The exhibition of Zhengzhou Huitong Inconel 718 LWN flanges

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel Pipes is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, Inconel ERW Pipes is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

Inconel 600 fittings are made from a nickel-chromium alloy that contains a minimum of 72% nickel and 14% chromium in a composition with carbon, manganese, silicon, sulfur, copper and iron.

Inconel 718 hex bolts are precipitation hardened bolts made from an alloy containing nickel as a base element, chromium and molybdenum, with additions of aluminum, titanium and cobalt. This alloy combines corrosion resistance and high strength with excellent weldability, including resistance to post-weld cracking. Inconel 718 has excellent creep rupture strength at elevated temperatures. Inconel 718 fasteners have been used in gas turbines, rocket engines, spacecraft, nuclear reactors, pumps and tools.

The Alloy 601 Flanges have 550MPa minimum tensile strength, 205MPa minimum yield strength and 30% elongation rate.

The versatility of ASTM B166 600 Inconel Rod has led to the alloy being used in a variety of applications, especially those involving a temperature range from cryogenic to above 2000¡ãF.

Inconel 600 bolts can be stretched up to 40% and still have excellent machinability. This Alloy 600 bolt has excellent creep rupture performance at elevated temperatures. These bolts are widely used in the petrochemical, chemical and natural gas industries.

Some typical applications for Inconel 625 include chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors.

Alloy 600 is relatively immune to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy is resistant to steam and mixtures of steam, air and carbon dioxide.

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 718 corrosion resistant fasteners retain their strength and shape over a wide temperature range and do not exhibit the creep of aluminum and steel products during temperature changes.

Nickel alloy 718 hex bolts and other fasteners are available in lengths from 3mm to 200mm. Hex bolts are used for easy reinforcement because the hex head can handle high torque values when tightening.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength.

UNS NO 6625 WN Flangs Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.

Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on.

ASTM B564 601 Raised Face Flange nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 718 flanges are also used in jet engines, pump bodies and parts, rocket engines and thrust reversers, nuclear fuel element gaskets, hot extrusion tools, and more.

Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.

Inconel 718 Nuts, also known as Alloy 718, are a precipitation hardening (also known as age hardening) form of Inconel 625. This heating and quenching process is used to change the atomic structure of the alloy, making it stronger by locking the metal’s grain structure in place. Additional strength can be obtained by cold working.

Alloy 625 rods are commonly used in oil and gas production where hydrogen sulfide and elemental sulfur are present at temperatures in excess of 150 degrees Celsius. These Nickel 625 round bars are very resistant to seawater under flowing and stagnant conditions as well as under fouling conditions.

As an alloy, Inconel 625 consists primarily of nickel, chromium and molybdenum. In addition to these three main metals, trace amounts of niobium are added to the alloy. Alloying any metal will not only enhance its physical properties, but also its mechanical properties. At this point, the addition of molybdenum and niobium to ASTM B446 Inconel 625 forged bar helps strengthen the alloy matrix. The rigid matrix of Alloy 625 bar provides high tensile strength without the use of strengthening heat treatments.

Inconel Alloy 600 Pipes has a larger pressure fast resistance in condensation group nuclear devices for piping, centrifuges and weldments.

UNS NO 6601 WN Flangs Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 718 is a nickel-based superalloy ideal for applications requiring high strength in the temperature range from cryogenic to 1400¡ãF. Inconel 718 also has excellent tensile and impact strength.

Its typical corrosion applications include titanium dioxide production (chloride route), perchloroethylene synthesis, vinyl chloride monomer (VCM) and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treatment, phenol condensers, soap making, vegetable and fatty acid containers, and more.

2.4851 Pipes are known to have a high degree of metallurgical stability. The base nickel content, combined with the substantial chromium content added to Inconel 601 seamless pipe, is not only resistant to many environments containing corrosive media, but also to high temperature environments.

The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.

Alloy 600 / Inconel 600 is a combination of nickel chromium and iron that provides the standard material for the chemical industry and the automotive engine, aero engine and airframe sectors. Controlled chemical composition is restricted for use in the nuclear industry to eliminate the risk of stress corrosion cracking in high-purity water containing chloride ions.

The inconel 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Inconel 625 round bar is one of the more common grades of Inconel round bar available. The Round Bar is AMS 5666 compliant. Inconel 625 can be used in a variety of applications. Inconel 625 has high strength, excellent fabrication and excellent corrosion resistance. The viable temperature range for Inconel 625 starts at cryogenic temperatures up to 1800¡ãF.

Inconel 718 is a precipitation hardening nickel-chromium based superalloy. ASTM B637 UNS N07718 round bars also contain significant amounts of elements such as iron, niobium and molybdenum, and trace amounts of metals such as aluminum and titanium. Aluminum and titanium make Inconel 718 hardenable.