ASTM A182 Duplex Stainless Steel Flanges for oil and gas and other high performing piping systems

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

S32760 was originally developed as a seawater resistant material for pump applications in the North Sea.

ASTM A479 Duplex Stainless Steel 1.4462 Punched Washers has resistance to SCC that is of prominence in a lot of applications counting hot water tanks, brewing tanks, desalination plant and process plant. Accordingly, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers shows properties of both ferritic and austenitic alloys. Microstructures of ASME SA 479 Duplex Steel UNS S32205 Flat Washers include a combination of ferrite and austenite stages. ASTM A479 Duplex Steel UNS S31803 Washershas outstanding general corrosion resistance in a widespread range of corrosive chemicals containing industrial and seawater acids.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

2507 Duplex is highly resistant to uniform corrosion by organic acids such as formic and acetic acid.

Super Duplex 2507 Equal tees are the most common fittings.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Grade UNS S31803 is termed as a duplex class due to its mixed Austenitic-ferritic microstructure. Duplex stainless steel alloys have an equal proportion of both austenite and ferrite, which is why Duplex Steel Fittings exhibit properties prominent to both classes.

Super Duplex UNS S32760 is one of the most common super duplex grades on the market. UNS S32760 is a duplex stainless steel designed for use in corrosive chlorine-containing environments, with the addition of W and Cu compared to UNS S32750.

The Duplex Steel Pipe gets its name from the dual nature present in the microstructure of the alloy. Duplex Stainless Steel Seamless Pipe have good mechanical characteristics and can be used in an as welded condition. Considered to be superior in comparison to austenitic alloys ASTM A312 TP304 or ASTM A312 TP316, the Seamless Duplex Pipe offers much better resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The strength, factorially speaking of an ASTM A790 UNS S31803 Seamless Pipe, is two times higher than that of either of the two stainless steel classes. And the toughness and ductility of the Sa 790 UNS S32205 Welded Pipe are better in comparison to ferritic steels.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

Duplex stainless steels are approximately 50% ferrite and 50% austenite for optimum strength and corrosion resistance.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

The flanges shall not be used at temperatures over 600¡ãF [315¡ãC] since it may be subject to embrittlement after service at moderately elevated temperatures.

The microstructure and composition of the duplex 2205 alloy provides corrosion resistance superior to Type 316 or 317 in many environments, and its minimum yield strength is more than double that of conventional austenitic stainless steels.

The applications include high corrosive applications including acidic applications due to the material composition.

It is also exceptionally resistance to chloride SCC. Flanges are supplied with pitting resistance equivalent that is assuring very good pitting corrosion resistance.

The duplex microstructure gives this grade high strength UNS S32750 a low coefficient of thermal expansion and higher heat conductivity than austenitic steels and is suitable for working temperatures up to 300¡ãC.

ASTM A240 UNS S32750 sheet is a type of steel known as super duplex steel.

Super Duplex 2507 stud bolts (EN 1.4410) are made of a stainless steel alloy containing 25% chromium, 4% molybdenum, and 7% nickel. Duplex 2507 is known for its high strength and excellent localized corrosion resistance to chloride.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Super Duplex Steel 1.4410 Flanges are having low alloying costs as compared to the similar ferritic and austenitic grade along with resistant to corrosion in the chloride-containing atmosphere because of well-enhanced yielding and tensile strength.

ASTM A479 Duplex Stainless Steel 1.4462 Punched Gaskets are SCC resistant which is prominent in many applications such as hot water tanks, brewing tanks, desalination plants and processing plants. Therefore, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers exhibit the properties of ferritic and austenitic alloys.

Stainless steel grade UNS S31803 is highly resistant to intergranular corrosion due to its low carbon content, which prevents carbide precipitation at grain boundaries.

It has the nominal composition of 22Cr-5Ni-3Mo-N with P number 10H.

Duplex steels have the best resistance to pitting corrosion. This steel has effective fatigue strength to resist corrosion of the steel. The steel can be used in a wide range of heating temperatures in the industry.

Duplex bolts S31803 are widely used in several industries due to the enhanced strength transferred from the structural austenitic portion. In contrast, the ferritic fraction instills superior toughness from the transport of the fine structure. UNS S31803 Fasteners with excellent mechanical properties can become a buyer’s favorite by pre-reducing the cross-section of the final product, thereby reducing the overall weight, thus lowering the overall price.

The duplex steels are one type of stainless steels that have ferritic and austenitic phases in their metallurgic microstructure.

The yield strength is also higher, allowing component designers to reduce section size for load-bearing applications.

Our Duplex Steel S31803 bar is an industrially processed nitrogen-modified steel that addresses common corrosion problems encountered with 300 series stainless steels.