904L pipe with pipe fittings

Their Inconel surface becomes corrosion resistant due to the formation of patina. Incoloy material has a higher iron content and is less expensive than Inconel products. They are also resistant to corrosion from a variety of materials, including steam and acids. These materials are resistant to seawater, acid gas and saltwater environments.

Light gauge steel framing is an integral part of modular construction as it is strong, lightweight, durable, accurate, free from long-term movement and is well proven in a wide range of applications.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength.

HastelloyB2 is a nickel-based wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. Therefore, it has strong resistance to stress corrosion cracking and pitting corrosion. It is also resistant to hydrogen chloride, sulfuric acid, acetic acid and phosphoric acid. Hastelloy B-2 is a grade of Hastelloy?, a nickel-molybdenum alloy. There are many different grades of Hastelloy?, including B-2. Hastelloy? grades are optimized for specific applications. molybdenum

304 stainless steel is the most common form of stainless steel in the world due to its excellent corrosion resistance and value. It contains 16% to 24% chromium and up to 35% nickel, as well as small amounts of carbon and manganese.

Hastelloy C276 is known for its excellent corrosion resistance in a variety of corrosive media. It includes chloride ions, sulfur compounds, etc. In addition, this alloy has excellent resistance to crevice corrosion, pitting corrosion and stress corrosion cracking. It helps resist the corrosive effects of wet chlorine, chlorine dioxide and hypochlorite. This product is ideal for seawater applications.

In nuclear reactors uses are for such components as control rod inlet stub tubes, reactor vessel components and seals, steam dryers and d separators in boiling water reactors.

We manufacture piping products as well. When customers need different elements be fitted together before installation, the application of fabricated elements together is called the piping spool applications. There are Stainless Steel Pipe Spools products as well other material made spools in used.

Customized Prefabrication Pipe Spools

Pipe welded with Flanges

Pipe welded with Fittings

Flanges welded with Fittings

The versatility of INCONEL 600 alloy allows it to be used in a variety of applications involving temperatures ranging from cryogenic temperatures to over 2000¡ãF (1095¡ãC).

This alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble columns, and condensers for fatty acid processing; evaporator tubes, tube sheets, and sheeting trays for the manufacture of sodium sulfide; and equipment for processing abietic acid in pulp production.

Inconel 718 consists primarily of nickel (52%). Alloying elements include iron (19%), chromium (18%), niobium + tantalum (5%), molybdenum (3%), titanium (0.9%), aluminum (0.5%), in addition to other trace elements such as Baron, Cobalt, Copper, Manganese and Silicon.

It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel 300 series.

The socket welded tees also make a perpendicular angle between the connected lines. They used for high-pressure applications. In opposition to the butt welded tees, the socket welded tees are utilized in applications where the radius of the pipes are generally smaller. The socket welded tees do not require the beveling process before welding. Therefore, these types of tees are favorable in some applications where branch ends must be kept in the same form before and after the welding.

It cannot be hardened by heat treatment;?however?the material will harden due to cold working.

The butt welded tees can maintain a straight flow or reducing flow which depends on the ordered pipeline system. The reducing branches (reducing tees) make a perpendicular connection with the mainline. The radiuses of the tees are usually smaller than the main flow line. The radiuses of the straight tees are produced in a way that has similar radiuses with the main flow line.

Alloy 317L is non-magnetic in the annealed condition.

Steel Pipe Spools are also referred as prefabricated components of a piping system such as pipes, flanges and pipe fittings, and they are mounted during the development before sending them to the manufacture.

Inconel 625 material has excellent strength and hardness. They have a minimum tensile strength of 120Ksi and a minimum yield strength of 60ksi. In addition to that, they can easily be stretched up to 30% and still have excellent workability.

For service requiring optimum creep and rupture properties, Incoloy 800H or 800 HT are used. The high contents of nickel and chromium in the alloys also give good corrosion resistance.

This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength.

Hastelloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good machinability. The alloy should be considered for use in environments requiring resistance to thermally contaminated inorganic acids, organic and inorganic chloride-contaminated media, chlorine, formic and acetic acids, acetic acid, acetic anhydride, seawater and brine solutions.

Alloy 600 / Inconel 600 is a combination of nickel chromium and iron that provides the standard material for the chemical industry and the automotive engine, aero engine and airframe sectors. Controlled chemical composition is restricted for use in the nuclear industry to eliminate the risk of stress corrosion cracking in high-purity water containing chloride ions.

The alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

The tees are also used for the change of the flow angle and distribution of the flowing matter either into one or more channels. Tees can be divided into two main groups which are the butt welded tees and the socket welded tees. The butt welded tees are utilized to perform a perpendicular distribution of the flow. They make 90¡ã branches with the connection of the pipeline and distribute the coming matter from the mainline.

Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content. At high temperatures, it has resistance to oxidation, carburization and vulcanization as well as fracture and creep strength.

With the addition of nitrogen as a strengthening agent, the alloy can be dual certified as Alloy 317 (UNS S31700).

For the supply of water and flammable gases, steel pipes are the most useful pipes. They are used in many homes and businesses to transfer natural gas or propane fuel. They also used for fire sprinkler systems due to their high heat resistance.

Virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.

625 has almost complete freedom from chloride induced stress corrosion cracking.

316 can be annealed to resist weld decay.