a335 p9 pipe

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

A335 grade p11 pipe is a seamless ferritic alloy based stainless steel pipe. The tube is a chrome molybdenum alloy. The presence of these two elements in the SA335 p11 pipe increases its mechanical properties.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

ASTM A182 Alloy Steel Forged Flanges are manufactured according to the ASTM A182 specification, which covers high pressure and high temperature service flanges covered by ASME B16.5, B16.47 and B16.48 standards.

Our Alloy Steel ASTM A182 F5 Weld-neck Flanges are supplied to aid industrial, high pressure services like condensers, boilers, evaporators, heat exchangers, etc. Alloy steel F5 A182 flanges is also available in the form of lap joint flanges, plate flanges, threaded flanges, reducing flanges and many more. These flanges are widely used in power generation industry, gas processing industry, pharmaceutical industry, heat exchangers industry, sea water equipment industry, oil drilling companies and many more.

The high chromium content gives these alloy steel socket weld flanges very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

Alloy steel pipes are common in applications involving automobiles, kitchenware, and industrial equipment. Typically, superalloy steel boiler tubes are used in applications with ambient temperatures exceeding 500¡ãC. For example, hollow and thin-walled alloy steel drill pipes must be able to resist pressure differences that manifest between the inside and the outside of these alloy steel seamless pipes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

A182-F11 is an American standard pearlitic structure heat-resistant steel forgings, the execution standard: ASTM-A182/A182M-2017.

A182-F11 has high thermal strength (¦Äb¡Ý440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion.

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.

ASME SA182 F5 pipe flange weight depends on wall thickness and nominal bore. The wall thickness of the flange is determined by the pressure rating.

ASTM A335 is the standard specification for seamless ferritic alloy steel pipe for high temperature service. Covers server levels: P1, P2, P5, P5b, P5c, P9, P11, P12, P15, P21, P22, P23, P91, P92, P122, of which P5, P9, P11, P22, P91, P92 are used in practice the most extensive. This specification covers nominal and minimum wall chrome-molybdenum (also known as Cr-Mo or Cr-Moly) alloy steel pipes for high temperature applications. Pipe ordered to this specification shall be suitable for bending, vanstoning and similar forming operations, and fusion welding. ASTM A335 P11, P22, P91 and P92 are commonly used in power plants and the chemical and petrochemical industries, while P9 and P5 are mainly used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P106

La especificacion ASTM A193 Grado B7 cubre los requisitos para materiales de empernado de acero aleado de alta resistencia para servicio de alta temperatura o alta presion y otras aplicaciones de proposito especial. Es una especificacion estandar que define la composicion quimica tipica, las propiedades mecanicas, los requisitos de dureza, el tratamiento termico preferencial, el marcado del producto, la certificacion y otros requisitos para las conexiones atornilladas utilizadas en el servicio de recipientes a presion, valvulas, bridas y accesorios. ASTM A193 define unidades SI (metricas) y pulgadas-libras.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres.

A182-F11 has good process performance and welding performance, and high durable strength at 500 ~ 550¡æ.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

These Alloy Steel F12 Lap Joint Flanges are made up of in dissimilar grades of standard ranges and meet its terms through national and international standards. Alloy Steel ASTM A182 F12 flanges are exceptionally resistant to corrosion in nature. In the interim, fabricators can cut pipe to length without inconvenience for these ASTM A182 F12 Alloy Steel flanges.

For A335, chromium is a key ingredient used to make stainless steel. If the chromium content is above 12%, it can be classified as stainless steel. Even at high temperatures, the antioxidant potential of chromium is irreplaceable. Better hardness, tensile strength and yield strength at standard temperature. Due to the material’s composition, it is ideal for use in power plants, refineries, petrochemical plants and other oilfield services involving high temperature and high pressure transportation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P108

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

The alloy has great mechanical properties at subzero temperatures.For catering to the needs of our customers better, it is essential that we manufacture Monel Pipe Fittings in different types, with each one serving some specific purpose.

Alloy Steel F12 slip on Flanges are made up of chromium molybdenum steel alloy and therefore have a high rupture resistance. They are also preferred due to their light weight because of the low carbon and high alloy nature.Alloy Steel ASTM A182 flanges are very simple to install and have a low center because the pipe occasionally trips into the flanges after welding.

Chromium molybdenum pipes under ASTM and ASME specifications A/SA 335 P1, P2, P11, P12, P15, P22, P91, P92, P122 are used in the power industry, while ASTM/ASME A/SA 335 P5, P9 are used in the petrochemical industry, It has strong crack resistance at high temperature and high pressure, can be used for hydrogen sulfide corrosion service, hydrogen attack and embrittlement cracking
Resistant to hot sulfide corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

The high chromium content gives these forgings fittings very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

Whether manufactured to ANSI, ASME or custom standards, flanges are critical to manufacturing, utility and industrial applications around the world.

ASME SA 335 P91 alloy steel pipe also has some excellent properties such as strong construction, precise dimensions, corrosion resistance and more. Our line of ASTM A335 P91 Alloy Steel Pipe is perfectly engineered in tubular form and in a variety of sizes.

Unlike the bends, the elbows can reduce the pressure applied on the walls when turning the fluid flow direction.Fittings made from WPHY 52 material are known to have a long work life, durable, tough and hard. The WPHY 52 properties make these fittings a perfect cost saving solution for a variety of industries.

ASTM A335 P22 pipe specifications include seamless “chrome molybdenum” alloy steel pipe and alloy steel pipe. Chromium is an important compound in stainless steel. Any steel with 12% or more chromium is considered stainless steel. Unrivaled chromium resists oxidation at high temperatures.

ASTM A335 alloy is the steel pipe defined according to the production bill of materials (or material). As the name implies, the alloy pipe and the seamless steel pipe are defined according to the production process (seamless seamless). The difference between the seamless pipe is the welded pipe, including the straight seam welded pipe and the seamless steel pipe. Spiral tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

Hot rolled 4140 steel bar is a medium carbon alloy steel with high hardenability. This grade is also widely used in forging.

Grade B7 is a heat treated chromium molybdenum low alloy steel with a minimum tensile strength requirement of 125 ksi (860 Mpa), a yield strength of 105 ksi (720 Mpa) and a maximum hardness of 35HRC. Boltport produces B7 headed and headless bolts from alloy steel AISI 4140 bar stock or forgings. A193 Grade B7 is the most commonly used bolting size, plus A194 Grade 2H nuts are used for bolting carbon steel pipe. A193 B7 bolts are available in metric sizes from M6 to M180 and imperial sizes from 1/4 to 7 inches in diameter.

WPHY 52 Fittings are recommended be heat treated by one or more of the following procedures: annealing (stress relieving), normalizing, normalizing and tempering, quenching and tempering.Made utilizing high-grade crude materials, these ASTM A860 WPHY Pipe Fittings are anti-corrosive and strong.