A182 F9 flanges

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Carbon steel flange is a kind of rim formed at the end of the pipe when it is fixed on the pipe. It is used to seal the ends of pipes, valves or other connections. It has high tensile strength and is available with convex surfaces and supports for easy installation. It is an iron-carbon alloy containing up to 2.1 wt.% carbon. Carbon steel does not have minimum specified levels of other alloying elements, but it usually contains manganese.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

These flanges have excellent tensile and yield strengths and good elongation properties. ANSI B16.5 254 SMO Socket Weld Flanges For small high pressure pipes. These flanges are very strong and have 50% additional fatigue strength compared to normal slip flanges.

ASTM A182 F1 alloy steel flanges consist of carbon steel combined with one or several alloying elements such as manganese, silicon, nickel, titanium, copper, chromium and aluminum. Alloy steel F1 flanges are trusted by industries for properties such as corrosion resistance, durability and high tensile strength.

Alloy steel F1 butt weld flanges contain over 18% chromium and can be used at temperatures up to 870 degrees Celsius. As a leading manufacturer, we help to provide various Alloy Steel A182 F1 Butt Weld Flanges to our valued customers, which have different features such as corrosion resistance, perfect finish, fine finish, etc.

Alloy steel A182 F1 threaded flanges are used in various industries such as chemical industry, power generation, defense industry, fertilizer industry, petroleum production, valve manufacturing and thermal power generation.

ASTM A182 F5 butt weld flanges have some extraordinary features and characteristics. We give them dimensional accuracy, a fine surface finish, and excellent heat and rust resistance when handling highly corrosive environments. They have excellent resistance to crevice corrosion and stress corrosion cracking.

In our well-equipped manufacturing unit, the manufacture of AS ASTM A182 F5 butt weld flanges is carried out by experienced staff. We are using high quality raw materials sourced from trusted suppliers to accomplish this task. We follow a simplified work strategy to complete production within the stipulated time without compromising the quality and performance of the product. The entire manufacturing process is overseen by professionals who also guide our staff when necessary. Butt weld flanges are primarily used for high pressure applications over a wider temperature range from sub-zero to elevated temperatures.

Alloy Steel F22 Flanges as well provides outstanding pitting / crevice corrosion and resistance to general corrosion, which is superior to the conventional nickel-chromium austenitic alloys.

For high temperature functions with high carbon changes, stabilized alloy steel F22 butt weld flanges should be used. While it still has many of the properties of other grades, the addition of titanium content allows Alloy Steel F22 Socket Weld Flanges to avoid precipitation at high temperatures, even through prolonged exposure.

We can also supply special A182 Gr F11 flanges such as ASME SA 182 Gr F11 long butt weld flanges, customer special material requirements and high yield alloy steel F11 flanges. The chrome molybdenum A182 F11 flange is drilled so it matches the inside diameter of the pipe and therefore does not restrict product flow.

Alloys such as chrome-moly flanges exhibit better corrosion resistance. Especially in those environments where components are susceptible to oxidation or general corrosion. The molybdenum content in alloy steel lap flanges makes these components somewhat resistant to crevice and pitting corrosion, especially in those environments that contain both chloride and sulfur.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel flanges, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese. Low alloy steels contain trace amounts of alloying agents such as niobium, nitrogen, vanadium, copper, nickel, chromium, titanium, calcium, molybdenum, rare earth elements or zirconium. In order to strengthen chromium alloy flanges, elements such as copper, titanium, vanadium and niobium are added to the alloy.

ASTM A182 is the Standard Specification for Forged or Rolled Alloy Steel Pipe ASTM A182 F11 Flanges, Forged Fittings, and Valves and Parts. These alloy steel A182 grade F11 WNRF flanges are designed for high temperature applications.

Butt weld flanges are designed to be welded directly to adjoining pipes, creating an unrestricted flow of media in the pipe. Butt weld flanges are almost always sized to match the pipe to be welded in size and wall thickness/pipe plan. ANSI WN flanges are available in a variety of flange faces, namely Flat Face (FF), Raised Face (RF), Ring Joint (RTJ), to match various types of ANSI gaskets.

ASTM A182 F11 Type 1 flanges are a method of connecting two pipes, pumps and valves. This consists of chrome molybdenum based alloy steel grades. This is used to make pipes, boilers and superheaters. It is used and comes in various other sizes and shapes in many other applications.

