Nimonic 80A hex scoket head cap screw 1-4 grade 2 1-2 in. bolt

Hastelloy X is a nickel-chromium-iron-molybdenum alloy. It has excellent oxidation resistance, workability and high temperature strength. It also exhibits good resistance to stress corrosion cracking in petrochemical applications. It shows very good ductility after prolonged exposure at 1200 to 1600 degrees Fahrenheit. It has excellent forming and welding properties, and is widely used in furnaces for aircraft and gas turbines.

Inconel 600 Bolts can also be easily formed, machined and welded. The minimum tensile strength of fasteners can reach 825MPa, and the minimum yield strength can reach 620MPa. The strongest are cold-worked round fasteners.

As an austenitic and nickel-based alloy, Alloy 926 nuts are ductile over a wide temperature range from low temperatures to over 1000 degrees Fahrenheit (538 degrees Celsius). Machinability is typical of nickel-based alloys, with alloy 926 bolts that can be easily welded and formed using a variety of techniques.

In addition to good corrosion resistance and high tensile strength, Duplex 2205 Hex Bolts also have high surface toughness. This and the passive oxide layer formed by the addition of chromium is the reason why 2205 duplex stainless steel fasteners are used in the marine industry.

INCONEL 625 is a high nickel superalloy commonly used in the oil and gas, petrochemical, aerospace and gas turbine industries. In addition to high resistance to pitting and crevice corrosion, it has excellent mechanical strength. Inconel 625 fasteners also have a melting point of 1290 to 1350 degrees Celsius. This enables them to operate at high temperatures. High temperature resistance, corrosion resistance and high strength make UNS N06625 Class 2 fasteners useful in power plant, chemical, medical and food processing industrial applications.

There are different sizes according to different standards of ASTM B574 UNS N10276 Fasteners. Hastelloy C276 alloy is very easy to manufacture and does not require heat treatment after welding. Hastelloy C276 alloy excels in many industrial applications (i.e. chemical processing).

Alloy 20 bolts offer users a combination of nickel, chromium, molybdenum, and copper which provides good general corrosion resistance. Alloy 20 (2.4660) bolts are best suited for mid-range corrosion use ¨C better than steel alloys but not at the level of high performance nickel based alloys like Hastelloy C276.

Monel 400 is resistant to steam and sea water as well as highly corrosive solutions such as sulfuric, hydrochloric and hydrofluoric acids after degassing. It has excellent solderability and can withstand very high pressure and weight. The alloy has excellent mechanical properties at sub-zero temperatures, with a melting point of 2370¡ã – 2460¡ã F, and the product can be used at temperatures up to 1000¡ã C.

HT PIPE manufactures Inconel Alloy 718 fasteners such as nuts, bolts, socket head cap screws, washers, studs, studs, socket head cap screws, countersunk socket head screws and machined parts as well as hot forgings.

Nimonic 80 a (Alloy 80A) is one of the most popular superalloys specified for gas turbines. Nimonic 80A fasteners are often specified because of their ability to withstand very high temperatures.

Inconel 625 is a high performance nickel-chromium-molybdenum alloy known for its high strength, temperature and corrosion resistance. This superalloy is primarily composed of nickel (at least 58%), followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace amounts of manganese, silicon, aluminum, and titanium.

Alloy 20 Heavy Hex Nuts, also referred to as structural nuts, are both thicker and wider than a standard (finished) hex nut and compatible with high strength and large diameter bolts. Nuts in sizes 7/16″ and smaller are double chamfered. Nuts larger than 7/16″ are either double chamfered or chamfered on top with a washer faced bearing surface. They are most commonly used in construction and engineering applications and paired with heavy hex (structural) bolts.

INCONEL 718 is a high nickel superalloy commonly used in the oil and gas, petrochemical and gas turbine industries. It has excellent mechanical strength, in addition to high corrosion resistance.

INCONEL 625 is used in offshore and aerospace industries, but also in pollution control equipment.

The results reveal that Inconel 625 is excellent in resist the corrosion attack in seawater. However, at increasing temperature, the corrosion resistance of this metal decrease.

