special-shaped flange A182 F11 flange the ends of the piping system

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

When the F11 flange is heat treated, the alloy steel F22 flange is formed. These flanges have a tensile strength of 655 MPa and a yield strength of 517 MPa.

A blind flange is a solid flange as shown below. The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used.

These are flanges with creep strength and high resistance; therefore, steel threaded flanges help them work in the petrochemical industry.

SA12 F11 Flange is made up of by using supreme raw material and they give excellent performance even in toughest environment. The weight chart of this is also available and based on this the product is manufactured.

The alloying elements of A335 also impart higher corrosion resistance to the steel pipe. This also makes it the first choice for chemical companies.

B16.11 Forged Fittings, Socket-Welding and Threaded ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

In case pipeline maintenance, we can remove screws on the flange, take away corresponding pipes or valves. Meanwhile to replace new pipes and valves.

HASTELLOY C-276 alloy is available in the form of plates, sheets, strips, billets, bars,
wires, pipes, tubes, and covered electrodes.

Its tensile strength is 380 Mpa, while its yield strength is 585 Mpa at 0.2% Offset. The elongation of astm a182 gr f9 is 20 %.

A320 Gr L7 studs are subject to certain mandatory mechanical tests, namely: tensile test, impact test and hardness test.

Chrome moly alloy flanges connect pipes, valves, pumps and other equipment, forming a piping system.

After hot working, forgings should be cooled to a temperature below 1000¡ãF (538¡ãC) prior to heat treatment in accordance with ASTM A182. Low alloy steels and ferritic and martensitic stainless steels shall be heat treated in accordance with ASTM A182.

Monel 400? has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.We make use of the best manufacturing techniques for their production so that the final product being served to the customers is the best of best.

A335 grade p11 pipe is a seamless ferritic alloy based stainless steel pipe. The tube is a chrome molybdenum alloy. The presence of these two elements in the SA335 p11 pipe increases its mechanical properties.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

The A335 p12 material composition includes carbon up to 0.05 ¨C 0.15, manganese up to 0.30 ¨C 0.61, sulfur and phosphorus up to 0.025, silicon up to 0.5, chromium 0.80-1.25 and molybdenum up to 0.44-0.65. This steel shall meet the specified chemical composition, tensile properties and hardness requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

The Alloy Steel Weld Neck Flange has a welded neck onto it that holds larger pipes in place for easy welding and installation.

Standard ASTM A193 B7 fasteners typically have a common bare metal finish. However, ASTM A193 Grade B7 studs can be galvanized, hot-dip galvanized, xylan coated, teflon coated if requested by the buyer. Coating ASTM A193 B7 fasteners can help improve the corrosion resistance of fasteners. This ASTM A193 Grade B7m bolt is typically used to fasten medium high temperature service materials. These bolts are liquid quenched from 50¡ãF to 900¡ãF and they can be air quenched from -40¡ãF to 900¡ãF.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Steel pipes are used in structures, transportation, and manufacturing. They are sized according to their outer diameter, with the inner diameter varying based on wall thickness. Some applications need thicker walls than others, depending on the forces the pipe must manage.

A182 grade is an excellent alloy that is hardened only by cold work. Commonly used in nuclear energy, medical equipment, chemical energy, etc.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

SA182 F1 forged flanges are used as connecting parts to create piping networks for cylinders, valves, pumps and other equipment. Combine two different parts of the machine. To make the structure stronger, it should be an attachment to the frame.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service.

Each tube of the A335 shall be hydrostatically tested. In addition, each tube shall be inspected using non-destructive testing methods in accordance with prescribed practices.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

ASTM A193 Grade B7 bolts are considered for applications up to 450¡ãC due to heat treated chrome molybdenum steel. B7 stud bolts are bolts with male threads and a hex head designed to be actuated by a wrench. It can be fully threaded or partially threaded and is supplied with a hex cap.

ASTM A182 is the Standard Specification for Forged Stainless Steel Pipe Flanges and Stainless Steel Forged Fittings.

Alloy steel UNS K12822 round bars are widely used in numerous industries for the manufacture of different kinds of components. We provide a full range of alloy steel 15Mo3 round bars which are widely used in engineering, construction and other industries.

The achievable mechanical properties depend on added elements such as nickel, chromium, molybdenum and vanadium. The following are a series of improved properties of alloy steel (compared to carbon steel): strength, hardness, toughness, wear resistance, corrosion resistance, hardenability and hot hardness. To achieve some of these improved properties, the metal may require heat treatment.

The thickness and the inner diameter of the flange will be as per the size of the pipe for which this welding neck flange is being made.