With Up To 3000 Ton Capacity Proficient Of Cold Forming 8″ Nb SS 304 Fitting And ASTM A403 WP304 Elbow Upto 12″ Nb And Wall Thicknesses Upto 0.75″ Thick As Per Ansi/ Asme B16.9.
SS UNS S30400 Butt Weld Pipe Elbow execute excellent forming and welding properties.ASTM A403 WP304 Fittings covers the standard for created austenitic stainless steel fittings for pressure piping applications.
One of the major concerns about the SS 304 Fitting is its low cost compared to other high end alloy material counterparts.All A403 gr WP304 Buttweld Elbow and 304 Pipe Fittings should experience heat-treatment.
ASTM A105 Flange is a specification of flanges.carbon steel ASTM A105 Flange are made up of carbon steel or mild steel material.
Flanges are a type of connections for pipe lines to connect the pipes together.Our Carbon Steel A105 Slip On Flanges are meant for non-critical conditions, as they have a low Carbon content.
a105 blind flange is forged between 1,700¡ãF to and 2,200¡ãF, followed by quenching and tempering.
The material has carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium in its composition.There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type.
a105 lap joint flange slide directly over the pipe and are most commonly used with stub end fittings.
Since the other materials are less than 1% of the composition, these are called the carbon steels.carbon steel ASTM A105 Flange are made up of carbon steel or mild steel material. The material composition can have carbon, manganese, phosphorus, sulfur and iron in the composition.
ASTM A403 WP304 pipe fittings mean the pipe fittings which material is Wrought Austenitic Stainless grade A403 WP304,they are used for the pressure piping systems of moderate and high temperature services.
pipe is usually welded to the Lap Joint flange and it is free to rotate around the stub end. It is frequently used for applications that needs frequent dismantling.There are different types such as the SA105N Blind Flange which is used to close a pipe line.
ASTM A403 is the standard of pipe fittings material,it indicates the materials properties of different kinds of stainless steel,WP304 is one of the steel grade in this standard. 304 a kind of common stainless steel,it is widely used to make for the manufacture of equipment and parts which needs good comprehensive performance,corrosion resistance and formability.
There are different types of flanges based on the functionality such as the blind flange, slip on flange and orifice flange.ASTM A105 carbon steel can be forged at temperatures in the range of 2200 to 1700 F followed by quenching and tempering or normalizing.
ASTM A403 WP304 Fittings are buttweld fittings made for austenitic stainless steel applications with forged material.
The flanges also have good strength properties. There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type because it closes a connection and not expand it.
Stainless Steel A403 WP304 / 304L contains higher chromium and low carbon content.The SS 304 Pipe Fittings has different grades of austenitic steel alloys that could be used for different purposes.
ASTM A105 is the most generally utilized carbon steel material grade that used to manufacture forge piping components, for example, flange and forged fittings of small diameter piping.
The A403 WP304 Elbow could be easily connected, welded and fitted to air tight qualities.Our A403 WP304 material are High Resistance to Atmospheric Corrosion And Keep From Contamination To The Internal Fluids.
The Monel400 bar is a nickel-copper alloy (about 67% ni-23% Cu) that is resistant to seawater and steam as well as salt and corrosive solutions at high temperatures.
Alloy 400 is a solid solution of gold that can only be hardened by cold work. The nickel alloy has good corrosion resistance, good weldability and high strength
Monel 400 is a kind of corrosion resistant alloy with large dosage, wide use and excellent comprehensive performance. Monel 400 has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium.
Monel 400 has excellent corrosion resistance in hot concentrated alkaline solution. Monel 400 also resistant to corrosion of neutral solution, water, sea water, atmosphere and organic compounds.
One of the most important characteristics of Monel 400 is that stress corrosion cracks do not occur in general, and the cutting performance is good. The structure of Monel 400 is single phase solid solution with high strength.
Inconel X750 is a superalloy that has excellent properties enabling it to exhibit high strength at high temperatures, excellent corrosion resistance, and good oxidation resistance up to 1300¨H.
Inconel X750 is considered to be a popular and cost-effective nickel-chromium superalloy.The most notable characteristic X750 exhibits is its high strength in cryogenic temperatures making it essential to industries that make use of gas turbines, pressure vessels, and rocket engines.
Inconel X750 is an alloy that has a high resistance to corrosion and oxidation. Inconel X750 also resistant to creep deformation, which makes it suitable for use in high-temperature environments where other alloys would deform over time.
Inconel X750 Round Bar has a high strength-to-weight ratio, excellent formability and weldability, and good fatigue resistance.
Inconel X750 bar is a super alloy that is commonly used in the aerospace and nuclear industries. It has excellent corrosion resistance and good mechanical properties.
Inconel X750 is a nickel-chromium alloy that has been used for both wrought products and castings. Inconel X750 offers excellent resistance to corrosion and oxidation along with high strength and good toughness properties at elevated temperatures.
Hastelloy C-276 has excellent resistance to pitting as well.C276 alloy is suitable for many chemical process applications.