HASTELLOY G-30 alloy is a high-chromium nickel-based alloy that exhibits corrosion resistance superior to most other nickel- and iron-based alloys in commercial phosphoric acid and in many complex environments containing highly oxidizing acids such as nitric/hydrochloric acid, Nitric/hydrofluoric and sulfuric acid. The resistance of G-30 alloy to the formation of grain boundary precipitates in the heat affected zone makes it suitable for the as-welded condition in most chemical processing applications.

It is well known that Hastelloy c22/C276 fasteners have good dimensional accuracy, corrosion resistance, durability, high durability, high flexibility, strong structure, high tensile strength and other characteristics. In addition, fasteners are resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

Alloy 20 Bolts are made up of a nickel chromium alloy that has 32.5% nickel, 19% chromium, carbon, copper, molybdenum, manganese, silicon, columbium and iron in the composition.?The material is also known as carpenter 20 for its usage in wooden applications.

Inconel 625 bolts can be used in a variety of corrosive environments due to their ability to prevent stress corrosion, crevice corrosion and pitting corrosion. In mild applications such as atmospheric, fresh or salt water, neutral salts and alkaline media are almost completely tolerated. In more severe cases, nickel and chromium content provides resistance to oxidizing chemicals. Inconel 625 bolts are also resistant to non-oxidizing environments.

Alloy31 is a nitrogen-added iron-nickel-chromium-molybdenum alloy. This alloy fills the gap between special alloys austenitic stainless steels and nickel alloys. Alloy 31 has been proven in the chemical and petrochemical industries, ore extractors, environmental and marine engineering, and oil and gas production.

Hastelloy C276 Bolts and Nuts can be used in harsh and harsh environments including acid, alkaline, brackish and salt water environments. Hastelloy c276 hex bolts are used in acetic and organic acid production plants. The material has excellent acid resistance to strong oxidants. Hastelloy C276 fasteners are fasteners made from an alloy containing nickel as the base element, which contains chromium and molybdenum, with the addition of tungsten.

The 800 series alloys were developed in the 1950s. At the time, nickel was in high demand for defense. To create heat and corrosion resistant materials with lower nickel content for commercial use, the 800 series alloys are made. Incoloy 800 has 2 notable changes. Alloy 800H (UNS N08810) limits the carbon content to the higher end of the acceptable range for Incoloy 800. Alloy 800 HT (UNS N08811) limits the carbon, aluminium and titanium content all to the high end. The advantages of confined chemistry result in higher creep strength and stress rupture performance.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Inconel Alloy 718 is a high-strength, corrosion-resistant nickel-chromium material that can be used in temperatures from -423¡ã to 1300¡ãF. Alloy 718 for the petroleum industry is heat treated to a hardness not exceeding 40HRC, the maximum value allowed by NACE MR-01-75 to prevent stress corrosion cracking.

Corrosion rates are generally accelerated in aqueous media. However, due to the alloy’s strong nickel and chromium chemical base, the corrosion rate of nickel alloy 601 hex bolts is much lower.

Alloy B (UNS N10001) was developed to resist hydrochloric acid. Hastelloy B2 has replaced it. Alloy B3 (UNS N10675) is a newer variant with higher thermal stability. These alloy B2 bolts are a wrought nickel molybdenum alloy that can be used in the as-welded condition. It is highly resistant to hydrochloric acid of all concentrations and temperatures. Known as UNS N10665 bolts, these bolts are also resistant to stress corrosion cracking and pitting.

Hastelloy 276 bolts and fasteners are suitable for most chemical applications in the welded condition. However, it should be noted that in environments where C-276 alloy weld joints are subject to attack, C-22 weld filler material should be considered. Hastelloy C276 socket head cap screws also have excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres up to 1900¡ãF.

These Inconel 718 fasteners do not lose strength despite exposure to extreme temperature ranges. Alloy 718 bolts are used in cryogenic storage tanks due to their good mechanical and physical properties in extremely cold environments.

Monel K500 (alloy K500), UNS N05500 (QQ-N-286), is a precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of Monel alloy 400 with greater strength (over 2x as strong) and hardness. It also has low permeability and is nonmagnetic to temperatures as low as -150¡ãF (-101¡ãC).

Essentially, Monel 500 is an age-hardened version of Monel 400. This means that Monel 500 is harder and more resistant to corrosion than Monel 400. This material can be used in sour gas applications. Monel K500 Studs maintain corrosion resistance even in high velocity seawater. Hence, these applications are in seawater and marine engineering applications as well as in shipbuilding applications.