ASTM A182 F5 F9 F11 F12 F22 F91 Flanges Low Alloy Steel Flanges

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

The Welding neck flanges are available across various materials. These materials will have to be as per the Standards set. The materials also should be as per the quality specified by the ASTM or ASME standards.

Our alloy steel blind flanges are mainly caused by environmental factors such as wind exposure, man-made pollution and high temperature, and are more serious near the ocean, which is the main cause of seawater pollution.

Grade B7 is a heat-treated chromium-molybdenum low-alloy steel with minimum tensile strength requirement of 125 ksi (860 Mpa), yield 105 ksi (720 Mpa), and maximum hardness of 35HRC.

Flanges belonging to ASTM specification are subdivided into various grades that define the properties inherited by these flanges. Also,The ASTM A182 F9 Flanges are having higher versatility degree. The flange is thinner in size and easily fits into compact work spaces and is economical as compared to various other flanges.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

ASTM A335 grade P91 tubing contains small amounts of other alloys such as aluminum, niobium, nickel, nitrogen, titanium, vanadium, and zirconium. These pipes are based on the A335 standard, but when forged or drilled, the pipes can also meet the A369 standard. These pipes have a minimum yield strength of 415 MPA and a minimum tensile strength of 585 MPA.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

ASME SA 335 grade P22 alloy steel pipe can withstand high pressure and high temperature. Therefore, ASTM A335 P22 pipe is used in applications that need to operate at high pressure and high temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

ASTM A182 Alloy Steel F22 Fittings are available in a variety of shapes, sizes and dimensions according to the needs or requirements of the application or to customer supplied specifications.

These a335 p10 pipes are great for a variety of purposes, whether you want to use them for oil or water injection activities, or even use these a335 p10 pipes for drainage. These a335 p10 pipes are made of solid metal for lifetime durability and are manufactured using techniques that involve either hot rolling or cold drawing. They can withstand high impact and are compression resistant.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

It is the addition of other elements that make alloy steel stronger. Heat-treated elements such as silicon and manganese give alloy steels improved properties and additional benefits, such as increased corrosion resistance or improved weldability.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

These continuous ¨C annealing furnaces in Alloy Steel Grade F12 RTJ Flanges are usually heated by gas ¨C fired radiation tubes in order to separate combustion gases from the inert atmosphere surrounding the strip. Alloy Steel F12 Flanges has applications in many industries such as petrochemical, oil and gas, bulk liquid transportation, pharmaceuticals, chemical, pulp and paper manufacturing, power generation, textiles and others.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

These flanges are available in different types such as slip flanges, blind flanges, butt weld flanges, socket weld flanges, orifice flanges, eyeglass blind flanges, threaded/threaded flanges, reducer flanges, ring flanges Type joint flange (RTJ), etc.

These pipes are supplied with ASTM A182 F11 flanges for the mining, construction and aerospace industries, giving them resistance to sensation, and they also give you maximum strength. They are also made from the highest quality raw materials.

ASTM A194 2H Heavy Duty Hex Bolts are the core product and are in stock. HT PIPE is a leading supplier of ASTM A194 2H Heavy Duty Hex Nuts. These are heavy duty hex nut type bolts as directed by ASTM A-193 specification.

Chromium-molybdenum alloy flanges connect pipes, valves, pumps and other equipment to form a piping system. They are ideal for applications that convey corrosive or high temperature fluids or gases.

We offer a wide range of ASTM A335 P9 alloy steel seamless pipes using high quality raw materials. These alloy steel P9 ERW tubes are forged between 2250¡ãF/1750¡ãF (1230¡ãC/955¡ãC) for 30 minutes per inch of billet or ingot section thickness. These are A335 P9 pipes manufactured to international quality standards. These alloy steel P9 seamless pipes are also available in different sizes, grades, thicknesses and specifications according to customer requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P141

With an industry-leading inventory of chrome moly alloy from leading manufacturers combined with a diverse set of secondary service capabilities, our team can supply flanges that will meet or exceed your critical project/plant specifications.

A335 grade P5c pipe is a low alloy carbon steel (Cr-Mo) self-quenching in air where high hardness and residual stress are required for welding and it is not recommended for direct use in services requiring critical conditions. This situation requires the application of post weld heat treatment (PWHT). If you want to avoid PWHT then you can use preheat (120¡ãC) when soldering A335 grade P5c tubes. PWHT is required if the thickness of ASTM A335/ASME SA335 P5c alloy steel pipe is greater than 13 mm.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P149

ASTM A333 is a standard specification for seamless and welded carbon and alloy steel pipes for low temperature service or other applications requiring notch toughness. This standard covers several grades of ferritic steels: Grade, Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10 and Grade 11. Metals-Piping offers welding processes by seamless or no filler metal added in the welding operation, but Grade 4 shall be manufactured by seamless processes only. Pipes should be free of welding repairs, either by radiographic or ultrasonic testing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P146

Monel 400? is a nickel-copper alloy that is hardened by cold working only. The various types of available fittings are Monel Stub end, Monel Reducer, Monel End Cap Fittings, Monel tee, etc.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

ASTM A335 P91 Seamless Pipe is one of the seamless pipes that standardize A335 in various industries. ASME SA 335 Grade P91 Alloy Steel Pipe is made of chrome molybdenum alloy. These pipes contain 1% molybdenum, 9% chromium and nickel, manganese, silicon and carbon. ASTM A335 P91 pipe has very high tensile strength, yield strength, impact cracking resistance, corrosion cracking resistance and oxidation resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

Although acceptable fouling levels are considered beneficial to the alloy, in moderate cases, fouling deposits on Astm A182 F9 flange surfaces can act as a barrier to excessive corrosion. When flanges are produced using specification ASTM A182, they work well at high temperatures, albeit in applications with high pressure.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength. Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

Alloy round steel has high chromium content, which is beneficial to wet corrosion resistance, as well as improving its high temperature strength and high temperature scaling resistance.

ASTM A182 F11 class 1 Flange is the method of connecting two pipes, pumps and valves. This consists of chromium molybdenum based alloy steel grade.

Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de aerated acid.

ASTM A193 Grade B7 bolts are made of chrome-molybdenum material with high tensile strength and good elongation properties.