Chrome Molybdenum A182 F11 Flanges are therefore manufactured by the Royal Sales Company as it is the best known and best known company in the steel industry. All products are tested with advanced tools before the product is brought to market.

ASTM A182 F11 Alloy Steel Flanges are used in the manufacture of flanges and fittings and in industries where low temperatures are observed and corrosion resistance is less important. These are available in convex or flat configurations. These are used in the plumbing industry, machinery, chemistry and many other fields. ASTM A182 F11 flanges are available in a variety of sizes and dimensions, such as 1/2″ to 36″. This is used for classes like 150#, 300#, 600#, etc. Various other types of flanges can be seen, which are also exported to various other industries.

A182 F5 alloy steel blind flanges can be applied to the ends of high pressure liquid and gas lines. In applications where piping must be covered and joined, use A182 F5 steel slip flanges. These flanges can have raised faces or collars.

Low alloy steel ASTM A182 F11 flanges are used for a wide range of welding applications. Low alloy flanges are also known as carbon steel flanges. Different types of flanges serve different purposes. ASTM A182 F11 grade flange slips are used to join two seamless pipes together in precise locations.

Butt weld flanges are typically used in high pressure applications where high or low temperatures are present. These steel butt weld flanges are circumferentially welded into the system at their necks, which means that the integrity of the butt welded area can be easily checked by radiography. These flanges reduce turbulence and erosion inside the pipe because the holes of the pipe and flange match.

Because the holes of the pipe and flange match. This also reduces high stress concentrations at the bottom of the butt welded pipe flange hub. This weld neck is favored in critical applications. The inner diameter of the butt weld flange is machined to match the inner diameter of the pipe.

We offer various types of long neck welded flanges to meet the needs of multiple engineering and process industries. These flanges meet the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE and are supplied with a mill test certificate according to EN 10204/3.1B.

These ASTM A182 Alloy Steel F12 Flanges are manufactured from high quality raw materials, so the manufactured products are of high quality. Additionally, these ASTM A182 Alloy Steel F12 Flanges are manufactured with the necessary standards, codes and guidelines in mind, resulting in a high quality product.

Alloy steel ASTM A182 F12 flanges are very cost effective in nature. Meanwhile, with these ASTM A182 F12 Alloy Steel Flanges, manufacturers can cut pipes to length effortlessly.

These ASTM A182 F12 alloy steel pipe flanges are suitable for high temperature and high pressure environments. ASTM A182 Alloy Steel Pipe Flanges are very easy to install and have a low hub due to the pipe going into the flange before welding. These flanges are available in different types such as slip flanges, blind flanges, butt weld flanges, socket weld flanges, orifice flanges, eyeglass blind flanges, threaded/threaded flanges, reducer flanges, ring flanges Type joint flange (RTJ), etc.

Alloy steel F5 A182 butt weld flanges are used for auxiliary industrial high pressure services such as condensers, evaporators, heat exchangers, etc. Alloy Steel F5 A182 Butt Weld Flange helps to connect pipes of nominal bore diameter without welding, suitable for high pressure hydraulic systems. Alloy steel F5 A182 sliding flanges are available in different diameter ranges, different sizes and different wall thicknesses according to different functions.

Alloy steel F5 A182 flanges also provide lap flanges, plate flanges, threaded flanges, reducer flanges and other forms. These flanges are widely used in power generation industry, gas processing industry, pharmaceutical industry, heat exchanger industry, seawater equipment industry, oil drilling companies, etc.

Alloy steel flanges are available in a range of alloy designs. These versatile flanges connect different pipe types and seal them securely throughout the system. The alloy content in these flanges can be high or low, depending on the application requirements.

a182 alloy steel welding neck flange1.7362 1.7386 Flanges with higher alloy content show excellent corrosion resistance and oxidation resistance. Generally, most alloy steel flanges contain iron and carbon. This gives these flanges exceptional strength and mechanical properties, making them excellent in stress-inducing systems.

Alloy steel face is a gasket used to seal flanged connections. Any damage, dents or rust in this area can cause the flange connection to fail. This can lead to serious financial problems in repairing or replacing the module. Furthermore, if the face is not protected, it will further delay the project, resulting in more capital losses.

The connection between the two pipes can be welded directly together, but it is difficult to join together without welding. When there is a problem with the connection part, it will be very difficult to fix. The same problem occurs between piping and valve connections. Flanges are usually used to connect pipes or valves, so the above problems can be easily solved.