astm a335

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Although blind flanges and certain reducing flanges could include plate as a material for construction.

It is available in materials of ASTM A 182, and ASTM A 105. The flanges are available in various grades like ASME B16 47 ¡®A¡¯ Series, and ¡®B¡¯ Series to suit the needs of the clients and the industry.

Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy
known for its corrosion resistance in a wide range of aggressive media.

The rim has numerous holes drilled into it that enables the flanged to be attached to a bolted flange. This design is far better because of the structural valve.

After hot working, forgings should be cooled to a temperature below 1000¡ãF (538¡ãC) prior to heat treatment in accordance with ASTM A182. Low alloy steels and ferritic and martensitic stainless steels shall be heat treated in accordance with ASTM A182.

Several ANSI/ ASME standards use materials that are forged or cast to produce Cast AS Blind Flanges.

ASTM A320 L7M Grade AS Fasteners are commonly used in oil and gas exploration and processing equipment – piping, piping and heat exchangers.

ASTM A182 Alloy Steel Forged Flanges are manufactured according to the ASTM A182 specification, which covers high pressure and high temperature service flanges covered by ASME B16.5, B16.47 and B16.48 standards.

ASTM A182 GR F5 flanges fall under the ASTM A182 specification.

In case pipeline maintenance, we can remove screws on the flange, take away corresponding pipes or valves. Meanwhile to replace new pipes and valves.

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

The austenitic formation of Alloy Steel F9 Weld Neck Flanges offers outstanding durability, even at cryogenic temp. Those are high tensile strength, anti-corrosive, flexibility, durability, low maintenance, good dimensional accuracy, excellent surface finishes.

Imperative for the uniqueness of Alloy Steel F9 Socket Weld Flanges is the allotropy of iron-that is, its existence in two crystalline structures. Alloy Steel(AS) F9 Long Weld Neck Flanges can be carbide of an alloying element such as titanium.

These a335 p10 pipes are great for a variety of purposes, whether you want to use them for oil or water injection activities, or even use these a335 p10 pipes for drainage. These a335 p10 pipes are made of solid metal for lifetime durability and are manufactured using techniques that involve either hot rolling or cold drawing. They can withstand high impact and are compression resistant.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

As one of the leading Alloy Steel Flanges Manufacturers in China we supply all different types of flanges in all material grades. Please contact us for your alloy steel flange needs.

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

The addition of chromium and molybdenum to a182 grade f9 enhances the corrosion resistance of the flange.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

This specification covers forged low alloy flanges for use in pressure systems manufactured to specified dimensions or industry standard dimensional specifications.

Our Alloy Steel ASTM A182 F5 Weld-neck Flanges are supplied to aid industrial, high pressure services like condensers, boilers, evaporators, heat exchangers, etc. Alloy steel F5 A182 flanges is also available in the form of lap joint flanges, plate flanges, threaded flanges, reducing flanges and many more. These flanges are widely used in power generation industry, gas processing industry, pharmaceutical industry, heat exchangers industry, sea water equipment industry, oil drilling companies and many more.

The flange connection mainly have leakage problem, and the leakage quantity should be controlled within the allowable range of process and environment.

The A335 Chromium (or Chromium) is the basic component of stainless steel. Any steel with 12% or more chromium is considered stainless steel. Chromium is almost irreplaceable in terms of resistance to oxidation at high temperatures. Chromium increases tensile, yield and hardness at room temperature.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

A182 F2 round bar has high strength, formability and hardenability.

Chromium molybdenum pipes under ASTM and ASME specifications A/SA 335 P1, P2, P11, P12, P15, P22, P91, P92, P122 are used in the power industry, while ASTM/ASME A/SA 335 P5, P9 are used in the petrochemical industry, It has strong crack resistance at high temperature and high pressure, can be used for hydrogen sulfide corrosion service, hydrogen attack and embrittlement cracking
Resistant to hot sulfide corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

N04400 is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Alloy N04400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acid-like substances), brine, hydrofluoric acid, and sulfuric acid. Other advantages of using this alloy are toughness and high strength over a wide temperature range; it can also be manipulated to be magnetic if desired.

Monel 400? is a nickel-copper alloy that is hardened by cold working only. The various types of available fittings are Monel Stub end, Monel Reducer, Monel End Cap Fittings, Monel tee, etc.

Astm a335 P91 pipe is a seamless pipe for high temperature applications. These pipes are made of ferritic alloy steel. Chemically speaking, a335 P91 welded pipe contains elements such as molybdenum (Mo) and chromium added to the alloy. The tensile strength of sa335 grade P91 pipe increases when molybdenum and chromium are added to the alloy. The tensile strength of a335 grade P91 pipe is 415 Mpa, while its yield strength is 205 Mpa. Pipe elongation ranges from 20% to 30%.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel flanges, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.