Astm A182 316Ti 1.4571 Bs Pn16 Blind Spect Forged Drawing Butt Welding Ring Loose Flange

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

The 304, 316 and 316L stainless steel formulations are austenitic, a term used to classify the crystal structure of the steel. The structure is achieved by heat treating at very high temperatures followed by quenching ¨C a rapid cooling process that locks the structural features in place. Austenitic formulations are stronger than martensitic or ferritic steels. Ferritic steels are magnetic, have low carbon content, and have poor corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.73

SS 316/316L flanges can be fabricated from ASTM A182 F316 or F316L forgings, ASTM A351 CF8M or CF3M castings, and ASTM A240 316 or 316L plates per ASME B16.5 and ASME B16.47.

With Up To 3000 Ton Capacity Proficient Of Cold Forming 8″ Nb SS 304 Fitting And ASTM A403 WP304 Elbow Upto 12″ Nb And Wall Thicknesses Upto 0.75″ Thick As Per Ansi/ Asme B16.9.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless steel 904L / 1.4539 material can be used to make hot and cold rolled sheet and strip, semi-finished products, bars, rolled wire and profiles, as well as seamless and welded pipes for pressure applications.

S32154 can be easily welded to other common austenitic stainless steels.

A276 specification 310S bar stock to manufacture stainless steel 310S bolts, nuts, screws, studs, threaded rods, other fasteners and bar stock assemblies for general engineering purposes. Each of the approximately 20 elements of a stainless steel 310S hex bolt has a significant effect on the microstructure as well as the temperature, hold time and cooling rate of the microstructure change.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

AL-6XN is an upgrade to 300 series alloys such as 316L/1.4435 and 304 when high concentration of chlorides, high temperature, acidic pH levels, and time of contact are introduced to the process.

After tension testing and three-dimensional vibration test, the tearing of the sewn stainless steel pipe occurs almost far away from the welding point or the heated area. This is because the weld less impurities and nitrogen content is slightly higher, so the strength of the weld better than other parts.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Stainless steel 310 sheet is a medium carbon austenitic stainless steel, for heat applications such as furnace parts and hotness procedure tools.

Another industry that uses this alloy is the food and beverage industry, which uses acetic acid as a preservative. Acetic acid is an organic acid that is corrosive to carbon steel.

304L is a variant of 304 stainless steel with a lower carbon content and is used where welding is required. The lower carbon content minimizes carbide precipitation in the heat-affected zone near the weld, which can lead to intergranular corrosion (welding corrosion) of stainless steel in some environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

Grade SMO 254 Long Weld Neck Flanges are thermally stable and possess moderate strength even when the temperature is high. SMO 254 Threaded Flanges whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion, and cracking.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Stainless steel grade 254 SMO? is a very high end austenitic stainless steel.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

HT PIPE is one of the largest and most renowned manufacturing and stockholding company in India, supplying stainless steel 316L tubing as well as stainless steel 316L tube fittings and stainless steel 316L flanges.

These alloys have excellent formation as well as welding properties. Apart from that, they are easy to clean and fabricate. The 304 Stainless Steel Tube is designed with a yield strength of up to 250,000 psi. They are widely used in the food industry, transportation of liquids and gases.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

While 300 series stainless steels are very popular, they are not universally suitable for all process piping applications. For example, even though they are corrosion resistant, 300 series formulations do not perform well in the presence of chlorides. In these cases, steels with much higher alloy contents such as molybdenum, chromium and nickel are preferred.

The alloy has excellent resistance to intergranular corrosion in the as-welded condition.

This A Grade 70 or 316 is one of the top corrosion resistant fasteners. For use in marine and harsher environments such as sewage treatment plants. No matter what stainless steel fasteners you need and their application, we are sure to have them in stock to meet your needs and requirements in terms of functionality and price.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

SS UNS S34700 Pipe Flanges
Featuring 347 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

ASTM A182 Flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

Type 304L stainless steel is a material used in severely corrosive conditions. Weld annealing is only required in applications with excessive stress loading. This steel grade exists in various commercial fields, especially in the chemical industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

Stainless Steel B366 WP904L contains higher chromium and low carbon content.Our SS 904L Elbow have resistance to atmospheric corrosion and serve general purposes like sealing pipe ends and preventing any contamination to the internal fluids.

Greater strength and corrosion resistance still mandate the use of seamless stainless steel and nickel alloy tubing for high pressure applications within the oil and gas, petrochemical, chemical, energy, and pulp and paper industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20