astm a182 wn so bl sw welded neck alloy steel flange F5 F9 F11 F12 F22 F91 1.7338 1.7335 1.7380

We are a manufacturer, supplier and exporter of Plate Flanges, which are accepted by major industries as a cost-efficient alternative to other types of flanges whose cost increases due to its expensive production pattern.

We are Leading Manufacturers of Alloy Steel ASTM A182 F22 Flange & have huge stock of Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500# & Class 2500.

ASTM A182 F11 Type 1 flanges are a method of connecting two pipes, pumps and valves. This consists of chrome molybdenum based alloy steel grades. This is used to make pipes, boilers and superheaters. It is used and comes in various other sizes and shapes in many other applications.

A flange is a device used to connect pipes, valves and pumps in a piping system. 254 SMO Flange Made of high concentrations of chromium, nickel and molybdenum. This gives these flanges excellent corrosion and oxidation resistance in a wide variety of media. They range in size from 1/8 NB to 24 NB.

These flanges are available in different types such as slip flanges, blind flanges, butt weld flanges, socket weld flanges, orifice flanges, eyeglass blind flanges, threaded/threaded flanges, reducer flanges, ring flanges Type joint flange (RTJ), etc.

Low alloy steel ASTM A182 F11 flanges are used for a wide range of welding applications. Low alloy flanges are also known as carbon steel flanges. Different types of flanges serve different purposes. ASTM A182 F11 grade flange slips are used to join two seamless pipes together in precise locations.

Alloy steel A182 F1 threaded flanges are used in various industries such as chemical industry, power generation, defense industry, fertilizer industry, petroleum production, valve manufacturing and thermal power generation.

A low alloy steel flanges series mostly consists of approximately 0.5% to 9% of Chromium. And the content of Molybdenum in the alloy steel flanges ranges anywhere between 0.5% to 1% .

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

In case pipeline maintenance, we can remove screws on the flange, take away corresponding pipes or valves. Meanwhile to replace new pipes and valves.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

Several ANSI/ ASME standards use materials that are forged or cast to produce Cast AS Blind Flanges.

The A182 F11 Steel Long Weld Neck Flange (¡°LWN¡±) is similar to the regular A182 F11 Flange Weld Neck, the only difference is that the neck (tapered hub) is extended like a drilled hole extension. This type of flange is generally used on columns, containers or barrels. Alloy steel F11 long butt weld flange types are also available for Heavy Duty Barrel (HB) and Equal Barrel (E) types.

The Alloy Steel Weld Neck Flange has a welded neck onto it that holds larger pipes in place for easy welding and installation.

Despite adding these elements, low alloy steel flanges aren’t necessarily difficult to weld. The key to achieve a successful performance of the welding operation is by knowing exactly what type of low-alloy steel you have.

The Chromoly based F12 material specification are ideal for applications, where the piping systems are to transport or carrying corrosive fluids or gases at high-temperatures. Alloy Steel F12 Flanges they are used in various applications. Applications include chemical equipment, pharmaceuticals, gas processing plants, power generation tools, petrochemical industry, pulp and paper industry, on shore and offshore marine equipment, oil rigs, oil refineries, under water equipment, water desalination plants, condensers, heat exchangers and others.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength. Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

ASME SA182 ALLOY STEEL FLANGES
ASTM A182 Alloy Steel Flanges is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

Alloy Steel A182 F12 Flanges has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. Alloy Steel F12 Blind Flanges also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.

Alloy Steel F5 Flanges are square-shaped and are instrumental in interfacing pipes of nominal bore size without welding and are reasonable for high pressure hydraulic frameworks. ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 Gr F5 Blind Flanges are commonly used in petrochemical, pipe engineering, public services and water works.

These are flanges with creep strength and high resistance; therefore, steel threaded flanges help them work in the petrochemical industry.

The size of these forgings range from ? NB to 250 NB and length of these forgings is 2mm to 40mm.

The connection between the two pipes can be welded directly together, but it is difficult to join together without welding. When there is a problem with the connection part, it will be very difficult to fix. The same problem occurs between piping and valve connections. Flanges are usually used to connect pipes or valves, so the above problems can be easily solved.

Shaped flanges made by die forging or precision (lost wax) casting, depending on the mechanical properties of the flange, die forged flanges have higher strength than cast flanges. Precision profiled flanges manufactured by forging or casting require a model (tool).

They are ideal for applications carrying corrosive or high-temperature fluids or gases. Industries that could benefit from chrome moly flanges include: Oil and Gas, Refinery, Power Generation, and Chemical Processing.

Although acceptable fouling levels are considered beneficial to the alloy, in moderate cases, fouling deposits on Astm A182 F9 flange surfaces can act as a barrier to excessive corrosion. When flanges are produced using specification ASTM A182, they work well at high temperatures, albeit in applications with high pressure.

It is available in materials of ASTM A 182, and ASTM A 105. The flanges are available in various grades like ASME B16 47 ¡®A¡¯ Series, and ¡®B¡¯ Series to suit the needs of the clients and the industry.

ASTM A182 F9 Flanges
A182 F9 Alloy Steel Flanges is for use in small size and high pressure piping systems. Due to the small amount of chromium and molybdenum it has superior corrosion resistance and ductility.
Chrome Moly Alloy A182 F9 Flange two main alloying elements are chromium and molybdenum. It is useful in various industries and applications. Industries where it is useful are construction, automotive, energy, and oil and gas.

Our Alloy Steel Flanges are widely used in various industrial applications.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength.