hastelloy c276 round bar

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy B2 Flanges come under the ASTM B564 specification with sizes ranging from ? inches to 60 inches under different standards.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding

Although Alloy C276 plate has a higher rate of work hardening compared to its austenitic counterpart, in-process annealing may be required if nickel alloy C276 plate is to be work hardened to a higher degree. Solution annealing may be required if the deformation of the nickel C276 strip exceeds 15%.

These Hastelloy Alloy C276 Forgings is used for dissimilar welding applications including other nickel ¨C chromium ¨C molybdenum alloys and stainless steels, and for weld overlay or cladding of steels. The alloy is used in flue gas desulfurization systems. It has excellent resistance to pitting and stress corrosion cracking, and resists wet chlorine gas, hypochlorite and chlorine dioxide. The alloy is also resistant to seawater and brine solutions.

Alloy X is known for its excellent high temperature strength and can withstand temperatures up to 2200¡ãF. The alloy can also be easily fabricated by manual and automated methods with forming and welding properties. In addition, Hastelloy X is resistant to corrosion, heat and oxidation and can withstand reducing or neutral atmospheres and oxidation.

Hastelloy C276 Plates, which has excellent corrosion resistance in reducing environments. Inconel C276 Plates is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.

Hastelloy c276 sheets Coils, which has excellent resistance to pitting, crevice corrosion and stress corrosion cracking. Pulp and paper production for example is in need of our Hastelloy C276 Plates that can withstand the chemicals used for the treatment of certain types of paper.

HASTELLOY C276 is one of the few alloys resistant to wet chloride gas, hypochlorite and chlorine dioxide solutions.

This nickel alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

Today, Alloy B2 with restricted chemistry can be used in the welded condition and is less susceptible to SCC under many conditions. As always, care must taken in selecting the right alloy for the desired application.

The distinguishing feature of Hastelloy B3 hex bolts is their ability to maintain excellent ductility during transient exposure to intermediate temperatures. Hastelloy B3 bolts are made of an alloy containing nickel and molybdenum. These bolts are resistant to corrosion, pitting and stress corrosion cracking. These bolts can also withstand a variety of acid binding environments, such as those containing sulfuric, acetic, formic, and phosphoric acids.

Hastelloy C276 has excellent resistance to pitting, acid, crevice corrosion, and also in reducing the environment. This alloy is most widely used in many industrial applications because of its excellent qualities and features.

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.

Hastelloy Nickel Alloy B2 is a very chemically resistant alloy with high resistance to pitting and stress corrosion cracking in the heat affected zone. In particular, this alloy performs well in harsh environments such as sulfuric acid, hydrogen chloride and phosphoric acid. This nickel-molybdenum alloy is typically used under extreme reducing conditions and has a much lower composition of carbon, silicon and iron than Hastelloy B (Alloy B). Screws made from this alloy are also known as UNS N10665 fasteners.

Hastelloy C22, also known as Alloy C22, is a general purpose austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. High chromium content provides good oxidation resistance, while molybdenum and tungsten content provides good reduction resistance. Hastelloy C22 alloy also has excellent resistance to oxidizing aqueous media, including wet chlorine and nitric acid-containing mixtures or oxidizing acids containing chloride ions.

Hastelloy B2 pipe bend is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids.

Hastelloy X flanges are high-performance chromium-nickel iron molybdenum super alloy flanges that possess superior corrosion resistance consistency and durability.

B3 Hastelloy Flanges has special chemistry designed to achieve high thermals stability than the Alloy B 2, performing in easier fabrication.

A bushing is a type of bearing. Generally speaking, “bearings” facilitate movement between two components while reducing friction. Simple in design, a typical bearing has two surfaces that roll against each other, allowing the two mating parts to move without friction.

Hastelloy C276 Welded Pipe is ideal for chemical process applications in the as-welded condition. By adding tungsten to ASTM B622 UNS N10276 alloy C276 pipe, its corrosion resistance becomes superior.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

Hastelloy B3 Threaded Flange (UNS N10675) has great resistance to knife ¨C line and heat ¨C affected zone attack. Hastelloy B3 Slip On Flange has a special chemistry designed to achieve greater thermal stability than B-2 alloy, resulting in easier fabrication. Hastelloy B3 Spectacle Blind Flanges have good creep and oxidation resistance.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

HASTELLOY X pipe bend is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres.

The thermal stability of Hastelloy B3 pipes is superior.

Hastelloy c22 fasteners are also resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

HASTELLOY B-2 ALLOY. A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded.Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.