annealed condition, to provide utmost stability during fabrication and subsequent service. INCONEL 625 alloy has found to have a resistance to potable and salt or brackish water, where Chloride ions cause pitting and crevice corrosion to become established. As a result, pipelines for gathering sour gas have been built with solid (or clad) INCONEL 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

As previously mentioned, one of Inconel¡¯s benefits is its ability to be used in ¡®extreme¡¯ environments. These ¡®extremes¡¯ are either extreme temperature or extreme pressure.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

These hastelloy c22 pipe are considered to be versatile due to corrosion and heat resistant. Also, it offers excellent resistance to pitting and stress corrosion cracking resistance and also resistant to a high-temperature atmosphere.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Monel 400 has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The composition is shown in the Table below.

Nickel alloys are mainly nickel 200 and nickel 201. These nickel alloys are often used to make strong quality pipes. They have high resistance. They are commonly used in aircraft gas turbines, steam turbine power plants, medical applications, nuclear power systems, chemical and petrochemical industries. Pipes and tubing made of nickel alloys are environmentally friendly and easy to maintain.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800¡ãF. After annealing, the Inconel alloy tubes is cooled in air. The alloy has superior resistance to Carburization.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

As an alloy, since Hastelloy has outstanding corrosion resistance properties to highly oxidizing and reducing agents, Hastelloy tube suppliers recommend this alloy to clients all across the world as the material for Hastelloy Seamless Tubes serves as a great choice for moderate to severe corrosive environment settings. Hastelloy Heat Exchanger Tube is commonly used in applications for pipes and valves in the chemical processing as well as petrochemical industries. Hastelloy Welded tubing is also used in nuclear reactors and chemical reactors. Further, Hastelloy Round Tube is also known to demonstrate excellent use for pressure vessels and heat exchangers.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Because of Inconel Pipe Making Machine, the colossal range of Inconel Tube like Inconel Exhaust Tubing and Inconel Condenser Tube others of the likes of Inconel Seamless Tube that we have in stock, our clients thus have the greatest of product flexibility of Inconel Alloy Square Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

This passivating oxide layer protects the surface of the Inconel Pipe making it resistant to heat. . In addition to being resistant to heat, Inconel Pipe has a high resistance to corrosion, pressure as well as resistance to oxidation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy Alloy B2 Pipes is known for its excellent chemical resistance, suited to high pressure and high temperature applications.

Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on.

The pipes to the buyers are supplied at market leading rates.

Therefore, pure nickel alloy or high nickel alloy seamless pipes are only used for applications that require this feature and cannot be replaced by anything else. These polished pipes can be pure straight pipes or other shapes. The most commonly used shape is the round tube. But in addition to hot-worked nickel alloy round tubes, there are square, hexagonal and rectangular tubes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.38

La tuberia Incoloy Alloy 20 ERW tambien se puede utilizar en las industrias de plasticos, petroleo, alimentos y farmaceutica. La tuberia de aleacion 20 exhibe excelentes propiedades quimicas a temperaturas ambiente y elevadas de hasta 930 grados Fahrenheit.

Inconel 600 alloy is specially made to use high-temperature application and it can be bear up to 2000 degree F temperature. The high nickel content increases its specific quality like improve resistance in reducing the environment, resistance to corrosion by many inorganic and organic elements. Because of nickel alloy the Inconel 600 alloy resistance to chloride stress corrosion and also resistance to many acids.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel 201 is pure commercial nickel with very low carbon content and has been approved for service in high temperature environments up to 1230¡ãC.

Hastelloy B2 Round Pipes (UNS N10665) is used for most chemical process applications in the welded condition, gasoline refining.

These Seamless Pipes is nickel-base, where chromium imparts resistance to high temperature corrosion. The ease and economy with which the Welded Pipes can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, it have resulted in its use in a wide range of applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Corrugated Stainless Steel Tubing is stainless steel tubes with helical groove obtained from a plain tube by cold forming. The quantity of Helix and Angle could be designed to optimize the heat transfer performance.

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance, toughness and wear resistance. As a supplier of seamless and welded alloy steel pipes, Federal Steel specializes in the production of “chrome molybdenum” SA335 pipes in grades P5, P9, P11, P22 and P91. Chromium molybdenum power pipes are widely used in power plants around the world.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy B2 should not be used at temperatures between 1000¡ãF and 1600¡ãF as the alloy forms secondary phases that could decrease the ductility of the material.

Alloy 22 (UNS N06022) is the most versatile Nickel Chromium Molybdenum Tungsten alloy with controlled Iron. Due to Alloy 22’s content this alloy exhibits excellent resistance to both oxidising and reducing acid environments as well as those containing mixed acids.

Although there are several variants of Hastelloy nickel alloys, Hastelloy C-276 is by far the most widely used.