alloy railing flange A182 F11 plate flange

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

B7 and B7M shall be heat treated by quenching in a liquid medium and tempering. For B7M fasteners, the final heat treatment, which may be the tempering operation if conducted at 1150 ¡ãF [620 ¡ãC] minimum, shall be done after all machining and forming operations, including thread rolling and any type of cutting.

Chrome molybdenum grades P11, P22, P91 and P92 are used in the power industry. Chromium molybdenum grades P5 and P9 are used in petrochemical refining processes. Chrome molybdenum forged fittings and flanges are available in grades F5, F9, F11, F22, F91, F92. Chrome-molybdenum alloy butt welded pipe fittings are available in WP5, WP9, WP11, WP22, WP91, WP92 grades. F11 and F22 materials comply with NACE-MRO 175.

Low alloy steel ASTM A182 F11 flanges typically have a total alloy content of 1.5% – 5%. Its common alloying elements are manganese, chromium, silicon, nickel, molybdenum and vanadium. It may contain up to four or five different quantities of these alloys. At the same time, the increased strength of the alloy steel F11 flange may require higher forming pressures. Annealing of SA 182 Gr F11 steel flanges is accomplished by water quenching by thorough immersion at 1725¡ãF – 1850¡ãF (941¡ãC – 1010¡ãC) and can only be hardened by cold work.

The ASTM A320 specification, originally approved in 1948, covers alloy steel and stainless steel bolting materials for low temperature service.

WPHY 52 Pipe fittings are manufactured as per MSS SP 75 shall be furnished in the heat treated condition.We offer a wide assortment of ASTM A860 WPHY 52 Fittings that cater to the prerequisite of different industries such as engineering, chemical, refineries, machine apparatuses, and numerous others.

Alloy Steel Flange Material can differ according to its chemical composition. Low Alloy Steel Flanges are widely used for automotive and aerospace bodies, offshore and onshore structural engineering plates and railway lines.

A182 Class F1 Socket Weld Flanges were originally developed for small high pressure pipelines. They have the same static strength as slip-on flanges, but have 50% higher fatigue strength than double-welded slip-on flanges.

This specification covers forged low alloy flanges for use in pressure systems manufactured to specified dimensions or industry standard dimensional specifications.

Alloy steel pipe has a hollow section and is widely used as a pipeline for transporting fluids, such as oil, natural gas, gas, water and some solid materials. Compared with solid steel such as round steel, alloy steel pipe is lighter in weight with the same bending and torsional strength.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Users of SA182 Chrome Moly Gr.f9 forged bar do not rely solely on external coatings or finishes.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

It exhibits exceptional corrosion resistance in chemical environments containing phosphoric acid, nitric acid, chlorides and sulfuric acid. It also has good mechanical properties at both ambient and elevated temperatures.

For A335, chromium is a key ingredient used to make stainless steel. If the chromium content is above 12%, it can be classified as stainless steel. Even at high temperatures, the antioxidant potential of chromium is irreplaceable. Better hardness, tensile strength and yield strength at standard temperature. Due to the material’s composition, it is ideal for use in power plants, refineries, petrochemical plants and other oilfield services involving high temperature and high pressure transportation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P108

The term “bolting material” as used in this specification covers, rolled, forged or strain hardened bars, bolts, washers, screws, studs and stud bolts.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Due to the chemical composition of Molybdenum (Mo) and Chromium (Cr), A335 is often referred to as Chromium Molybdenum Tube. Molybdenum increases the strength of the steel as well as the elastic limit, wear resistance, impact quality and hardenability. Molybdenum increases resistance to softening, inhibits grain growth, and makes chromium steel less susceptible to embrittlement. Molybdenum is the most effective single additive for improving high temperature creep strength. It also enhances the corrosion resistance of the steel and inhibits pitting corrosion. Chromium (or chrome) is the basic component of stainless steel. Any steel with 12% or more chromium is considered stainless steel. Chromium is almost irreplaceable in terms of resistance to oxidation at high temperatures. Chromium increases tensile, yield and hardness at room temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P99

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

In case pipeline maintenance, we can remove screws on the flange, take away corresponding pipes or valves. Meanwhile to replace new pipes and valves.

