Incoloy 800 1.4876 Round Bar Manufacturer UNS N08800 rod

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The nickel content of Alloy 825 makes it resistant to chloride stress-corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels.

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

DIN 1.4876 Rounds can work over a range of temperatures and pressures and exhibit excellent mechanical properties. These components have a minimum tensile strength of 600mpa and a minimum yield strength of 275mpa. ASTM B408 Incoloy 800 Precision Ground Rods are designed to have a uniform cross section. The strips are dimensionally and geometrically accurate.

The higher strength results from close control of carbon, aluminum, and titanium contents in conjunction with a high temp anneal.

Monel bolts, such as Monel 400 and K500, are made of nickel-copper alloys and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. A standout feature of Monel bolts is their excellent resistance to hydrofluoric acid, a particularly difficult acid to handle, at all concentrations up to the boiling point. For hydrofluoric acid applications, Monel bolts are probably the most corrosion resistant of all commonly used specialty alloys.

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

Inconel 800, 800H and 800HT are nickel-iron-chromium alloys with excellent strength and good rust and carburization resistance at high temperature exposure. These types of nickel metal alloys are the same except that the 800H alloy has a higher carbon content, and about 1.20% aluminum and titanium are added to the 800HT alloy.

These tubes can be readily welded in place following common welding process without requiring a matching filler metal.

They can also resist aqueous corrosion and hence can be used in marine applications.

For service requiring optimum creep and rupture properties, Incoloy 800H or 800 HT are used. The high contents of nickel and chromium in the alloys also give good corrosion resistance.

In power generation, superheater and reheater tubing has also employed the material 800HT.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

The bolt is a nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature environments. Inconel 800HT Hex Bolts are an austenitic high strength solid solution Ni-Fe-Cr alloy with controlled levels of C, Al, Ti, Si and Mg with increased (Al + Ti) content. Inconel 800HT Heavy Duty Hex Bolts are used in a variety of applications involving exposure to corrosive environments and high temperatures, such as heat treatment equipment, chemical and petrochemical processing, nuclear power plants and the pulp and paper industry.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

They can be used in pressure vessels with a wall temperature of 800 degrees F. They also offer good resistance to stress corrosion cracking.

Incoloy 800 Sheets are a combination of nickel, chromium and iron alloys with advantages and properties such as excellent oxidation resistance, high temperature carburization and medium or high strength and excellent resistance to name a few.

Nickel 800H reducing butt welded pipe fittings are also used in heat exchangers, dampers, pressure vessels, etc. Our Alloy 800HT Elbow Butt Weld Fittings can also be used in industrial furnaces and heat treating equipment.

Incoloy Alloy 800HT applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service.

The addition of titanium stabilizes Alloy 825 against sensitization in the as-welded condition making the alloy resistant to intergranular attack after exposure to temperatures in a range that would sensitize un-stabilized stainless steels.

Incoloy Alloy 800 is widely used in equipment that must have high strength and resistance to oxidation, carburization and other harmful effects of high temperature exposure. For services requiring optimum creep and rupture properties, use Incoloy 800H or 800 HT. The high content of nickel and chromium in the alloy also provides good corrosion resistance.

Incoloy 825 is a nickel-based alloy generally similar to Alloy 20 in water corrosion. It has useful resistance to boiling sulfuric acid up to 40% strength, 60% strength at 176¡ãF, and 150¡ãF at all concentrations.

Alloys 800H and 800HT are iron-nickel-chromium solid solution strengthened alloys with a nominal chemical composition of 42% iron, 34% nickel, and 22% chromium.

ASTM B408 Incoloy 825 bar is titanium stabilized to resist pitting and intergranular corrosion after fabrication, especially welding, including heating in the critical sensitization temperature range (650¡ãC – 760¡ãC).

For high temperature applications requiring optimum rupture and creep properties, Alloy 800H Plate (UNS N08810 Plate) and Alloy INCOLOY 800HT Coil (UNS N08811 Coil) are used. These are also known as WNR 1.4876Sheets, WNR 1.4958 Plates, and WNR 1.4859 Coils.

Alloy 800H is a solution heat treated (2100¡ãF/1150¡ãC), controlled-carbon version of alloy 800 with improved elevated temperature properties. It has improved creep and stress-rupture characteristics in the 1100¡ãF (593¡ãC) to 1800¡ãF (982¡ãC) temperature range.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Inconel 725 bolt material meets ASTM B446, B564, F467, F468, UNS N06725, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for demanding strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Incoloy 825 alloy pipe is made from basic elements such as iron, nickel and chromium, which provide basic rust and pitting resistance at ambient temperatures. This alloy has elements such as molybdenum, titanium and copper added in small parts, adding more to the product and increasing its machinability even in marine conditions.

INCOLOY Alloy 800 can be hot worked in the temperature range of 871-1232¡ãC (1600-2250¡ãF).