high quality competitive price 304 stainless steel weldolet

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

HT PIPE is a leading exporter, manufacturer, and supplier of SS 304 Forged Fittings with an ISO certification. They provide ultimate convenience to their clients by producing high-quality Stainless Steel 304 Forged Fittings offered at reasonable and competitive prices.

Hastelloy C276 bushings have excellent resistance to strong oxidizing salt solutions such as ferric chloride and cupric chloride. Alloy C-276 has excellent phosphoric acid resistance at all temperatures below boiling point and concentrations below 65%.

A?threadolet?is the same basic design as a “weldolet.” However the main difference is the fitting has a female threaded connection to mate to the branch connection. This makes a 90¡ã branch and comes in full size or reducing for a straight piece of pipe.

The B2 forged fitting is the cornerstone of a strong comic, and the composition of Hastelloy leverages it to have the necessary strength and quality standards to help it withstand a lot of stress for years to come.

HT PIPE is one of the leading manufacturers and exporters of high quality nickel alloy 201 pipe fittings, which are ferromagnetic.

Carbon steel ASTM A105 socket weld forged fittings are usually ¡°normalized¡± heat treatment, devoid of any internal stresses and thus having superior performances.

Stainless elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90¡ã or 45¡ã angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.

Most iron-based metals react with water to produce the reddish iron oxide known better as rust. The oxygen atoms in the water pulls iron off of the base metal to form the porous rust structure with no real strength.

The alloying element that makes steel ¡®stainless¡¯ is chromium; however it is the addition of nickel that enables stainless steel to become such a versatile alloy.

Bushings are similar to thin tubes most commonly used in machinery with rotating or sliding shafts to increase efficiency and reduce vibration and noise. Bushings can be used for drilling operations in drill stands, hydraulic external gear pumps and motors.

While it is a very useful metal, it is cost prohibitive in most applications. Monel 400 costs 5 to 10 times as much as regular nickel or copper.

Hastelloy C276 bushings are widely used in the harshest environments such as chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of sour natural gas.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

Tee for pipe fittings, pipe connectors. Also called pipe fittings tee or tee fittings, tee joints, used in the main pipe to branch pipe.

The products we offer meet standards such as ASME B16.11 and ANSI B16.9 and are regularly inspected at every stage of production to ensure high quality, corrosion resistance and high durability.

Nickel is so important that nickel-containing grades make up 75% of stainless steel production. The best-known of these are Type 304, which has 8% nickel and Type 316, which has 11%.

Resistant to various corrosive media. Chromium content provides better resistance in oxidizing conditions than alloys 200 and 201, while high nickel provides good resistance in reducing conditions.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

Threaded stainless steel fittings resist corrosion from aggressive chemicals, corrosive fluids, oils and gases, and withstand pressure and high temperatures in plumbing applications and food and dairy processing. Threaded fittings have threads on both ends of the connection. The female thread is on the inside of the fitting. The male threads are on the outside of the fitting and screw into the female threads.

Grade F22 is a low alloy steel containing nominally 2.25% Chromium. The alloy is widely used in the oil patch wellhead applications for connectors, hangers and block valves. Hardness levels up to 22 HRC are approved to NACE MR0175. The grade is often used as the base metal for clad components.
If supplied to ASTM A182 in the normalised and tempered condition, the 0.2% Proof Stress minimum is 30 KSI.Grade 22 of the ASTM A182 alloy steel is a low-alloy steel that contains 2.25% chromium. Often used as base metal for clad components, the F22 is also used in the oil patch wellhead applications for products such as hangers, connectors, and block valves, among others.

The body of a pipe coupling is typically made of either the same or similar materials as that of the pipes it joins. They may be rigid or flexible depending on the amount of movement the pipe is subjected to and may also be permanent or removable.?

Annealing is a heat treatment process mainly used to increase the ductility and reduce the hardness of the material. This change in hardness and ductility is the result of the reduction of dislocations in the crystal structure of the annealed material. Annealing is usually done after the material has undergone a hardening or cold working process to prevent its brittle failure or to make it easier to handle later.

Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum.

Outlet fittings are forged products with high strength and clear cost advantages over conventional pipe branching techniques.

Cu-Ni forged threaded fittings are usually supplied as redrawn tubes in the annealed condition. The combination of good ductility and strength provides excellent formability. In addition to this, these forged fittings are also resistant to rust, oxidation, pitting, stress cracking and crack stress.

A182 F91 Wrought alloy steel tubes, flanges, wrought fittings and valves and other components for high temperature use.

You source everything directly from manufacturers and shareholders! The average daily sales volume of stainless steel pipes in our inventory is about 40 tons. We believe in offering our clients substantial discounts and work closely with them on all their project requirements. We always offer the most competitive stainless steel 90 degree elbow prices to potential and existing customers.

This product is widely used because of its reliability, simple application and cost-effectiveness. They are used to provide smaller branches that form larger diameter running pipes. The socket is suitable for small diameter pipes with high pressure and high temperature.

Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and reliability. Suitable for various industrial applications such as vibration, high pressure or corrosive conditions. To improve sealing and reduce wear*, the manufacturer recommends using both Grey Stainless Steel PTFE Thread Sealing Tape and Welded White Seal Plus Multipurpose Fitting Compound.