SB 366 UNS N06022 pipe bend ASTM B366 N06022 Buttweld Pipe Fittings

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

The low carbon minimizes carbide precipitation during welding to maintain resistance to intergranular attack in heat-affected zones of welded joints.

Hastelloy B2 Welded Pipes is a wrought nickel-molybdenum alloy that can be used in the ¡®as welded¡¯ condition.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These alloys can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required. They have high creep and oxidation resistance.

Hastelloy B2 fasteners are primarily used for excellent resistance to reducing environments such as hydrogen chloride gas, sulfuric acid, acetic acid and phosphoric acid. Like other Hastelloys, B2 fasteners can be used in the as-welded condition because they resist the formation of grain boundary carbide deposits in the weld heat-affected zone. Due to reduced ductility, B2 fasteners are not recommended for use between 1000¡ãF and 1600¡ãF.

Alloy C276 Coils are often used in Pollution control, chemical processing, Waste treatment, Marine engineering, Pulp and paper production, and more.

Hastelloy C276 grade round bars also have good corrosion resistance in seawater and brine solutions. They are also known for their resistance to localized corrosion such as stress-related corrosion cracking and pitting.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

Machining of Hastelloy UNS N10276 polished plates is best done in the annealed condition. Since this particular alloy grade is prone to work hardening, only low cutting speeds are required.

HastelloyB2 is a nickel-based wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. Therefore, it has strong resistance to stress corrosion cracking and pitting corrosion. It is also resistant to hydrogen chloride, sulfuric acid, acetic acid and phosphoric acid. Hastelloy B-2 is a grade of Hastelloy?, a nickel-molybdenum alloy. There are many different grades of Hastelloy?, including B-2. Hastelloy? grades are optimized for specific applications. molybdenum

Hastelloy G30 Hastelloy alloys exhibit better resistance to commercial phosphoric acid than other nickel or iron based alloys. Its application as an acid evaporator in the fertilizer industry is increasing day by day.

The greatest advantage of Hastelloy B3 bolts compared to B-2 alloys is their ability to maintain excellent ductility during transient exposure to intermediate temperatures.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

Hastelloy B3 Flanges has great resistance to cutter line, and heat affected zone attack.

Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it.

Nickel alloys provide high resistance to a wide variety of corrosive agents, oxidation and excellent performance at high temperatures.Certain Nickel Alloys are better for high temperature applications, while others do a better job with corrosion resistance.

Alloy C276 (UNS N10276) is an austenitic nickel-molybdenumchromium alloy with a small addition
of tungsten.Hastelloy C-276 Alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.

There are different types such as the Hastelloy B2 Slip On Flanges , socket weld flanges, and welded neck flanges. These have 790MPa minimum tensile strength, 355MPa minimum yield strength and 40% elongation rate.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

Hastelloy is a corrosion-resistant nickel alloy that contains other chemical elements such as chromium and molybdenum. This material has high temperature resistance and exceptional corrosion resistance. Hastelloy C276 is one of the grades of Hastelloy used in the oil and gas industry.Hastelloy nickel alloys are fully resistant to a vast array of chemicals, including highly acidic hydrochloric and sulfuric acids. It is also one of the few materials available that can withstand wet chlorine gas, chlorine dioxide and hypochlorite.

This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

Hastelloy is a corrosion-resistant nickel alloy that contains other chemical elements such as chromium and molybdenum. This material has high temperature resistance and excellent corrosion resistance. Hastelloy C276 is one of the Hastelloy grades used in the oil and gas industry.

Hastelloy B3 Threaded Flange (UNS N10675) has great resistance to knife ¨C line and heat ¨C affected zone attack. Hastelloy B3 Slip On Flange has a special chemistry designed to achieve greater thermal stability than B-2 alloy, resulting in easier fabrication. Hastelloy B3 Spectacle Blind Flanges have good creep and oxidation resistance.

The Hastelloy C276 round tube is manufactured from a high temperature heat resistant alloy, which contributes to its widespread use in the power industry. Whereas, Hastelloy C276 pipe exhibits outstanding properties such as high wear resistance, corrosion resistance and longer service life due to the raw materials used in its processing.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

It can be used in flue gas desulfurization systems due to its excellent resistance to sulfur compounds and chloride ions in most scrubbers.

Hastelloy C-276 resists the formation of grain boundary deposits in the weld heat affected zone, making it a candidate material for most chemical and petrochemical processing applications in the as-welded state. The alloy resists general and localized corrosion, including pitting, crevice corrosion and stress corrosion cracking.

The high content of chromium offers good resistance to oxidizing media while the molybdenum and tungsten content in the Hastelloy B3 Pipe Flanges provides the alloy with good resistance to corrosion in reducing media.

Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to which the austenitic stainless steels are prone).