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ? inches through 48 inches of nominal diameter sizes of flanges.

These ASTM A182 Alloy Steel F12 Flanges are manufactured from high quality raw materials, so the manufactured products are of high quality. Additionally, these ASTM A182 Alloy Steel F12 Flanges are manufactured with the necessary standards, codes and guidelines in mind, resulting in a high quality product.

It is available in materials of ASTM A 182, and ASTM A 105. The flanges are available in various grades like ASME B16 47 ¡®A¡¯ Series, and ¡®B¡¯ Series to suit the needs of the clients and the industry.

Alloy steel pipes are common in applications involving automobiles, kitchenware, and industrial equipment. Typically, superalloy steel boiler tubes are used in applications with ambient temperatures exceeding 500¡ãC. For example, hollow and thin-walled alloy steel drill pipes must be able to resist pressure differences that manifest between the inside and the outside of these alloy steel seamless pipes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

ASTM A320 Class L7 fasteners are manufactured using high strength materials ideal for the manufacture of fastener product bolts, studs and bolts that can be used in a wide range of high temperatures in bolting applications.

Alloy steel seamless pipes are used in applications that require high precision for ease of installation and accuracy of operation and application. Different types are used for different mechanical benefits. Most applications require a lot of welding, so welding alloy steel pipes is good for them. Some are low in strength but high in corrosion resistance, and some are also high in strength. We offer high strength low alloy steel pipes in various grades and sizes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.63

HastelloyC-276 (Hastelloy) is a tungsten-nickel-chromium-molybdenum alloy with extremely low silicon-carbon content and is considered to be an all-around corrosion-resistant aluminum alloy. The key moisture-resistant chlorine, various air-oxidizing fluorides, isopropyl titanate solutions, hydrochloric acid and air-oxidizing salts, have good corrosion resistance in ultra-low temperature and standing temperature sulfuric acid. Therefore, in the past 30 years, it has been widely used in extremely corrosive natural environments such as chemical plants, petrochemicals, flue gas desulfurization, pulp and paper industry, and environmental protection.

Corrosion resistance

The aluminum alloy has the following characteristics: 1. It has good corrosion resistance to most corrosive substances under the two conditions of air oxidation and repair. ¢ÚIt has good resistance to pitting corrosion, void corrosion and intergranular corrosion. The higher content of Mo and Cr makes the aluminum alloy resistant to corrosion by chloride ion content, and the W element further improves the corrosion resistance. At the same time, Hastelloy C-276 aluminum alloy is one of the only types of raw materials that are resistant to wet chlorine, hypochlorite and chlorine dioxide saturated solutions. Ester solution has obvious corrosion resistance. It is one of the very few raw materials that can be used as a hot sulfuric acid saturated solution.

Chromium (or chromium) in A335 is an essential element in stainless steel production. Steel products are defined as stainless steels with 12% or more chromium added. Chromium is widely used due to its excellent heat resistance properties and is irreplaceable in terms of resistance to oxidation in high temperature applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P96

Compared to other manufacturing process, ASTM A182 F22 Metal forging is mainly focused on producing some of the strongest manufactured parts. It¡¯s not just limited to iron and steel forging but as well as other metals also.

Seamless steel tubes in ASTM A333, reheated and controlled at temperatures for hot working and hot finishing operations to finishing temperatures ranging from 845 to 945¡ãC [1550 to 1750¡ãF] and cooled in air or in air. Controlled atmosphere furnaces from initial temperature over 845¡ãC [1550¡ãF]. For ASTM A333 Grades 1, 6, and 10 Seamless Steel Pipe, heat treatment can be performed from a uniform temperature in excess of 815¡ãC [1500¡ãF], then quenched in liquid and reheated to the appropriate tempering temperature, this heat treatment ASTM A333 4.3.1 The above treatment scheme can also be replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

The carbon form can be iron carbide or Alloy Steel F9 Weld Neck Flanges can be carbide of an alloying component, for example, titanium. The A182 F9 Steel Slip On Flanges are good for use with seamless pipes because the flanges allow for the pipes to slip onto them for precise location for the connection.

The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.