ASTM B424 UNS N08825 spacer ring with additions of molybdenum

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Typical applications for alloy 800 and 800H are – Heat exchangers and process piping; carburizing fixtures and retorts; furnace components; electric range heating-element sheathing; extruded tubing for ethylene and steam methane reforming furnaces; ammonia effluent coolers.

The inclusion of chromium in combination with nickel in its chemistry makes it resilient to chemical and environmental corrosion.

The chemical balance allows the alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. 800HT will not become embrittled even after long periods of usage in the 1200-1600 deg F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. 800HT can be welded by the common techniques used on stainless steels.

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

The Alloy 800H Tube has good machining characteristics as seen in iron-based alloy and they tend to work-harden during the machining process.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Alloy 718 Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

Incoloy is a group of superalloys mainly made of nickel, iron and chromium. They are designed for corrosion resistance and high creep and rupture properties. Incoloy 825 round bar uses additional copper and molybdenum.

In addition to oxidation, the metal is also resistant to the effects of carburization. As an austenitic stainless steel type, this alloy has some temperature limitations, but has the advantage of varying the carbon content.

Nickel 800 cold rolled bars run on the die shortly after the hot rolling process, allowing the bars to exhibit exceptional strength and excellent surface finish. Alloy 800 Bright Bar is an aesthetically appealing grade that can be produced in different finishes and sizes.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength.

Incoloy Alloy 800HT applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service. In power generation, superheater and reheater tubing has also employed the material.

The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase.

Incoloy 800 fasteners resist oxidation at high temperatures, a problem with most stainless steel alloys. Fasteners made from Incoloy 800 are also in great demand in petrochemical and chemical processing. Even when exposed to very high temperatures, Incoloy 800H fasteners maintain a very stable structure, making them very practical and sought after in many industries.

These tubes have a yield strength between 30 to 60ksi and can be readily elongated by 60-30% in the system.

For high temperature applications requiring optimum rupture and creep properties, Alloy 800H Plate (UNS N08810 Plate) and Alloy INCOLOY 800HT Coil (UNS N08811 Coil) are used. These are also known as WNR 1.4876Sheets, WNR 1.4958 Plates, and WNR 1.4859 Coils.

ASTM B472 UNS N08020 Flanges Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.

Incoloy 800H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep-rupture strength.

ASTM B564 Inconel 718 Threaded Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications.

Due to its high strength and stiffness properties, Inconel 800 is an alloy that is ideal for demanding applications including the marine engineering, aerospace, and chemical processing industries.

ASTM B564 UNS N08810 Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 825 is stable annealed at 940°C. The softest structure was obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitivity.

The higher strength results from close control of carbon, aluminum, and titanium contents in conjunction with a high temp anneal.

Incoloy 800, 800H and 800 HT are premium alloys composed of a combination of iron, nickel and chromium that provide excellent strength and better resistance to rust and carburization to avoid exposure to extreme high temperature conditions.

AS1210 Prequalified Incoloy 800 can be used at 800¡ãC. ASME codes allow Incoloy 800 to 815¡ãC, and Incoloy 800H and 800HT to 982¡ãC.

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.

They can be used in pressure vessels with a wall temperature of 800 degrees F. They also offer good resistance to stress corrosion cracking.

Both alloys have the same chemical composition as Alloy 800 plate (UNS N08800), but the carbon content is higher in both grades – (0.05 – 0.10%) in Alloy 800H and (0.06 in Alloy 800H) – 0.10% ) 800HT board.