round bar price 2205 bar round suppliers S32205 bar

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Super duplex steel flanges are very good for servicing a severe corrosive atmosphere like offshore and marine applications.

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

In duplex steels, the duplex microstructure has the high strength of ferritic grades while retaining the corrosion resistance of austenitic grades. It is not uncommon to use this metal as a practical solution to chloride-induced stress cracking, the Achilles heel of stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

The 2507 pipes could also be electric fusion welded. The Pipes Manufacturer comes under five different classes with each class having a special mechanical property setup. The electric resistant welded pipes are stronger and they could be used for extensive welding.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Additionally, Duplex 2205 is the most widely used duplex grade on the market. Duplex 2205 alloy is a nitrogen-enhanced duplex stainless steel alloy. The effect of nitrogen is to significantly increase the corrosion resistance of the alloy; especially in the as-welded condition.

Some of the advantages of using super duplex fasteners include its physical and excellent mechanical properties such as high yield strength, excellent tensile strength, high impact strength and excellent corrosion resistance.

Duplex stainless is a mixed microstructure of austenitic and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades with similar corrosion resistance qualities.

The duplex structure provides 2507 with exceptional resistance to pitting and chloride stress corrosion cracking.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The Duplex Steel Pipe gets its name from the dual nature present in the microstructure of the alloy. Duplex Stainless Steel Seamless Pipe have good mechanical characteristics and can be used in an as welded condition. Considered to be superior in comparison to austenitic alloys ASTM A312 TP304 or ASTM A312 TP316, the Seamless Duplex Pipe offers much better resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A182 F53 Flange is a high strength flange that has 550MPa minimum yield strength and 800MPa minimum tensile strength.

This provides the flanges with high corrosion resistance and higher mechanical properties. Please contact us for your orders of F53 flanges.

An austenitic-ferritic stainless variant with a higher stress corrosion cracking resistance in comparison to regular austenitic 304 and 316 stainless, but with a lower toughness and impact strength.

The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade.

It is alsohighly resistant to inorganic acids, especially if they contain chlorides.

La microestructura hibrida de la tuberia Super Duplex 2507 mejora su rendimiento.

Super Duplex UNS S32760 Round Rod has many properties and properties due to the elements present in the chemical composition. Due to these characteristics and properties, these super duplex UNS S32760 round bars are used in a large number of industrial applications.

Duplex stainless steels are Fe-Ni-Cr alloys consisting of ferritic-austenitic microstructure at room temperature. These steels generally possess beneficial combinations of the austenitic and ferritic phases. Duplex stainless steels exhibit greater toughness and better weldability than ferritic stainless steel (Nilsson, 1992). They have higher strength and better corrosion resistance than austenitic stainless steel (Atamert and King, 1992). Their good engineering performance has led to an increasing number of applications, mainly in corrosive environments such as sour gas pipelines and chemical reaction vessels.
Duplex stainless steels combine characteristics of the austenitic and ferritic family of alloys to offer benefits from both with fewer downsides — often at a lower cost than other steel alloys.
Duplex stainless steels have a combination of two phases, ferrite and austenite in approximately equal measure. This allows them to benefit from the advantages of both austenitic and ferritic stainless steels, leading to increased strength, improved weldability, higher toughness and resistance to several types of corrosion.

Some steels also contain the alloy elements such as Mo, Cu, Nb, Ti and N, etc. Compared with ferritic stainless, duplex stainless steel has higher plasticity, ductility and better intergranular corrosion resistance and weldability.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex2507 thread rod are dual phase austentic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel and molybdenum with restricted carbon content and minimum PREN42. SAF2507 thread rod have high strength, resistance to pitting, stress corrosioni cracking, erosion and corrosion fatigue, crevice corrosion resistance.

UNS S31803 Bolt is a threaded fastener with external threads. Generally, like screws, alloy S31803 bolts tend to use a variety of head designs.

Through additions of chromium, molybdenum and nitrogen localized corrosion such as pitting and crevice attack are improved. Alloy 2507 has excellent localized pitting resistance.

Super Duplex UNS S32750 bar has excellent resistance to stress corrosion cracking in chlorine containing environments. After heating to a solution treatment temperature of 1080¡ãC to 1120¡ãC, quenching is required.

The 2205 gasket is known as a duplex stainless steel gasket because it has a combination of ferrite and austenite and can be made into fasteners due to its high corrosion resistance. It has higher corrosion resistance than 316 stainless steel and is also highly resistant to stress corrosion and chloride cracking. 2205 has been determined to be cost effective because it is only 5% nickel and is significantly less expensive than Hastelloy C276 fasteners.

Preheating of UNS S32750 Super Duplex Fasteners is not necessary except to prevent condensation on cold metal.

UNS S31803/2205 is a dual-phase steel grade with a ferritic-austenitic microstructure. The alloy consists of approximately 40-50% ferrite in the annealed condition.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

Duplex pipes are stainless pipes containing the high amount of chromium and minimum amount of nickel. Duplex pipes provide great strength and resistance to corrosive environments. Duplex pipes are used in desalination plants, heat exchangers, and marine processes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

S32750 Seamless Pipes are chromium and molybdenum mixtures with high resistance to pitting. Many industries prefer these Seamless Pipes for their resistance to stress corrosion cracking and crevice corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flange a182 f53 can also differ in the face type as flat face, raised face and ring type joint flanges.