ASTM B564 UNS N08825 Flange

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800HT RTJ Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The chromium and molybdenum content of Alloy 825 provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres.

INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures. High creep strength is attained through control over crystal grains¡ªvia high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content. Nippon Yakin provides this product in plate, sheet, and strip forms.

The 800 series alloys were developed in the 1950s. At the time, nickel was in high demand for defense. To create heat and corrosion resistant materials with lower nickel content for commercial use, the 800 series alloys are made. Incoloy 800 has 2 notable changes. Alloy 800H (UNS N08810) limits the carbon content to the higher end of the acceptable range for Incoloy 800. Alloy 800 HT (UNS N08811) limits the carbon, aluminium and titanium content all to the high end. The advantages of confined chemistry result in higher creep strength and stress rupture performance.

Alloy 800 – The 800 series of alloy (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

Inconel 800, 800H and 800HT are nickel-iron-chromium alloys with excellent strength and good rust and carburization resistance at high temperature exposure. These types of nickel metal alloys are the same except that the 800H alloy has a higher carbon content, and about 1.20% aluminum and titanium are added to the 800HT alloy.

For applications requiring greater resistance to stress rupture and creep, especially at temperatures above 1500¡ãF (816¡ãC), INCOLOY alloys 800H and 800HT are used.

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium.

INCOLOY 800/800H/800HT is a family of high nickel superalloys commonly used in the petrochemical processing industry. INCOLOY 800HT is similar to INCOLOY 800/800H, but with improved creep rupture strength. All of these alloys have high corrosion resistance. At higher temperatures, Incoloy 800 fasteners provide resistance to vulcanization, carburization and oxidation, as well as fracture and creep strength. Incoloy 800 bolts are a solid solution austenitic alloy. Appearing in the microstructure of Incoloy 800 are chromium carbide, titanium carbide and titanium nitride. Incoloy 800H Hex Head Bolts are easy to machine using standard methods. Thermoforming of Incoloy 800 is done in the temperature range of 870 to 1200 ¡ãC (1600 to 2200 ¡ãF). Incoloy 800 screws are used in power plants.

Incoloy 800, 800H and 800 HT are premium alloys composed of a combination of iron, nickel and chromium that provide excellent strength and better resistance to rust and carburization to avoid exposure to extreme high temperature conditions.

Nickel-based alloys are very useful materials for making high-quality tubular products. One of the key reasons is their excellent corrosion resistance in both waterborne and high temperature applications.

Alloys 800H and 800HT are iron-nickel-chromium solid solution strengthened alloys with a nominal chemical composition of 42% iron, 34% nickel, and 22% chromium.

We offer high quality Incoloy 825 rods in a variety of material grades, gauges and sizes. Our high-grade Incoloy 825 rods offer outstanding features such as robust design, cost-effectiveness, durability and an excellent finish.

The bolt is a nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature environments. Inconel 800HT Hex Bolts are an austenitic high strength solid solution Ni-Fe-Cr alloy with controlled levels of C, Al, Ti, Si and Mg with increased (Al + Ti) content. Inconel 800HT Heavy Duty Hex Bolts are used in a variety of applications involving exposure to corrosive environments and high temperatures, such as heat treatment equipment, chemical and petrochemical processing, nuclear power plants and the pulp and paper industry.

SB564 UNS N02200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800 fasteners resist oxidation at high temperatures, a problem with most stainless steel alloys. Fasteners made from Incoloy 800 are also in great demand in petrochemical and chemical processing. Even when exposed to very high temperatures, Incoloy 800H fasteners maintain a very stable structure, making them very practical and sought after in many industries.

High performance nickel alloys for sour oil and gas fields. ASTM B407/B358 Incoloy 800 pipe-hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages, such as high strength, toughness, low magnetic permeability, and excellent corrosion resistance. ASTM B407/B358 Incoloy 800 pipe has proven to be a valuable and versatile material that can solve a variety of design and application problems. ASTM B407/B358 Incoloy 800 pipe resists low temperature aggressive corrosive environments as well as harsh high temperature environments. This alloy has excellent weldability and is able to join very successfully with other alloys with different compositions.

UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Bolts and Nuts fall under the ASTM B166 specification for hot and cold work Inconel 600 bar, bar bolts and nuts. Standards vary from DIN, ASTM, BS and all other international standards. Inconel 600 fasteners can vary in length from custom lengths and 3mm to 200mm, and also in sizes from M3 to M56 and 3/6″ to 2″. There are different types of bolts and nuts in Alloy 600 Fasteners such as T-Nuts, Panel Nuts, Coupling Nuts and Lag and Hex Bolts.

The principle di?erence between alloys 800H and 800HT is the restricted aluminum and titanium content in 800HT, which results in higher creep and stress rupture properties.

Chemically, Incoloy fasteners are composed of nickel, iron and chromium as the primary alloy materials. In addition to these elements, trace amounts of molybdenum, copper and titanium are added to the B425 N08825 alloy. Components made from this alloy, including various Inconel 825 bolts and nuts, are less prone to deformation. This is because the alloy has a stable FCC microstructure. Like many conventional austenitic grade stainless steels, Alloy 825 threaded rod has a stable austenitic structure.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

Alloy 800 round bars are used for service at low temperatures, and 800 is also resistant to water corrosion. Incoloy Alloy 800 round bar provides high strength and resistance at elevated temperatures. We supply UNS N08800 round bars in a variety of sizes and thicknesses according to customer requirements.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

Nickel is a costly commodity, which is why its use in an alloy elevates its cost.

ASTM B462 UNS N08020 Slip On Flange Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.