DIN976 UNS N08825-Incoloy 825 full thread Nature Nickel Alloy flat head hex bolt 3-8 hex bolt Incoloy 825 hex bolt

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Incoloy Alloy 800 / 800H / 800HT Fasteners (Nuts and Bolts) series for extreme corrosion resistance even in sour environments. Due to the high nickel and chromium content, Incoloy 800 hex head bolts resist oxidation and carburization at high temperatures. The chemical balance allows Incoloy 800H square nuts to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres.

INCOLOY Alloy 800 can be hot worked in the temperature range of 871-1232¡ãC (1600-2250¡ãF).

Incoloy 800H and 800HT are members of the Incoloy 800 family of alloys and have the same chemical composition, but slightly different levels of carbon, titanium and aluminum. We manufacture Incoloy 800/H/HT fasteners with excellent resistance to oxidation, water and reducing environments. Due to their excellent tensile strength and toughness, these fasteners can operate efficiently in high temperature and high pressure environments.

UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Incoloy 800 was the first alloy as Incoloy 800H was slightly changed. To improve stress fracture properties, adjustments were made to control carbon and grain size.

Incoloy 800 fasteners resist oxidation at high temperatures, a problem with most stainless steel alloys. Fasteners made from Incoloy 800 are also in great demand in petrochemical and chemical processing. Even when exposed to very high temperatures, Incoloy 800H fasteners maintain a very stable structure, making them very practical and sought after in many industries.

Incoloy 800H Flange Incoloy 800 / 800H / 800HT Flanges are furnished with nickel-chromium-iron alloys that intend outstanding resistance and strength at harsh environments. The flanges exhibit superior resistance to chloride stress corrosion cracking and crevice corrosion. Even more, it also shows superior intergranular corrosion, stress rupture and creepy aspects. The welding of these flanges is done using various techniques such as MIG, TIG and more.

These Incoloy 800HT Bolt Elbow are made from high quality raw materials resulting in high quality Incoloy 800HT Bolt Elbow. They also have built-in compliance with applicable standards and laws. Additionally, the necessary standards, regulations and guidelines are followed in the manufacture of these Incoloy 800HT Bolted Elbow, resulting in a high quality product. These Incoloy 800HT Bolt Elbow are also well made.

Inconel 825 or Alloy 825 can be used for round bar, pipe, tube, sheet and plate. Inconel 825 is used in oil and gas or petrochemical applications and some marine and sour environments.

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium.

SB564 UNS N02200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800H is a solution heat treated (2100¡ãF/1150¡ãC), controlled-carbon version of alloy 800 with improved elevated temperature properties. It has improved creep and stress-rupture characteristics in the 1100¡ãF (593¡ãC) to 1800¡ãF (982¡ãC) temperature range.

Incoloy 800HT hot-rolled sheet is generally a nickel alloy sheet with a thickness of 3mm-5mm or more. Incoloy 800HT sheet inherits the superior corrosion resistance, high temperature resistance and fatigue resistance of Incoloy 800HT.

The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

Alloy A286 is a precipitation hardening combining high strength and good corrosion resistance, austenitic stainless steel designed for temperatures up to 1300¡ãF (704¡ãC) where high tensile strength, excellent creep strength is required and good corrosion resistance. Incoloy Alloy A286 is an iron-nickel-chromium based austenitic iron based material with additions of molybdenum and titanium. Cres A286 alloy is known for its good strength and oxidation resistance, especially at temperatures up to 1300¡ãF (700¡ãC).

Due to its high strength and stiffness properties, Inconel 800 is an alloy that is ideal for demanding applications including the marine engineering, aerospace, and chemical processing industries.

They are also resistant to sulfuric and phosphoric acid.

The fabrication of Alloy 825 is typical of nickel-base alloys, with material being readily formable and weldable by a variety of techniques.

N08825 Blind Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Typical applications for the alloy include ethylene pyrolysis, hydrocarbon cracking, cracking furnaces for vinyl chloride, diphenol and acetic acid. The alloy is also used for valves, fittings and other components exposed to corrosive attack from 1100 to 1800 deg F.

ASTM B564?INCOLOY 825 FLANGES Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY? alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

Alloy 926 (1.4529) screws are the perfect replacement for 316L when higher corrosion resistance is required without increased strength. Alloy 926 fasteners are considered a 6-molybdenum alloy (6-molybdenum or 6% molybdenum), similar to sister alloys AL6XN and SMO 254. In the stainless steel category, these 6 molybdenum alloys are considered very corrosion resistant.

Incoloy 800/800H/800HT pipes are mainly made of nickel-iron-chromium alloy, which has excellent resistance to carburization and oxidation, and has good tensile strength. These steel alloys are the same. The only difference is the percentage of aluminum and titanium in these alloys. However, if we talk about products like pipes and pipes, they are considered to be the most demanding and widely used products. Due to their exceptional properties and superior performance, these products are used in several industries and applications.

Incoloy is a group of superalloys with good electrical resistance and tolerances. Incoloy 800 is an alloy of iron, nickel and chromium. These alloys are extremely resistant to corrosion and oxidation. They are not easily deformed or broken down under extreme pressure and heat. The alloy has medium strength and Incoloy 800 material has excellent mechanical properties.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. Molybdenum and nitrogen contents significantly improve pitting and crevice corrosion resistance in halide media. At the same time, nickel and nitrogen not only ensure the stability of the metallographic phase, but also reduce the tendency of intergranular segregation during thermal process or welding process better than nitrogen content. Nickel alloy. 926 has exceptional corrosion resistance in chloride ion media due to its excellent localized corrosion resistance and 25% nickel alloy content.

Alloys 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure.

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

They are fabricated to improve their resistance to corrosion and are clean to weld. They are resistant to chloride pitting and sensitization.